RockBoard MOD 4 & U2 Transmitter - 2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

The RockBoard Flat TRS cable is extra flat and space-saving. Designed to optimize pedalboard real estate, it features a slim rectangular body and extra thin angled plugs. Six different lengths are available for any challenge. This keeps every setup tidy and neat looking and guarantees a short, clean signal path and pristine signal quality.flat TRS cable with a rectangular profilefor connecting foot controllers and expression pedalscompact and super flat angled plugsflexible copper conductor 20 x 0.12 mmtwisted copper shielding 34 x 0.12 mmPE (polyethylene) signal insulationouter PVC insulationcapacity less than 10 pF/decimeterconductor resistance less than 10 mOhm/decimeterangled 6.3 mm TRS audio plugsoperating temperature: -15° C to +70° C (5° F to 158° F)outer dimensions cable (W x H): 7 x 3 mm (9/32” x 1/8”)outer dimensions plugs (W x H): 12.5 x 7.5 mm (31/64” x 19/64”)length 60 cm (23 5/8")black

The RockBoard RBO B 5.3 CINQUE C pedalboard offers space for approx. 15 to 25 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 15 to 25 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 820 mm / 32 9/32"depth 424 mm / 16 11/16"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 5.15 kg / 11.4 lbs.including flight caseweight flight case approx. 12.8 kg / 28.1 lbs.interior dimensions main compartment (W x D x H) 830 x 435 x 175 mm / 32 11/16" x 17 1/8" 6 7/8"interior dimensions accessory compartment (W x D x H) 85 x 435 x 125 mm / 3 3/8" x 17/1/8" x 4 15/16"exterior dimensions (W x D x H) 990 x 475 x 210 mm / 39" x 12 1/8" x 8 1/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard ISO Power Block 12 IEC is a multi-power supply for effects pedals with 12 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 12 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals12 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise4 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center4 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center4 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 12 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 195 x 88 x 35 mm (7 43/64" x 3 15/32" x 1 3/8")weight: 608 g / 1.34 lbs

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plates for Dunlop Cry Baby standard size wah pedals and the RockBoard Stage Tuner ST-02flat surface, universally usabledimensions (W x H): 98 x 34 mm / 3,86" x 1,34"mounting hole distance: 62 mm (rear), 80 mm (front) / 2 7/16" (rear), 3 5/32" (front)set of 2 pcs.safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes silicone adhesive pads for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The QuickMount system was developed to completely eliminate the need for cumbersome hook-and-loop tape that attract dust and dirt and is difficult to remove from pedals. The QuickMount fit precisely into the RockBoard Slot Grid on our pedalboards, enables the immediate and secure mounting of effect pedals. The QuickMount are attached to the back of the pedals using the original screws (or, if necessary, with the longer replacement screws provided) and can be removed cleanly without leaving any residue. The QuickMount mounting plate Type B1 was specifically designed for effects by FRIEDMAN, WAMPLER EQ, WAMPLER VelvetFuzz, WALRUS DeepSix, WALRUS JULIA V2, WALRUS 385 OD, WALRUS Jupiter V2 Pedals, MOOER GL 100, and many other similarly designed effects from other manufacturers. All RockBoard QuickMount pedal mounting plates with a flat surface feature a reusable silicone adhesive pad that adheres securely to any smooth surface without leaving residue, ensuring that pedals with different screw spacings can also be mounted reliably.QuickMount Pedal Mounting Plate for FRIEDMAN, WAMPLER EQ, WAMPLER VelvetFuzz, WALRUS DeepSix, WALRUS JULIA V2, WALRUS 385 OD, WALRUS Jupiter V2, MOOER GL 100 pedalsflat surface, universally usabledimensions (W x H): 72 x 125 mm / 2,83" x 4,92"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 10 cm / 3 15/16"

The Power Ace Current Doubler Y-Cable is a high quality vcurrent doubling adapter cable for effect pedals to combine two separate, isolated 5.5 x 2.1 mm power slots, e.g. 2 x 150 mA to 300 mA.high quality current double cable with super compact plugsfor combining current output of two isolated power slots (e.g. 2 x 150 mA to 1 x 300 mA)2 x straight 2.1 x 5.5 mm barrel plugs (black) wired in parallel to 1 x 2.1 x 5.5 mm barrel socket (white)cable length between plug & socket 20 cm / 7 7/8"plug dimensions (L x W x H) 20.5 x 11 x 8.5 mm / 13/16" x 7/16" x 5/16"

