Power Supplies and Power Multi Power Supplies & Mains Adapters

The Power MOD ISO DC 1 is a multi-power supply for effect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 effects pedals simultaneously. Sophisticated filtering technology effectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected effects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the affected power slot is switched off, leaving the rest of the effects rig operational.multi-power supply for effects pedalsprovides transformer isolated and highly filtered power slotsfits in a MOD slot on RockBoard® pedalboardscompatible with most other pedalboardsdetachable front plate for mounting on top or underneath pedalboardsadvanced filter technology prevents high frequency noiseexternal mains transformer prevents low frequency interferenceinput polarity protectionindividual status LEDs and short circuit protection for all power slots2 x strain relief clamps for connected cablesinput power: 24 VDC / 1.5 Aoutputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mAincl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters(EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting effects pedals)dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)weight: 500 g / 1.1 lbs

Power Supply for RBO B MOD ISO DC 1, RockBoard Power MOD ISO DC 1AC power adapter multi-power supply replacement adapter for the Rockboard Power MOD ISO DC 1 can be used in most regions of the world output 24 VDC, 1.5 A2.1 x 5.5 mm barrel plug, polarity (-) centerinput voltage 100 - 240 VACexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)ATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

The RockBoard ISO Power Block V6 is a multi-power supply for effects pedals with 5 isolated transformers and highly filtered 9V DC power slots and a single 18V DC link output to connect multiple ISO Power Blocks V6 in series for larger setups. The advanced filtering technology used in the 9V DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a short circuit. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the rest of your rig.multi-power supply for effects pedals5 transformer isolated and highly filtered and stabilized power slots18V DC link output to connect multiple ISO Power Blocks V6 in seriesdesigned for powering up to 5 effects pedals simultaneously without any noiseadvanced filter technology prevents high frequency noiseexternal transformer prevents low frequency interferencetotal output power: 22.5 W (2,500 mA)5x 9V DC, 500 mA each, 2.1 x 5.5 mm barrel plug, polarity (-) center1x 18V DC, 2000 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1x 18V DC power adapter (2,000 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 6x RockBoard Flat Power Cable, 60 cm (for connecting effects pedals)dimensions (L x W x H): 120 x 70 x 25 mm / 4 23/32" x 2 3/4" x 63/64"weight: 175 g / 0.38 lbs

The RockBoard ISO Power Block V6+ is a multi-power supply for effects pedals with 5 isolated transformers and highly filtered power slots (each slot is switchable for 9V / 12V / 15V / 18V) and a single 5V USB output. The RockBoard ISO Power Block V6+ was designed for powering up to 5 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a short circuit. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals5 transformer isolated and highly filtered and stabilized power slotsdesigned for powering up to 5 effects pedals simultaneously without any noiseadvanced filter technology prevents high frequency noiseexternal transformer prevents low frequency interference5x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center1x 5V USB-A output, 1000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1x 18V DC power adapter (2,000 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 5x RockBoard Flat Power Cable (for connecting effects pedals)dimensions (L x W x H): 120 x 70 x 26 mm / 4 23/32" x 2 3/4" x 1 1/32"weight: 195 g / 0.43 lbs

The RockBoard ISO Power Block V10 is a multi power supply fort effects pedalsthat offers 10 transformer isolated and highly filtered power slots - 8 x 9 volts (isolated) with a max. current output of 150 mA each, und 2 x 18 volts (isolated) with a max. current out put of 400 mA each - for separately powering a total of up to 10 effects pedals simultaneously without any noise. The advanced filtering technology used in each of the power slots prevents high frequency noise. Through individual short circuit protection for each slot, connected effects pedals are effectively protected in case of a short circuit. Individual LEDs indicate short circuits for each of the 9V outputs. In case of a short circuit, only the affected slot is being turned off, so undesturbed use of the rest of the effects pedals is guaranteed.multi-power supply for effects pedals10 transformer isolates and stabilized power slotsadvanced filter technology prevents high-frequency noiseexternal transformer prevents low-frequency interferencemax. total current output 2.000 mA8 x 9V power outputs @ 150 mA each, 2,1 x 5,5 mm barrel plug, polarity (-) center2 x 18V power outputs @ 400 mA each ), 2,1 x 5,5 mm barrel plug, polarity (-) center short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1 x power adapter 18V DC, 2A with exchangeable regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240 V AC, , 2,1 x 5,5 mm barrel plug, polarity (-) centerincl. 10 x RockBoard Flat Power Cable, 60 cm -for connecting effects pedalsincl. 1 x RockBoard Power Ace Voltage Doubler Y-Cable, 20 cm / 7 7/8" (blue) - for bridging 2 slots and doubling/combining the volt output incl. 1 x RockBoard Power Ace Current Doubler Y-Cable, 20 cm / 7 7/8" (white) - for bridging 2 slots and doubling/combining the current output dimensions (L x W x H) 123 x 70 x 26 mm / 4 13/16" x 2 3/14" x 1"weight 180 g / 0,4 lb.

