Wireless Systems

The AIR P05 is also designed with portability and ease of use in mind; weighing only 85 grams, this compact device can easily fit into a gig bag or backpack. The user-friendly interface, including a simple power switch and channel selection button, makes it easy to set up and operate, allowing guitarists to focus on their performance. MOOER’s commitment to quality and innovation is evident in the AIR P05. This wireless system is practical and durable, built to withstand the rigors of regular use. Its sleek design and reliable performance make it a must-have tool for any guitarist looking to enhance their setup with a professional-grade wireless solution.digital wireless system for guitars, basses and other instruments4 switchable channels allow parallel use of 4 systemsrechargeable 400 mAh battery for long battery lifeautomatic sleep moderange up to 20 m (without obstacles)less than 7 ms latencyfrequency range 20 - 20,000 Hz2.4 GHz ISM band for worldwide use-16 bit / 48 kHz A/D converter95 dB dynamic rangeruns up to 8 hours per battery charge (1.5 hrs for a full charge)On/Off/Channel Switchstatus LEDs shows selected channel and indicate battery lifeUSB Type-C connectordimensions (L x W x H): 125 x 30 x 20 mm / 4.92" x 1.18" x 0.79"weight 85 g / 0.19 lbsincl. USB charging cableNote: The system is not compatible with active electronics or pickups.

The Mooer AP10 Air Plug gives you a completely wireless guitar system that boasts a range of up to 15 m (45 ft.) while maintaining a low-latency connection to your amp or pedalboard. Following the tradition of the Mooer Micro Series effects pedals, the AP10 sports a slim form factor that easily fits in to your case or gig bag without the need for any bulky battery packs or base stations. Each set comes with one receiver and one transmitter unit that can be set to one of four separate channels. This allows you to choose between different channel frequencies to find the best connection for your environment as well as allowing you to use multiple AP10s at the same time. Multi-receiver functionality allows for flexibility, such as with a stereo amplifier setup, utilizing a single transmitter to separate receivers in each amplifier. Simply make sure all receivers and transmitter are on the same channel, and you're good to go! Power Saving Mode automatically kicks in whenever there is a break in the action to conserve battery life and comes alive again as soon as you start playing. This gives the AP10 enough battery to keep you going through long jam sessions or those second and third encores. Charging is achieved easily via USB wall charger or PC and both the transmitter and receiver can be charged simultaneously with the included split charging cable.digital wireless system for guitars, basses and acoustic instruments with piezo pickups4 switchable channels allow parallel use of 4 systemsbuilt-in rechargeable lithium battery range up to 15 m / 45 ft.less than 5 ms latencyfrequency range 20 - 20,000 Hz 2.4 GHz ISM band for worldwide use24 bit / 48 kHz A/D converter for uncompressed digital transmission> 103 dB dynamic range< 0.05% total harmonic distortion (THD)runs up to 5 hours per battery chargePower Saving mode extends the battery lifeOn/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifedurable ABS composite housingincl. USB charging cable and transport bagdimensions (W x D x H): 117 x 42 x 30 mm / 4.6" x 1.6" x 1.2"

Introducing MOOER’s latest addition: the GTRS PTNR GWR4 Wireless Receiver. This compact device packs quality and convenience, allowing musicians to release their creative output with ease. The GTRS PTNR GWR4 Wireless Receiver pairs with the GWU4 INST plug (to be purchased separately) or GTRS S900/W900 Intelligent Guitar (which has a built-in wireless transmitter), and can receive signal within a 20-metre range. Simply plug the GWU4 INST into your instrument via the ¼ jack input, pair it with the GWR4 Wireless Receiver and record directly into a smartphone or tablet. The GWR4 connects to a smart device via OTG cable, and with a low noise, low distortion circuit design, outputs high-quality audio. With optimized input dynamic technology, players can also enjoy realistic MOOER Intelligent Series Device tones.UHF Wireless Receiverenables wireless OTG recording on your smartphone or tabletlightweight and compact design4 switchable channelswireless pairing with GWU4 INST plug (not included) or GTRS Intelligent Guitar (with built-in wireless transmitter)rechargeable 800 mAh battery for long battery liferange up to 20 m / 65 ft. (without obstacles)up to 5 hours battery life per chargeUHF low noise and low distortion circuitryOn/Off switchVolume controlUSB Type-C connector3.5 mm stereo jack outputincl. USB Type-C cable, USB Type-C to Lightning converter, USB Type-C to USB Type-C converterNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

