Power Supplies and Power Power Supply Mounting Solutions

The Rockboard Frame 2 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard DUO 2.0, 2.1, 2.2 and 2.3. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 2 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard DUO 2.0, 2.1, 2.2 or 2.3 with the Frame 2 XL. Simply loosen the two mounting screws and replace the original brace with the Frame 2 XL and re-install the screws. It's that easy.optional brace for RockBoard DUO 2.0, 2.1, 2.2 & 2.3drop-in replacementallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H): 126,5 x 52 x 7,5 mm / 4 63/64" x 2 3/64" x 19/64"weight: 75 g / 0.17 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard Frame 3 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard TRES 3.0, 3.1, 3.2 and 3.3. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 3 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard TRES 3.0, 3.1, 3.2 or 3.3 with the Frame 3 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 3 XL and re-install the screws. It's that easy.optional brace for RockBoard TRES 3.0, 3.1, 3.2 & 3.3drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H): 222,5 x 52 x 21,5 - 56,3 mm / 8 49/64" x 2 3/64" x 27/32" - 2 7/32"weight: 140 g / 0.31 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard Frame 4 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard QUAD 4.1, 4.2, 4.3 and 4.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 4 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard QUAD 4.1, 4.2, 4.3 or 4.4 with the Frame 4 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 4 XL and re-install the screws. It's that easy.optional brace for RockBoard Quad 4.1, 4.2 & 4.3drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H) 323 x 52 x 21,4 - 73,5 mm / 12 23/32" x 2 3/64" x 27/32" - 2 57/64"ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard Frame 5 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard CINQUE 5.2, 5.3 and 5.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 5 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard CINQUE 5.2, 5.3 or 5.4 with the Frame 5 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 5 XL and re-install the screws. It's that easy.optional brace for RockBoard CINQUE 5.2, 5.3 & 5.4drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H): 416 x 52 x 21,4 - 86,3 mm / 16 3/8" x 2 3/64" x 27/32" - 3 25/64"weight: 400 g / 0.88 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard® Frame XL is an optional replacement brace for mounting even the biggest multi power supplies underneath your RockBoard® pedalboard Cinque 5.2, 5.3 and 5.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution the new Rockboard® series of pedalboards already offer an easy way to fix a multitude of available power supply units. However there are some, even larger power bricks that just won't fit. The solution for this problem is the Rockboard® Frame XL, which allows you to mount even larger and wider multi power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard® Cinque 5.2, 5.3 or 5.4 with the Frame XL and you can also combine it with the Rockboard® The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame XL and re-install the screws. It's that easy.optional brace for RockBoard Cinque 5.2, 5.3 & 5.4drop in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard® pedalboardmade of aluminumdimensions (L x W x H) 41,5 x 10 x 8,7 cm / 16 15/16 x 3 15/16 x 1 7/16ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The new RockBoard® The Tray is a universal power supply mounting solution for almost any multi power supply unit you can imagine. Its one-size-fits-all design can be mounted underneath any new RockBoard® pedalboard (except Duo 2.0, 2.1, 2.2, 2.3 & TRES 3.0). Due to the construction of the RockBoard's vertical support braces no holes have to be drilled into your pedalboard and it can easily be fixed with only one screw. Using the holes in the Tray's surface, you can either mount power supply units to it using screws or cable ties. Also because of its flat surface hook and loop tape or other adhesive tape can be used to fix your power supply to it.universal power supply mounting solutionfits all new RockBoard® pedalboards except DUO 2.0, 2.1, 2.2, 2.3 & TRES 3.0no drill holes necessarymanufactured from steelincl. 2 x RBO B THE TRAY RIVETdimensions (L x W) 241 x 122 mm / 9 1/2 x 4 13/16weight 210 g / 0.46 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

spare rivets for mounting of RockBoard The Trayre-usableblack5 pcs.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.0 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 431 x 227 mm / 16 31/32" x 8 15/16"weight: 463 g / 1.07 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.1 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 509 x 227 mm / 20 3/64" x 8 15/16"weight: 530 g / 1.17 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.2 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 586 x 227 mm / 23 5/64" x 8 15/16"weight: 620 g / 1.37 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.3 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 705 x 227 mm / 27 3/4" x 8 15/16"weight: 714 g / 1.57 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.1 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 458 x 327 mm / 18 1/32" x 12 3/4"weight: 750 g / 1.65 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.2 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 605 x 324 mm / 23 13/16" x 12 3/4"weight: 890 g / 1.96 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.3 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 813 x 324 mm / 32 1/64" x 12 3/4"weight: 1170 g / 2.58 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.4 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 706 x 323 mm / 27 51/64" x 12 23/32"weight: 932 g / 2.05 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.2 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 605 x 416 mm / 23 13/16" x 16 3/8"weight: 1076 g / 2.37 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.3 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 807 x 417 mm / 31 49/64" x 16 27/64"weight: 1570 g / 3.46 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.3 MAX pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 794 x 488 mm / 31 17/64" x 19 7/32"weight: 1850 g / 4.08 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.4 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 985 x 416 mm / 38 25/32" x 16 3/8"weight: 1790 g / 3.95 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

Replacement locking latches for mounting RockBoard Base Platesreplacement locking latches for mounting RockBoard Base Platesreusable2 setsblackROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.