The RockBoard ISO Power Block V16 is a multi-power supply for effects pedals with 16 isolated transformers and highly filtered power slots, designed for powering up to 15 effects pedals simultaneously without any noise and charging USB devices. The advanced filtering technology used in each of the power slots prevents high frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a short circuit. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the rest of your rig.multi-power supply for effects pedals16 transformer isolated and highly filtered and stabilized power slotsdesigned for powering up to 15 effects pedals simultaneously without any noise and charging USB devicesadvanced filter technology prevents high frequency noiseexternal transformer prevents low frequency interferencetotal output power: 27.95 W (3,550 mA)6x 9V DC, 100 mA each, 2.1 x 5.5 mm barrel plug, polarity (-) center5x 9V DC, 150 mA each, 2.1 x 5.5 mm barrel plug, polarity (-) center4x switchable slots (9V DC, 300 mA / 12V DC, 200 mA / 15V DC, 180 mA / 18V DC, 150 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center1x USB-A 5V, 1000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1x 18V DC power adapter (2,000 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 16x RockBoard Flat Power Cable, 60 cm - for connecting effects pedalsincl. 1x RockBoard Power Ace Voltage Doubler Y-Cable, 20 cm / 7 7/8" (blue) - for bridging 2 slots and doubling/combining the volt output incl. 1x RockBoard Power Ace Current Doubler Y-Cable, 20 cm / 7 7/8" (white) - for bridging 2 slots and doubling/combining the current output dimensions (L x W x H) 178 x 80 x 30 mm / 7 1/64" x 3 5/32" x 13/16"weight 400 g / 0.88 lbs

Power Adapter for RockBoard ISO V6, V6+, V10 & V16power adapter for RockBoard ISO V6, V6+, V10 & V1618V DC2000 mA2.1 x 5.5 mm barrel plugpolarity (-) center1.5 m (59") reinforced cableexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)input voltage 100-240V ACATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

The RockBoard Power Block is a compact multi-power supply for effects pedals and offers 10 power slots for the parallel power supply of up to 10 pedals. With a total of 1,200 mA for the eight 9V connections and a total of 800 mA for the two 18V connections, modern effects pedal setups can be easily supplied with power. The scope of delivery includes 10 connection cables and an 18V DC power supply (2,000 mA) with exchangeable multi-regional plug adapters.multi-power supply for effects pedals8x 9V DC power slots, grouped, max. 1,200 mA total combined, 2.1 x 5.5 mm barrel plug, polarity (-) center2x 18V DC power slots, grouped, max. 800 mA total combined, 2.1 x 5.5 mm barrel plug, polarity (-) center short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polaritymax. total current output of 2,000 mAinput voltage 18V DCincl. 10x RockBoard Flat Power Cable, 50 cm (for connecting effects pedals)incl. 1x 18V DC power adapter (2,000 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V ACdimensions (L x W x H): 112 x 60 x 22 mm / 4 13/32" x 2 23/64" x 55/64"weight: 150 g / 0.33 lbs

The RockBoard ISO Power Block 12 IEC is a multi-power supply for effects pedals with 12 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 12 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals12 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise4 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center4 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center4 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 12 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 195 x 88 x 35 mm (7 43/64" x 3 15/32" x 1 3/8")weight: 608 g / 1.34 lbs