After launching the GTRS guitar in 2021, Mooer offers the GWU4, an advanced plug-and-play wireless system for even more freedom on the go. The GWU4 is an ultra-high frequency wireless guitar system that is compatible with all instrument types. This UHF technology provides a stronger signal to increase transmission range and reduce unwanted interference from other electronic devices. In addition to greater stability, the ultra-high frequency system has a range of up to 30 metres (98 ft.)! Each set includes a transmitter and a receiver, each with 4 selectable channels. This allows you to bypass unwanted interference in one frequency range or use up to 4 systems in parallel. Each unit has an 800 mAH battery for excellent battery life and a battery level indicator. The scope of delivery also includes a Y-USB cable with which both dongles can be charged simultaneously via a single cable.UHF wireless system for guitars, basses and other instruments4 switchable channels allow parallel use of 4 systemsrechargeable 800 mAh battery for long battery lifeY-USB Type-A to Type-C charging cable for comfortable, simultaneous charging of transmitter and recieverrange up to 30 m / 98 ft. (without obstacles)less than 3 ms latencyFrequency range 20 - 20.000 Hz103 dB dynamic rangeruns up to 6 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel switchstatus LED shows selected channel and indicate battery lifeUSB Type-C connectorincl. Y-USB Type-A to USB Type-C charging cabledimensions (L x W x H): 190 x 30 x 20 mm / 7.49" x 1.18" x 0.79"green finishNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

After launching the GTRS guitar in 2021, Mooer offers the GWU4, an advanced plug-and-play wireless system for even more freedom on the go. The GWU4 is an ultra-high frequency wireless guitar system that is compatible with all instrument types. This UHF technology provides a stronger signal to increase transmission range and reduce unwanted interference from other electronic devices. In addition to greater stability, the ultra-high frequency system has a range of up to 30 metres (98 ft.)! Each set includes a transmitter and a receiver, each with 4 selectable channels. This allows you to bypass unwanted interference in one frequency range or use up to 4 systems in parallel. Each unit has an 800 mAH battery for excellent battery life and a battery level indicator. The scope of delivery also includes a Y-USB cable with which both dongles can be charged simultaneously via a single cable.UHF wireless system for guitars, basses and other instruments4 switchable channels allow parallel use of 4 systemsrechargeable 800 mAh battery for long battery lifeY-USB Type-A to Type-C charging cable for comfortable, simultaneous charging of transmitter and recieverrange up to 30 m / 98 ft. (without obstacles)less than 3 ms latencyFrequency range 20 - 20.000 Hz103 dB dynamic rangeruns up to 6 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel switchstatus LED shows selected channel and indicate battery lifeUSB Type-C connectorincl. Y-USB Type-A to USB Type-C charging cabledimensions (L x W x H): 190 x 30 x 20 mm / 7.49" x 1.18" x 0.79"white finishNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboardscompatible with XVive U2 guitar wireless system2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type A charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincl. two antennas, USB charging cable, mounting screws, and counter nuts

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboards, incl. wireless transmitter2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type C charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincluding wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

spare antenna for RockBoard Mod4 2.4 GHz Guitar Wireless Receiver

Foot control the playback, loop, speed and pitch of video & audio on iOS, Android, Mac and PC. Touch less. Play more. Hands-free control of your YouTube lesson or music file as you learn, practice, jam and transcribe, so your hands and mind can 100% focus on the instrument instead of constantly touching the screen or keyboard. Compatible with most online video platforms and local audio & video files running on Android, iOS, Mac and PC. Access all your content via the dedicated App or Browser Extension. The pedal is out of the box and seamlessly works with all your content. The pedal can also be a page-turner for hands-free control of turning pages, teleprompting, reading music, scrolling lyrics and tabs, etc.smart multi controller / wireless footswitchcontrols and switches video, audio and text content on smartphone, tablet or computer via Bluetoothcompatible with most online video platforms and local audio and video files running on Android, iOS, Mac and PCallows you to play, pause, fast-forward, rewind and rewind to start, loop any section and change speed and pitchideal for controlling YouTube lessons or music files while learning, practising, jamming and transcribing, or hands-free control of turning pages, teleprompting, reading music, scrolling lyrics and tabs, etc.additional page-turner modebuilt-in metronomerechargeable battery guarantees 300 hours of wireless use between charges5 footswitches with status LEDsintuitive app for editing all settings30 m (98 ft.) wireless communication rangebattery can be charged with 5V - 9V DCPower on/off switchpower supply via optional 9V DC adapter, 2.1 mm x 5.5 mm barrel plug, polarity (-) insiderobust aluminium housingdimensions (L x W x H) 300 x 70 x 45 mmweight 700 gNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