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. The RockBoard QuickMount Type E was specially developed for standard size Boss compact series effects pedals.QuickMount Pedal Mounting Plate for standard size Boss compact series effects pedalsmounting hole distance (W x D): 55 x 111 mm / 2 11/64" x 4 3/8"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket. Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.Mini MOD TRSmounting solution for RockBoard pedalboardsfits in the mounting hole for the RockBoard LED Light1 x 6.3mm (1/4") TRS jack to 2 x 6.3 mm (1/4") TRS jackno drill holes are necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm - 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 50 g / 0.11 lbsincl. mounting screws

The RockBoard Looper/Switcher Connector Cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular cable and extra thin angled and compact straight plugs, to keep your setup tidy and neat looking. We have optimized our popular Flat Patch Cables for use with looper/switchers or effects pedals with tightly spaced jacks.flat patch cables with rectangular profilecompact and super flat angled/straight plugsperfect for use with looper/switchers or effects pedals with tightly spaced jacksflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimeters6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° F / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16" (angled), 12.5 x 12.5 mm / 1/2" x 1/2" (straight)blacklength 40 cm / 15 3/4"

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 45 cm / 17 23/32"

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 20 cm / 7 7/8"

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals.QuickMount Pedal Mounting Plate for FRIEDMAN Overdrive Deluxe, WALRUS Descent pedalsflat surface, universally usabledimensions (W x H): 146 x 120,5 mm / 5,75" x 4,75"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.3 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 807 x 417 mm / 31 49/64" x 16 27/64"weight: 1570 g / 3.46 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards3 x 6,3 mm / ¼" TRS thru2 x XLR thru (male front / female back)1 x XLR thru (female front / male back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts, and TX wrench

The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most commonly available power cables, Rockboard Flat Power Cables do not use two parallel cable lines, but use the same design as instrument cables with a central wire surrounded by a shielding layer. This effectively prevents electrical interference into the audio signal.high quality power cable for effects pedalsextra compact angled plugs5.5 x 2.1 mm barrel plugstwisted copper shield for minimizing electrical interferenceplug dimensions (L x W x H) 20 x 11 x 10.5 mm / 13/16 x 7/16 x 5/16length 30 cm / 11 13/16"

The JHS Pedals 3 Series Delay lets you choose between rich and warm or clear and pristine echoes. The straightforward design is simple and easy to use while offering a huge range of options. The Delay gives you 80 ms to 800 ms of delay time, for everything from slapback to long ambient washes of pad-like echo. The Type toggle allows you to select between a clearer digital-voiced delay and darker analog-voiced delay. The Delay will give you classic bucket brigade runaway when you max out the Repeats knob when in the analog-voiced delay mode. Each 3 Series pedal is made by JHS Pedals in Kansas City, MO, using high-quality parts, quality control, and attention to every detail. Each pedal has three simple controls and one toggle that offer a wide range of sounds, perfect for beginners and professionals alike. The JHS Pedals 3 Series will inspire your playing and help you explore new sounds at a totally approachable price point.delay effects pedal from the JHS Pedals 3 Seriesintuitive controls offer a wide range of possible soundsadjustable delay time of 80 ms to 800 msranges from slapback to long ambient washesType toggle selects between two voicing modes (digital-voiced / analog-voiced)true bypasscontrols for Mix, Time, RepeatsType toggle switchbypass footswitchstatus LEDmetal housing6.3 mm mono in / output jackspower supply via optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 71 mAdimensions (L x W x H) 112 x 60 x 31 mm / 4.42" x 2.38" x 1.22"weight ca. 210 g / 0.46 lbs

The JHS Pedals 3 Series Compressor is a simple and powerful compressor that will give you everything from subtle tone smoothing to a super squashed sound. The Attack and Sustain knobs allow you to dial in the compression's overall feel and response to your playing, while the Volume knob enables you to set the overall volume at unity or boosted. The Bright toggle engages a brighter EQ so that your tone doesn't get lost in certain situations. Each 3 Series pedal is made by JHS Pedals in Kansas City, MO, using high-quality parts, quality control, and attention to every detail. Each pedal has three simple controls and one toggle that offer a wide range of sounds, perfect for beginners and professionals alike. The JHS Pedals 3 Series will inspire your playing and help you explore new sounds at a totally approachable price point.compressor effects pedal from the JHS Pedals 3 Seriesintuitive controls offer a wide range of possible soundsranges from subtle tone smoothing to super squashed soundsBright toggle engages a brighter EQ voicingtrue bypasscontrols for Volume, Attack, SustainBright toggle switchbypass footswitchstatus LEDmetal housing6.3 mm mono in / output jackspower supply via optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 8 mAdimensions (L x W x H) 112 x 60 x 31 mm / 4.42" x 2.38" x 1.22"weight ca. 210 g / 0.46 lbs

