Stands Instrument Hooks

These wall mounted hangers are a streamlined, softer design that may visually appeal to thinner necks, unique stringed instruments, or any situation that calls for a woman’s touch. They are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!female hand shaped instrument wall hangerleft hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to install,including steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblack high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

These wall mounted hangers are a streamlined, softer design that may visually appeal to thinner necks, unique stringed instruments, or any situation that calls for a woman’s touch. They are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!female hand shaped instrument wall hangerright hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to install,including steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblack high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

These wall mounted hangers are a streamlined, softer design that may visually appeal to thinner necks, unique stringed instruments, or any situation that calls for a woman’s touch. They are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!female hand shaped instrument wall hangerleft hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblue high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

These wall mounted hangers are a streamlined, softer design that may visually appeal to thinner necks, unique stringed instruments, or any situation that calls for a woman’s touch. They are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!female hand shaped instrument wall hangerright hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblue high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

These wall mounted hangers are a streamlined, softer design that may visually appeal to thinner necks, unique stringed instruments, or any situation that calls for a woman’s touch. They are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!female hand shaped instrument wall hangerleft hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmpurple high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

These wall mounted hangers are a streamlined, softer design that may visually appeal to thinner necks, unique stringed instruments, or any situation that calls for a woman’s touch. They are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!female hand shaped instrument wall hangerright hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmpurple high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerleft hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblack high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerright hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on left side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblack high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerleft hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblue high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerright hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on left side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmblue high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerleft hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmred high gloss metallic finishnot recommended for instruments with nitro-cellulose finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerright hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on left side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmred high gloss metallic finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerleft hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on right side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmsilverhigh gloss metallic finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

The GuitarGrip hangers strike a bold presence on any wall these wall mounts are carefully constructed to ensure safety and accessibility of your instruments while adding substantially to your décor. Put your axe on display today!male hand shaped instrument wall hangerright hand modeloffers optimal support for instruments with symmetrical headstock or with higher heel on left side of headstockmanufactured from Polyresincushioned insert to protect the instrument neckpadded felt at the base to protect wall from damageeasy to installincluding steel mounting post and a decorative mounting disc for wall mountingswivels to adjust for most styles of headstockssuitable for instruments with a maximum neck width of 52 mmsilver high gloss metallic finishhandmade in USALegal Disclaimer:The manufacturer and distributor grant no warranty, neither expressed nor implied, exceeding their legal liabilities with respect to GuitarGrip products.The manufacturer and distributor are without exception not liable for damage to property or health due to improper use or installation.The scope of the intended use is completely and exhaustively defined by the included manual.The customer is solely responsible for the stability of any installation as well as the suitability of any GuitarGrip product for a particular purpose.The suitability of any GuitarGrip product for a specific instrument resides exclusively with the customer and liability by the manufacturer and distributor are explicitly precluded.

horizontal guitar wall hanger for electrical guitars and bassesfoam padding for extra instrument protectioneasy to assemble; screws includedeasy-to-use pin-lock systemvariable alignment for right-handed and left-handed models7 selectable positions for each orientationeasily convertible for use for left-handed instrumentsrugged, powder-coated metal construction blacknot recommended for instruments with nitro-cellulose finish

horizontal guitar wall hanger for classical or folk guitar or acoustic bassfoam padding for extra instrument protectioneasy to assemble; screws includedeasy-to-use pin-lock systemvariable alignment for right-handed and left-handed models7 selectable positions for each orientationeasily convertible for use for left-handed instrumentsrugged, powder-coated metal construction blacknot recommended for instruments with nitro-cellulose finish

horizontal wall hanger for ukulele foam padding for extra instrument protectioneasy to assemble; screws includedeasy-to-use pin-lock systemvariable alignment for right-handed and left-handed models7 selectable positions for each orientationeasily convertible for use for left-handed instrumentsrugged, powder-coated metal construction blacknot recommended for instruments with nitro-cellulose finish