In order to offer customers more wireless frequency options, Xvive has developed a wireless system that uses the 5.8 GHz band: the A58 Guitar Wireless System. The 5.8 GHz is a less crowded frequency, so it’s less likely to encounter signal interference; the 2.4 GHz frequency, meanwhile, performs better than 5.8 GHz when there are obstacles between the transmitter and the receiver. The A58 System has been fine-tuned for improved performance and guitar tone.digital wireless system for guitars, basses and other instruments6 switchable channels allow parallel use of 6 systemsscans for wireless status and selects the best channelcompatible with active and passive pickupsbuilt-in rechargeable 780 mAh lithium batteryrange up to 30 m / 100 ft. (without obstacles)< 5 ms latencyfrequency range 20 - 20,000 Hz5.8 GHz ISM band for worldwide use24 bit / 48 kHz A/D converter110 dB dynamic rangeruns up to 5 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifeaccess to the battery compartment makes it easy for professional maintenance and testing on the battery as needed, giving you increased mileagedurable ABS composite housingUSB Type-C socketincl. carry case, USB charging cableNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

In order to offer customers more wireless frequency options, Xvive has developed a wireless system that uses the 5.8 GHz band: the A58 Guitar Wireless System. The 5.8 GHz is a less crowded frequency, so it’s less likely to encounter signal interference. The A58 System has been fine-tuned for improved performance and guitar tone. The Xvive BCA58 Charging Case is specially designed for the A58 Guitar Wireless System. It’s an all-in-one solution that integrates storage, charging, and portability, tailored for performers and musicians. With its three core functions - secure storage, fast charging, and extended battery life - it’s the ideal companion for your A58 system, whether on stage, in the studio, or on the go. Equipped with a high-capacity internal battery, the BCA58 allows multiple full or partial recharges for both the A58 transmitter and receiver. The custom-molded interior ensures your gear stays secure and protected in transit, making it a reliable power and storage solution for live gigs, rehearsals, and travel.digital wireless system for guitars, basses and other instruments with charging case6 switchable channels allow parallel use of 6 systemsscans for wireless status and selects the best channelcompatible with active and passive pickupsbuilt-in rechargeable 780 mAh lithium batteryrange up to 30 m / 100 ft. (without obstacles)< 5 ms latencyfrequency range 20 - 20,000 Hz5.8 GHz ISM band for worldwide use24 bit / 48 kHz A/D converter110 dB dynamic rangeruns up to 5 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifeaccess to the battery compartment makes it easy for professional maintenance and testing on the battery as needed, giving you increased lifespandurable ABS composite housingUSB Type-Cincl. charging and storage case for XVIVE A58 Guitar Wireless Systemstores and charges A58 transmitter and receiverUSB-C charging interface, compatible with most 5 V / 2 A chargers or power banks (not included)integrated 5000 mAh battery for up to two full chargescharging time charging case battery: ca. 4.5 hourscharging time A58 system: ca. 2.5 hoursoutput interface: USB-C 5 V / 470 mAsmart charge detection and auto-shutoff to protect battery health and lifespanmade from durable ABS and 1680D fabricblackweight: 450 g / 1 lbs (incl. charging case, A58 transmitter and receiver)Note: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

The Xvive BCA58 Charging Case is specially designed for the A58 Guitar Wireless System. It’s an all-in-one solution that integrates storage, charging, and portability, tailored for performers and musicians. With its three core functions - secure storage, fast charging, and extended battery life - it’s the ideal companion for your A58 system, whether on stage, in the studio, or on the go. Equipped with a high-capacity internal battery, the BCA58 allows multiple full or partial recharges for both the A58 transmitter and receiver. The custom-molded interior ensures your gear stays secure and protected in transit, making it a reliable power and storage solution for live gigs, rehearsals, and travel.charging and storage case for XVIVE A58 Guitar Wireless Systemstores and charges A58 transmitter and receiverUSB-C charging interface, compatible with most 5 V / 2 A chargers or power banks (not included)integrated 5000 mAh battery for up to two full chargescharging time charging case battery: ca. 4.5 hourscharging time A58 system: ca. 2.5 hoursoutput interface: USB-C 5 V / 470 mAsmart charge detection and auto-shutoff to protect battery health and lifespanmade from durable ABS and 1680D fabricblackweight: 270 g / 0.6 lbs (without A58 transmitter or receiver)Note: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

The Xvive H3 is a transmitter holder specially designed for the Xvive A58 guitar wireless system. It allows you to securely fasten the transmitter to your guitar strap, keeping it away from the instrument’s output jack to avoid interference from active electronics. This setup helps reduce high-frequency noise commonly caused by active circuits in electric guitars or basses. For acoustic guitars with integrated microphone pickup systems, the H3 also helps to eliminate wireless signal interference issues. Constructed from durable leather and equipped with a secure hook+loop strap, the H3 ensures that your transmitter stays firmly in place during performances. It includes a standard 1/4-inch extension cable to easily connect the transmitter to your instrument’s output jack. Whether your guitar or bass has a recessed or unusually placed output jack, the H3 adapts with ease. Its compact, lightweight design makes it ideal for both stage use and daily practice.transmitter holder for XVIVE A58 or P58 Wireless Guitar Systemsattaches to a guitar strap, distancing the transmitter from the instrument’s electronicsincluded extension cable connects the transmitter to the output jackprevents interference from active electronicseliminates wireless signal interference with acoustic guitars equipped with integrated microphone pickup systemsprotects the transmitter in a durable leather holster with hook-and-loop fastenerincludes 1/4" female to 1/4" male adapter cable

In order to offer customers more wireless frequency options, Xvive has developed a wireless system that uses the 5.8 GHz band: the A58 Guitar Wireless System. The 5.8 GHz is a less crowded frequency, so it’s less likely to encounter signal interference; the 2.4 GHz frequency, meanwhile, performs better than 5.8 GHz when there are obstacles between the transmitter and the receiver. The A58 System has been fine-tuned for improved performance and guitar tone.digital wireless system for guitars, basses and other instruments6 switchable channels allow parallel use of 6 systemsscans for wireless status and selects the best channelcompatible with active and passive pickupsbuilt-in rechargeable 780 mAh lithium batteryrange up to 30 m / 100 ft. (without obstacles)< 5 ms latencyfrequency range 20 - 20,000 Hz5.8 GHz ISM band for worldwide use24 bit / 48 kHz A/D converter110 dB dynamic rangeruns up to 5 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifeaccess to the battery compartment makes it easy for professional maintenance and testing on the battery as needed, giving you increased mileagedurable ABS composite housingUSB Type-C socketincl. carry case, USB charging cableNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

In order to offer customers more wireless frequency options, Xvive has developed a wireless system that uses the 5.8 GHz band: the A58 Guitar Wireless System. The 5.8 GHz is a less crowded frequency, so it’s less likely to encounter signal interference; the 2.4 GHz frequency, meanwhile, performs better than 5.8 GHz when there are obstacles between the transmitter and the receiver. The A58 System has been fine-tuned for improved performance and guitar tone.digital wireless system for guitars, basses and other instruments6 switchable channels allow parallel use of 6 systemsscans for wireless status and selects the best channelcompatible with active and passive pickupsbuilt-in rechargeable 780 mAh lithium batteryrange up to 30 m / 100 ft. (without obstacles)< 5 ms latencyfrequency range 20 - 20,000 Hz5.8 GHz ISM band for worldwide use24 bit / 48 kHz A/D converter110 dB dynamic rangeruns up to 5 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifeaccess to the battery compartment makes it easy for professional maintenance and testing on the battery as needed, giving you increased mileagedurable ABS composite housingUSB Type-C socketincl. carry case, USB charging cableNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

In order to offer customers more wireless frequency options, Xvive has developed a wireless system that uses the 5.8 GHz band: the A58 Guitar Wireless System. The 5.8 GHz is a less crowded frequency, so it’s less likely to encounter signal interference; the 2.4 GHz frequency, meanwhile, performs better than 5.8 GHz when there are obstacles between the transmitter and the receiver. The A58 System has been fine-tuned for improved performance and guitar tone.digital wireless system for guitars, basses and other instruments6 switchable channels allow parallel use of 6 systemsscans for wireless status and selects the best channelcompatible with active and passive pickupsbuilt-in rechargeable 780 mAh lithium batteryrange up to 30 m / 100 ft. (without obstacles)< 5 ms latencyfrequency range 20 - 20,000 Hz5.8 GHz ISM band for worldwide use24 bit / 48 kHz A/D converter110 dB dynamic rangeruns up to 5 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifeaccess to the battery compartment makes it easy for professional maintenance and testing on the battery as needed, giving you increased mileagedurable ABS composite housingUSB Type-C socketincl. carry case, USB charging cableNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