The RockBoard ISO Power Block 6 IEC is a multi-power supply for effects pedals with 6 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 6 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals6 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise2 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 6 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 130 x 88 x 35 mm (5 1/8" x 3 15/32" x 1 3/8")weight: 386 g / 0.85 lbs

The RockBoard ISO Power Block 9 IEC is a multi-power supply for effects pedals with 9 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 9 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals9 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise3 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center3 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center3 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 9 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 195 x 88 x 35 mm (7 43/64" x 3 15/32" x 1 3/8")weight: 591 g / 1.30 lbs

The RBO POWER 9V DC provides a stable and consistent power supply and offers a reliable and robust design for many years of use on stage and in the studio. The power supply has been specially developed in Germany for use with high-quality effects pedals and meets all the requirements of a modern power supply for professional applications. High-quality coils in a separate housing guarantee an optimal and interference-free signal from the connected effect pedals, which is particularly important in studio operation. Thanks to the automatic voltage adjustment and the interchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), this power supply is perfectly suited for worldwide use. 9 W power supply for effects high quality constructionadvanced power supply adaptor for professional applicationshigh-quality interference suppression coils in separate housingvirtually hum-free operationindoor use only input: 100 - 240 VAC (automatic voltage adjustment) / 800 mAoutput: 9 VDC / 1000 mA / 9.0 W2.1 x 5.5 mm barrel connector (-) centerexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)cable length: 1.90 m / 74.80"weight: 220 g / 0.5 lbdimensions (L x W x H): 78 x 44 x 44 mm / 3.07" x 1.73" x 1.73" ATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

The RBO POWER 9V DC provides a stable and consistent power supply and offers a reliable and robust design for many years of use on stage and in the studio. The power supply has been specially developed in Germany for use with high-quality effects pedals and meets all the requirements of a modern power supply for professional applications. High-quality coils in a separate housing guarantee an optimal and interference-free signal from the connected effect pedals, which is particularly important in studio operation. Thanks to the automatic voltage adjustment and the interchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), this power supply is perfectly suited for worldwide use. 4,5 W power supply for effects high quality constructionadvanced power supply adaptor for professional applicationshigh-quality interference suppression coils in separate housingvirtually hum-free operationindoor use only input: 100 - 240 VAC (automatic voltage adjustment) / 800 mAoutput: 9 VDC / 500 mA / 4.5 W2.1 x 5.5 mm barrel connector (-) centerexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)cable length: 1.90 m / 74.80"weight: 220 g / 0.5 lbdimensions (L x W x H): 78 x 44 x 44 mm / 3.07" x 1.73" x 1.73" ATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

Power Supply for Effects9V DC1.700 mA outputinput voltage 100-240 volts (automatic voltage adjustment)high quality constructionvirtually hum-free operation1 m connection cable2.1 x 5.5 mm barrel connector (-) centerATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

The RockBoard Power Ace 25 is a high powered DC power adapter for feeding your power hungry effects pedals the current they need. Equipped with multi-regional plug adapters and a switching design it can be used virtually all around the globe. Its angled flat 2.1 x 5.5 mm barrel plug is mounted to a 3 meter long cable for extra reach. Power Ace 25 provides you with a whopping 2.5 mA of hum- and high frequency noise-free at 9V DC, center negative power. This is enough to supply even most those large digital multi-effects pedals with the juice they need.Power Supply for Effects9V DC output voltage2,500 mA output currentinput voltage 100-240 volts (automatic voltage adjustment)high quality constructionvirtually hum-free operation3 m connection cable2.1 x 5.5 mm barrel connector (-) centerATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

power supply for effect pedals9V DC1700 mA output2.1 x 5.5 mm barrel connector (-) center polarityfor up to 8 effect unitsinput voltage 100-240 volts (automatic voltage adjustment)high-quality constructionvirtually hum-free operation1 m / 3.3 ft power cable incl. 1 x Power supply base unit incl. 1 x Daisy Chain cable with 8 outputs (2.1 x 5.5 mm) barrel connector, incl. caps incl. 1 x 3.5 mm mini jack converter incl. 1 x 9V battery clip converter incl. 1 x 2.5 mm barrel plug converter (green)incl. 1 x 2.1 mm reverse polarity adapter (red)ATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.