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 30 cm / 11 13/16"

Cable management for pedalboards, optimized for neat, quick routing and fixing of cable paths. Perfect for organizing flexible customization options on and under the pedalboard. The set includes 50 cable ties and 25 matching holders to securely hold the cable ties in place. The cable tie holders are equipped with proven 3M™ adhesive surfaces, which guarantees reliable adhesion.Intelligent cable management set50 x cable ties 2 x 150 mm, black25 x holders for cable ties 20 x 20 mm, black, self-adhesiveProven 3M™ adhesive pad on the cable tie holders for a secure and powerful hold

The Rockboard Frame 4 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard QUAD 4.1, 4.2, 4.3 and 4.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 4 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard QUAD 4.1, 4.2, 4.3 or 4.4 with the Frame 4 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 4 XL and re-install the screws. It's that easy.optional brace for RockBoard Quad 4.1, 4.2 & 4.3drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H) 323 x 52 x 21,4 - 73,5 mm / 12 23/32" x 2 3/64" x 27/32" - 2 57/64"ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard GOLD Series Flat Patch Cables lift our popular Flat Patch Cables onto a new level of quality. Designed to be extra flat and space-saving, they optimize pedalboard real-estate, featuring a slim rectangular body and extra thin angled plugs. Their contacts and plug housings are gold-plated. The Cables feature a double shielding of braided copper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. The Gold Series Flat Patch Cables guarantee best signal quality and keep your setup tidy and neat looking.high quality double shielded flat patch cables with rectangular profilecompact and super flat angled plugsgold-plated connectorsmetal plug housingsflexible copper conductor (20 x 0.12 mm / 36 AWG)braided copper shielding (4 x 16 x 0.12 mm / 36 AWG)additional aluminum foil shieldingPE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"black with gold-plated plug housingslength 5 cm / 1 31/32"

The RockBoard PedalSafe Pick Box is a helpful accessory for musicians that want to store everything in one place. No more lost guitar picks or other small important accessories! The Pick Box comes with a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.Pick Box for pedalboardsstore picks and other small accessories directly on your pedalboardincludes silicone adhesive padROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for EarthQuaker Devices, Electro Harmonix, Keeley Electronics, MXR, JHS Pedals, Darkglass Electronics and many other effects pedals with larger vertical housingsflat surface, universally usabledimensions (W x H): 94 x 124 mm / 3,70" x 4,88"mounting hole distance (W x D): 78 to 83 x 110 mm / 3 5/64" to 3 17/64" x 4 21/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard slot grid on our pedalboards and allows for instant secure mounting of your pedals. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. The RockBoard QuickMount Universal Pedal Mounting Plates include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue. The RockBoard QuickMount Type UV was developed as an universal solution for effects pedals with vertical design that do not fit on the standard QuickMount Plates due to individual dimensions or unusual screw holes.QuickMount Universal Pedal Mounting Plate for effects pedals with vertical designflat surface, universally usabledimensions (W x H): 48 x 96,5 mm / 1,89" x 3,80"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes silicone adhesive pads for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboardscompatible with XVive U2 guitar wireless system2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type A charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincl. two antennas, USB charging cable, mounting screws, and counter nuts

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench

The Power MOD ISO DC 1 is a multi-power supply for effect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 effects pedals simultaneously. Sophisticated filtering technology effectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected effects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the affected power slot is switched off, leaving the rest of the effects rig operational.multi-power supply for effects pedalsprovides transformer isolated and highly filtered power slotsfits in a MOD slot on RockBoard® pedalboardscompatible with most other pedalboardsdetachable front plate for mounting on top or underneath pedalboardsadvanced filter technology prevents high frequency noiseexternal mains transformer prevents low frequency interferenceinput polarity protectionindividual status LEDs and short circuit protection for all power slots2 x strain relief clamps for connected cablesinput power: 24 VDC / 1.5 Aoutputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mAincl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters(EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting effects pedals)dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)weight: 500 g / 1.1 lbs

