Power Supplies and Power Power Adapter Cable

The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most commonly available power cables, Rockboard Flat Power Cables do not use two parallel cable lines, but use the same design as instrument cables with a central wire surrounded by a shielding layer. This effectively prevents electrical interference into the audio signal.high quality polarity reverser power cable for effects pedalsextra compact angled/straight plugsdesigned like instrument cables with twisted copper shield for minimizing electrical interferencechanges polarity from negative to positive center5.5 x 2.1 mm barrel plugsplug dimensions angled (L x W x H) 20 x 9 x 10.5 mm / 13/16" x 6/16" x 5/16" plug dimensions straight(L x W x H) 20.5 x 11 x 8.5 mm / 13/16" x 7/16" x 5/16"length 30 cm / 11 13/16"

The POWER ACE NOI C eliminates ground-loop-based mains hum at the power supply input, providing a simple and reliable solution without compromising the protective earth connection. The unit is cleverly designed to plug directly between the IEC power cable and the power input of your amplifier or effects unit. It filters out the low-frequency voltage and current on the protective earth connector ground that are often responsible for ground-loop hum. Unlike a ground lift, the POWER ACE NOI C maintains a proper PE (Protection Earth) connection at all times. The POWER ACE NOI C has proven especially effective at dramatically reducing hum and noise with vintage-style tube amps. A handy blue LED indicator shows when the unit is powered and working.noise cleaner, hum & noise eliminator, 220 - 240 Veliminates ground-loop hum and noise directly at the power supply inputperfect for amplifiers, effects pedals, studio gear, live installations and much moresimple plug-and-play operation via standard IEC connectors, just connect between your IEC power cable and deviceinput voltage: 220 – 240 V / 50 – 60 Hzmaximum current: 6 Ablue power-on LED indicatorrugged designNote: Not a ground lift! Maintains proper PE (Protection Earth) connectionweight: 160 gr / 0.35 lbs.dimensions: 470 x 50 x 20 mm / 18.50“ x 1.97“ x 0.79“

power supply adapter cable for effect pedalsflat compact design2.1 mm x 5.5 mm barrel connector (female) to 3.5 mm / 1/8" mini plugfor effects pedals with 3.5 mm power supply jackchanges polarity from negative to positive center

power supply adapter cable for effect pedalsflat compact design2.1 mm x 5.5 mm female barrel connector to 9V battery clipfor effects pedals without power supply jack

power supply adapter cable for effect pedalsflat compact design2.1 x 5.5 mm female barrel connector to 2.5 x 5.5 mm barrel plugfor effects pedals with 2.5 x 5.5 mm power socket

Polarity reversal cable for effects pedals. The compact, straight plug-and-jack combination ensures maximum flexibility in tight pedalboard spaces. The cable construction, which meets instrument cable standards and features a braided copper shield, effectively minimizes electrical interference. The cable reliably reverses polarity at the pin and is ideal for the safe operation of compatible effects pedals.power supply adapter cable for effect pedalsflat compact design2.1 x 5.5 mm straight male barrel plug to 2.1 x 5.5 mm straight female barrel jackconverts polarity from center negative to center positive or vice versaNote: Before connecting, please check the polarity requirement of the pedal

The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most commonly available power cables, Rockboard Flat Power Cables do not use two parallel cable lines, but use the same design as instrument cables with a central wire surrounded by a shielding layer. This effectively prevents electrical interference into the audio signal.power supply adapter cable for effect pedalsflat compact design2.1 x 5.5 mm angled male barrel plug to 2.1 x 5.5 mm straight female barrel jackconverts polarity from center negative to center positive or vice versaNote: Before connecting, please check the polarity requirement of the pedal

The RockBoard Power Ace IEC Connector Cable provides you with the perfect extension cord from your RockBoard MOD to your multi power supply. Connect your IEC mains adapter cable to the front IEC port on your MOD. The Power Ace IEC Connector Cable then connects the back of the MOD with your multi power supply’s IEC socket without having a unnecessary long cable cable underneath your pedalboard. This way you won’t ever have to fiddle around underneath your board when setting your rig up on stage!IEC male to female connector cableconnects RockBoard MOD patchbays with multi-power supplies.length 35 cm / 13.78"