The Xvive A58 Guitar Wireless System offers guitarists improved wireless signal transmission using the 5.8 GHz band. Compared to the more congested 2.4 GHz band, the 5.8 GHz band is less susceptible to interference, minimizing signal loss. The A58 system has been specifically engineered for optimized performance and enhanced sound transmission to provide guitarists with a stable, high-quality wireless connection.digital wireless receiver of the XVIVE A58 wireless system for guitars, basses and other instruments6 switchable channels allow parallel use of 6 systemsscans for wireless status and selects the best channelfor connection to amplifier, mixer or other audio equipmentbuilt-in rechargeable 780 mAh lithium batteryrange up to 30 m / 100 ft. (without obstacles)< 5 ms latencyfrequency range 20 - 20,000 Hz5.8 GHz ISM band for worldwide use24 bit / 48 kHz D/A converter110 dB dynamic rangeruns up to 5 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifeaccess to the battery compartment makes it easy for professional maintenance and testing on the battery as needed, giving you increased mileagedurable ABS composite housingUSB Type-C socketNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

In order to offer customers more wireless frequency options, Xvive has developed a wireless system that uses the 5.8 GHz band: the A58 Guitar Wireless System. The 5.8 GHz is a less crowded frequency, so it’s less likely to encounter signal interference; the 2.4 GHz frequency, meanwhile, performs better than 5.8 GHz when there are obstacles between the transmitter and the receiver. The A58 System has been fine-tuned for improved performance and guitar tone.digital wireless transmitter of the XVIVE A58 wireless system for guitars, basses and other instruments6 switchable channels allow parallel use of 6 systemsscans for wireless status and selects the best channelcompatible with active and passive pickupsbuilt-in rechargeable 780 mAh lithium batteryrange up to 30 m / 100 ft. (without obstacles)< 5 ms latencyfrequency range 20 - 20,000 Hz5.8 GHz ISM band for worldwide use24 bit / 48 kHz A/D converter110 dB dynamic rangeruns up to 5 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel select switchstatus LEDs show selected channel and indicate battery lifeaccess to the battery compartment makes it easy for professional maintenance and testing on the battery as needed, giving you increased mileagedurable ABS composite housingUSB Type-C socketNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

With their U2, U3 and U4 systems, XVIVE has been the market leader for professional, compact and wireless solutions for transmitting audio signals between instruments, microphones and cameras and the corresponding back-end systems for many years. XVIVE wireless systems are equipped with custom-fit rechargeable lithium-polymer batteries, which are light and small to ensure optimum user comfort. As battery life can deteriorate after prolonged and frequent use, XVIVE now offers their customers a cost effective and sustainable way to replace the batteries themselves. The battery replacement kits for the XVIVE U2, U3, U3C and U4 Wireless Systems each contain a new, custom-fit lithium polymer battery for the transmitter and receiver of the respective system as well as all additional components that need to be replaced when changing the battery. No special tools are required for the replacement and video and text instructions are provided to enable users without specialist knowledge to carry out the battery replacement.Replacement lithium polymer battery for XVIVE U2 Wireless Systemfully tested custom XVIVE batteriesprecision control circuit to ensure charging safetyDIY package for easy battery replacement2 x lithium polymer batteries for transmitter and receiver1 x screwdriver 2 x outer plug sleeves for U2 for transmitter and receiver2 x double-sided adhesive tapetransmitter battery: 650 mAh, 3.7 V, 2.4 Whreceiver battery: 650 mAh, 3.7 V, 2.4 WhNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