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.cabinet simulation & DI patchbayIR-based speaker cabinet simulation6 integrated IRs selectablesupport of additional Custom IRs (max. 1024 pts.)integrated active DI boxheadphone amplifierfits MOD slots in RockBoard® pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboardsselectable MONO / STEREO inputselectable UN / BALANCED outputground lift switchcontrol for Phones Volume3 x 6.3 mm / ¼" TRS thru jacks1 x XLR DI Out1 x 6.3 mm / ¼" Parallel TS output1 x 3.5 mm / 1/8" stereo headphone output with adjustable volume1 x 6.3 mm / ¼" parallel IR/DI TS inputmicro USB connection for firmware updates and loading custom IRspower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw 300 mAbattery operation not supporteddimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 470 g / 1.04 lbs.incl. mounting screws, counter nuts, and TX wrench

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards3 x 6,3 mm / ¼" TRS thru2 x XLR thru (male front / female back)1 x XLR thru (female front / male back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts, and TX wrench

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards4 x 6,3 mm / ¼" TRS thru2 x 5-pin DIN MIDI thru1 x USB Type A thru1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 420 g / 0.93 lbsincl. mounting screws, counter nuts, and TX wrench

The RockBoard ISO Power Block V10 is a multi power supply fort effects pedalsthat offers 10 transformer isolated and highly filtered power slots - 8 x 9 volts (isolated) with a max. current output of 150 mA each, und 2 x 18 volts (isolated) with a max. current out put of 400 mA each - for separately powering a total of up to 10 effects pedals simultaneously without any noise. The advanced filtering technology used in each of the power slots prevents high frequency noise. Through individual short circuit protection for each slot, connected effects pedals are effectively protected in case of a short circuit. Individual LEDs indicate short circuits for each of the 9V outputs. In case of a short circuit, only the affected slot is being turned off, so undesturbed use of the rest of the effects pedals is guaranteed.multi-power supply for effects pedals10 transformer isolates and stabilized power slotsadvanced filter technology prevents high-frequency noiseexternal transformer prevents low-frequency interferencemax. total current output 2.000 mA8 x 9V power outputs @ 150 mA each, 2,1 x 5,5 mm barrel plug, polarity (-) center2 x 18V power outputs @ 400 mA each ), 2,1 x 5,5 mm barrel plug, polarity (-) center short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1 x power adapter 18V DC, 2A with exchangeable regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240 V AC, , 2,1 x 5,5 mm barrel plug, polarity (-) centerincl. 10 x RockBoard Flat Power Cable, 60 cm -for connecting effects pedalsincl. 1 x RockBoard Power Ace Voltage Doubler Y-Cable, 20 cm / 7 7/8" (blue) - for bridging 2 slots and doubling/combining the volt output incl. 1 x RockBoard Power Ace Current Doubler Y-Cable, 20 cm / 7 7/8" (white) - for bridging 2 slots and doubling/combining the current output dimensions (L x W x H) 123 x 70 x 26 mm / 4 13/16" x 2 3/14" x 1"weight 180 g / 0,4 lb.

The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including gig bagweight gig bag approx. 1.2 kg / 2.65 lbs.interior dimensions gig bag (L x W x D) 480 x 260 x 120 mm / 18 7/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard® PowerMODs are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system The combination of the compact, lightweight design, the powerful sound and the low-noise operation makes the RockBoard® PowerMODs an affordable and reliable pedalboard power amplifier for beginners, discerning musicians and experienced professionals.compact amplifier for pedalboardscan be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboardssolid-state design, class D amplifier circuitrypower (@1% THD): 118 W at 4 Ohm / 70 W at 8 Ohm3-band EQfront panel controls for Volume, Low, Mid, Highfront-mounted Cab-Sim switchfront-mounted Mute switchfront-mounted 6.35 mm (1/4") speaker outputfront-mounted 3.5 mm (1/8") headphone outputfront-mounted 3.5 mm (1/8") AUX IN input for external audio signalsfront-mounted balanced XLR DI output rear-mounted connection for included power supply adapter rear-mounted instrument input including 220 - 240 VAC power adapter, output 36 VDC, 4.16 Adimensions (L x W x H) 175 x 116 x 47 mm / 6.88" x 4.56" x 1.85"weight 1.2 kg / 2.65 lbs (including power supply)

The RockBoard RBO B 3.0 TRES C pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including flight caseweight flight case approx. 2.65 kg / 5.85 lbs.interior dimensions (W x D x H) 450 x 260 x 130 mm / 17 11/16" x 10 1/4" x 5 1/8"exterior dimensions (W x D x H) 485 x 320 x 170 mm / 19 1/8" x 12 10/16" x 6 11/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.