The angled Power Ace IEC Connector Cable provides you with the perfect extension cord from your RockBoard MOD to your multi power supply. Connect your IEC mains adapter cable to the front IEC port on your MOD. The Power Ace IEC Connector Cable then connects the back of the MOD with your multi power supply’s IEC socket without having a unnecessary long cable cable underneath your pedalboard. This way you won’t ever have to fiddle around underneath your board when setting your rig up on stage!IEC male to female angled connector cableconnects RockBoard MOD patchbays with multi-power supplies.length 35 cm / 13.78"

The POWER ACE MASTER adapter cable with ON/OFF switch is the ideal solution for conveniently supplying power to a pedalboard or rack setup. Thanks to the integrated switch, the entire setup can be turned on or off with just one click, without the hassle of unplugging or reconnecting cables under the board or behind the rack or studio equipment. Perfect for tidy wiring, quick access, and maximum reliability.IEC On/Off Master Switch Adapter Cablefor pedalboard power supplies, rack systems and studio equipmentmax 6A @ 250VAC, Max 12A @ 125VAClength: approx. 30 cm / 11.81“weight: approx. 90 g / 0.20 lbs.black

The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector. Please note: The Power Ace USB Series does not support USB-C Power Delivery (PD) ports. Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-A, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 30 cm / 11.81" weight 15 g / 0.5 oz

The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector. Please note: The Power Ace USB Series does not support USB-C Power Delivery (PD) ports. Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-A, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 60 cm / 23.60" weight 21 g / 0.7 oz

The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector. Please note: The Power Ace USB Series does not support USB-C Power Delivery (PD) ports. Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-C, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 30 cm / 11.81" weight 15 g / 0.5 oz

The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector. Please note: The Power Ace USB Series does not support USB-C Power Delivery (PD) ports. Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-C, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 60 cm / 23.60" weight 21 g / 0.7 oz

The Power Ace Current Doubler Y-Cable is a high quality vcurrent doubling adapter cable for effect pedals to combine two separate, isolated 5.5 x 2.1 mm power slots, e.g. 2 x 150 mA to 300 mA.high quality current double cable with super compact plugsfor combining current output of two isolated power slots (e.g. 2 x 150 mA to 1 x 300 mA)2 x straight 2.1 x 5.5 mm barrel plugs (black) wired in parallel to 1 x 2.1 x 5.5 mm barrel socket (white)cable length between plug & socket 20 cm / 7 7/8"plug dimensions (L x W x H) 20.5 x 11 x 8.5 mm / 13/16" x 7/16" x 5/16"

The Power Ace Voltage Doubler Y-Cable is a high quality voltage doubling adapter cable for effect pedals to combine two separate, isolated 5.5 x 2.1 mm power slots, e.g. 2 x 9 V to 18 V.high quality voltage double cable with super compact plugsfor combining voltage output of two isolated power slots (e.g. 2 x 9V to 1 x 18V)2 x straight 2.1 x 5.5 mm barrel plugs (black) wired in serial to 1 x 2.1 x 5.5 mm barrel socket (blue)cable length between plug & socket 20 cm / 7 7/8"plug dimensions (L x W x H) 20.5 x 11 x 8.5 mm / 13/16" x 7/16" x 5/16"

This handy little gadget can be used to convert any DC input voltage between 9 V and 15 V to a stable 18 V output voltage. Many analog boost / overdrive / distortion / fuzz pedals can be operated with up to 18 VDC to provide increased headroom. The intelligent circuitry of the POWER IVC 200 automatically detects the input voltage and converts it to 18 volts. It also provides short-circuit protection for the output. Due to its small size, you can stash the POWER IVC 200 under your pedalboard with hook-and-loop tape or cable ties.voltage converter / DC-DC boosterboosts 9-15V input to 18V outputcan be used with many analog OD/boost/distortion/fuzz pedals (check manufacturer’s specs)input 9-15 VDC, 300-500 mA, 2.1 x 5.5 mm barrel jack, polarity (-) centeroutput 18 VDC, 200 mA, 2.1 x 5.5 mm barrel plug, polarity (-) centerdimensions (L x W x H) 55 x 30 x 22 mm / 2.2” x 1.2” x 0.9”weight: 30 g / 1 oz.incl. 1 x power cable, 60 cm