With their U2, U3 and U4 systems, XVIVE has been the market leader for professional, compact and wireless solutions for transmitting audio signals between instruments, microphones and cameras and the corresponding back-end systems for many years. XVIVE wireless systems are equipped with custom-fit rechargeable lithium-polymer batteries, which are light and small to ensure optimum user comfort. As battery life can deteriorate after prolonged and frequent use, XVIVE now offers their customers a cost effective and sustainable way to replace the batteries themselves. The battery replacement kits for the XVIVE U2, U3, U3C and U4 Wireless Systems each contain a new, custom-fit lithium polymer battery for the transmitter and receiver of the respective system as well as all additional components that need to be replaced when changing the battery. No special tools are required for the replacement and video and text instructions are provided to enable users without specialist knowledge to carry out the battery replacement.Replacement lithium polymer battery for XVIVE U3 Wireless Systemfully tested custom XVIVE batteriesprecision control circuit to ensure charging safetyDIY package for easy battery replacement2 x lithium polymer batteries for transmitter and receiver1 x screwdriver 2 x antenna cover for U3 for transmitter and receiver2 x double-sided adhesive tapetransmitter battery: 860 mAh, 3.7 V, 3.18 Whreceiver battery: 860 mAh, 3.7 V, 3.18 WhNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

With their U2, U3 and U4 systems, XVIVE has been the market leader for professional, compact and wireless solutions for transmitting audio signals between instruments, microphones and cameras and the corresponding back-end systems for many years. XVIVE wireless systems are equipped with custom-fit rechargeable lithium-polymer batteries, which are light and small to ensure optimum user comfort. As battery life can deteriorate after prolonged and frequent use, XVIVE now offers their customers a cost effective and sustainable way to replace the batteries themselves. The battery replacement kits for the XVIVE U2, U3, U3C and U4 Wireless Systems each contain a new, custom-fit lithium polymer battery for the transmitter and receiver of the respective system as well as all additional components that need to be replaced when changing the battery. No special tools are required for the replacement and video and text instructions are provided to enable users without specialist knowledge to carry out the battery replacement.Replacement lithium polymer battery for XVIVE U3C Wireless Systemfully tested custom XVIVE batteriesprecision control circuit to ensure charging safetyDIY package for easy battery replacement2 x lithium polymer batteries for transmitter and receiver1 x screwdriver 2 x antenna cover for U3C for transmitter and receiver2 x double-sided adhesive tapetransmitter battery: 1000 mAh, 3.7 V, 3.7 Whreceiver battery: 860 mAh, 3.7 V, 3.18 WhNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

With their U2, U3 and U4 systems, XVIVE has been the market leader for professional, compact and wireless solutions for transmitting audio signals between instruments, microphones and cameras and the corresponding back-end systems for many years. XVIVE wireless systems are equipped with custom-fit rechargeable lithium-polymer batteries, which are light and small to ensure optimum user comfort. As battery life can deteriorate after prolonged and frequent use, XVIVE now offers their customers a cost effective and sustainable way to replace the batteries themselves. The battery replacement kits for the XVIVE U2, U3, U3C and U4 Wireless Systems each contain a new, custom-fit lithium polymer battery for the transmitter and receiver of the respective system as well as all additional components that need to be replaced when changing the battery. No special tools are required for the replacement and video and text instructions are provided to enable users without specialist knowledge to carry out the battery replacement.Replacement lithium polymer battery for XVIVE U4 Wireless Systemfully tested custom XVIVE batteriesprecision control circuit to ensure charging safetyDIY package for easy battery replacement2 x lithium polymer batteries for transmitter and receiver1 x screwdriver 1 x antenna cover for U4 transmitter2 x double-sided adhesive tapetransmitter battery: 860 mAh, 3.7 V, 2.4 Whreceiver battery: 1200 mAh, 3.7 V, 4.44 WhNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

The XVive Hard Travel Case offers your U2 Guitar Wireless System ideal protection. Whether for storage at home, in the rehearsal room or on the way to the next gig: the U2 Guitar Wireless System is always optimally protected from dirt and damage. All components of the XVive U2 Guitar Wireless System, including the charging cable, can be stored in the hard travel case for a perfect fit. The EVA hard case is shockproof, dustproof and waterproof.EVA hard travel case for the XVive U2 Guitar Wireless Systemcustom-fit inlays provide secure protection for the XVive U2 Guitar Wireless System including charging cablesecure fixation of all componentsshockproof, dustproof and waterproofmade of three-layer, extra-hard EVAhigh-density oxford cloth exteriorinterior zipper-sealed accessory compartmentdimensions (L x W x H): 116 x 136 x 70 mm / 4.57" x 5.35" x 2.76"weight: 203 g / 0.45 lbscolour: black