Bartolini 7-String Original G6 Candybar (108G67J B1/T1), Set, Black

Based on our legendary Original series J-Bass pickups with dual-inline, split coils, these pickups cancel hum while providing that full and warm vintage tone you've been craving, enhancing the natural voice of your bass. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups.

• Original G6 Candybar pickup set for electric bass
• 7-string version
• deep voiced and hum-cancelling
• classic 90s design with input from Bill Dickens
• split-coil, dual inline hum-killing
• magnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for neck and bridge pickups
• DC resistance bridge position 11.1 kOhm
• DC resistance neck position 9.8 kOhm
• resonant frequency bridge position 4.9 kHz
• resonant frequency neck position 5.8 kHz
• 72 - 108 mm / 2.83" - 4.25" sensing width
• 2-conductor, shielded coaxial cable, core hot
• passive
• black cover
• dimensions (L x W x H) 140.2 x 23.7 x 24.1 mm / 5.52" x 0.93" x 0.95" (height incl. cable)
• screws and springs are not included
• Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return.
• Note: The return and refund policy does not apply to pickups if their cables have been cut or other damage affecting the condition of the goods is present.

Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint.