EarthQuaker Devices Afterneath Eurorack Module - Reverberator

The EarthQuaker Devices Afterneath Eurorack Module brings the Otherworldly sounds from the effects pedal world right into your modular synthesizer with an expanded feature set. The Afterneath module features one main audio input, one main audio output, an audio send and return for the Reflect feedback path, and nine controls. Four of the parameters are controllable via CV, and each has been equipped with a dedicated attenuverter to process the incoming CV. The Afterneath module has a completely analog dry signal path and a totally digital wet signal path. The module offers an extremely wide range of different, vast, expansive, and magical ambient reverbs and covers all possible effects from wild and cavernous reverb effects to atmospheric reverberations of short digital delays to scattered, rhythmic delays with bizarre characteristics. The controls for Length (decay length of the reverb), Dampen (tone), Reflect (depth, regeneration) and Mix (wet/dry mix) are well-known parameters for reverb effects and work very intuitively. The Diffuse knob smooths and diffuses the delay repeats. Sharper transients with more attack counterclockwise, more ambient, reverb-like and washy as you turn it clockwise. Drag separates the individual digital delay lines, clockwise positions will gather the delay lines close together for a more reverb-like effect. Turn the Drag counterclockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.

• reverb Eurorack module
• ambient, vast, expansive, and magical reverb sounds
• 9 selectable modes to change the way the Drag control functions (Unquantized, Unquantized with Slew, Unquantized Volt/Octave, Chromatic Scale, Minor Scale, Major Scale (Lydian), Pentatonic Scale, Octaves & Fifths, Octaves)
• controls for Input, Dampen, Reflect, Mix, Drag, Mode, Diffuse, Length, 4x CV Attenuverter (Drag, Mode, Diffuse, Length)
• status LED
• Skiff friendly - protrudes less than 1.25" (31.75 mm) behind the panel with the power header installed
• audio input capable of handling input signals ranging from instrument-level to modular-level, depending on the setting of the input knob
• 4x 3.5 mm mono jack CV Input (Drag, Mode, Diffuse, Length)
• 3.5 mm mono in / output jacks
• 3.5 mm mono jack Reflect Send and Reflect Return
• power supply via standard 10-pin Eurorack power connector with a marking to notate the negative pins
• current draw 95 mA from the +12V rail, 0 mA from both the -12V and +5V rails
• width 16 HP / max. depth 31.75 mm (1.25")