RockBoard Power Supplies and Power

The Rockboard Frame 2 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard DUO 2.0, 2.1, 2.2 and 2.3. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 2 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard DUO 2.0, 2.1, 2.2 or 2.3 with the Frame 2 XL. Simply loosen the two mounting screws and replace the original brace with the Frame 2 XL and re-install the screws. It's that easy.optional brace for RockBoard DUO 2.0, 2.1, 2.2 & 2.3drop-in replacementallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H): 126,5 x 52 x 7,5 mm / 4 63/64" x 2 3/64" x 19/64"weight: 75 g / 0.17 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard Frame 3 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard TRES 3.0, 3.1, 3.2 and 3.3. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 3 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard TRES 3.0, 3.1, 3.2 or 3.3 with the Frame 3 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 3 XL and re-install the screws. It's that easy.optional brace for RockBoard TRES 3.0, 3.1, 3.2 & 3.3drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H): 222,5 x 52 x 21,5 - 56,3 mm / 8 49/64" x 2 3/64" x 27/32" - 2 7/32"weight: 140 g / 0.31 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard Frame 4 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard QUAD 4.1, 4.2, 4.3 and 4.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 4 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard QUAD 4.1, 4.2, 4.3 or 4.4 with the Frame 4 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 4 XL and re-install the screws. It's that easy.optional brace for RockBoard Quad 4.1, 4.2 & 4.3drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H) 323 x 52 x 21,4 - 73,5 mm / 12 23/32" x 2 3/64" x 27/32" - 2 57/64"ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard Frame 5 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard CINQUE 5.2, 5.3 and 5.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 5 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard CINQUE 5.2, 5.3 or 5.4 with the Frame 5 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 5 XL and re-install the screws. It's that easy.optional brace for RockBoard CINQUE 5.2, 5.3 & 5.4drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H): 416 x 52 x 21,4 - 86,3 mm / 16 3/8" x 2 3/64" x 27/32" - 3 25/64"weight: 400 g / 0.88 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Rockboard® Frame XL is an optional replacement brace for mounting even the biggest multi power supplies underneath your RockBoard® pedalboard Cinque 5.2, 5.3 and 5.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution the new Rockboard® series of pedalboards already offer an easy way to fix a multitude of available power supply units. However there are some, even larger power bricks that just won't fit. The solution for this problem is the Rockboard® Frame XL, which allows you to mount even larger and wider multi power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard® Cinque 5.2, 5.3 or 5.4 with the Frame XL and you can also combine it with the Rockboard® The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame XL and re-install the screws. It's that easy.optional brace for RockBoard Cinque 5.2, 5.3 & 5.4drop in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard® pedalboardmade of aluminumdimensions (L x W x H) 41,5 x 10 x 8,7 cm / 16 15/16 x 3 15/16 x 1 7/16ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Power MOD ISO DC 1 is a multi-power supply for effect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 effects pedals simultaneously. Sophisticated filtering technology effectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected effects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the affected power slot is switched off, leaving the rest of the effects rig operational.multi-power supply for effects pedalsprovides transformer isolated and highly filtered power slotsfits in a MOD slot on RockBoard® pedalboardscompatible with most other pedalboardsdetachable front plate for mounting on top or underneath pedalboardsadvanced filter technology prevents high frequency noiseexternal mains transformer prevents low frequency interferenceinput polarity protectionindividual status LEDs and short circuit protection for all power slots2 x strain relief clamps for connected cablesinput power: 24 VDC / 1.5 Aoutputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mAincl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters(EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting effects pedals)dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)weight: 500 g / 1.1 lbs

Power Supply for RBO B MOD ISO DC 1, RockBoard Power MOD ISO DC 1AC power adapter multi-power supply replacement adapter for the Rockboard Power MOD ISO DC 1 can be used in most regions of the world output 24 VDC, 1.5 A2.1 x 5.5 mm barrel plug, polarity (-) centerinput voltage 100 - 240 VACexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)ATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

The new RockBoard® The Tray is a universal power supply mounting solution for almost any multi power supply unit you can imagine. Its one-size-fits-all design can be mounted underneath any new RockBoard® pedalboard (except Duo 2.0, 2.1, 2.2, 2.3 & TRES 3.0). Due to the construction of the RockBoard's vertical support braces no holes have to be drilled into your pedalboard and it can easily be fixed with only one screw. Using the holes in the Tray's surface, you can either mount power supply units to it using screws or cable ties. Also because of its flat surface hook and loop tape or other adhesive tape can be used to fix your power supply to it.universal power supply mounting solutionfits all new RockBoard® pedalboards except DUO 2.0, 2.1, 2.2, 2.3 & TRES 3.0no drill holes necessarymanufactured from steelincl. 2 x RBO B THE TRAY RIVETdimensions (L x W) 241 x 122 mm / 9 1/2 x 4 13/16weight 210 g / 0.46 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

spare rivets for mounting of RockBoard The Trayre-usableblack5 pcs.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.0 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 431 x 227 mm / 16 31/32" x 8 15/16"weight: 463 g / 1.07 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.1 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 509 x 227 mm / 20 3/64" x 8 15/16"weight: 530 g / 1.17 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.2 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 586 x 227 mm / 23 5/64" x 8 15/16"weight: 620 g / 1.37 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard TRES 3.3 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 705 x 227 mm / 27 3/4" x 8 15/16"weight: 714 g / 1.57 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.1 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 458 x 327 mm / 18 1/32" x 12 3/4"weight: 750 g / 1.65 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.2 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 605 x 324 mm / 23 13/16" x 12 3/4"weight: 890 g / 1.96 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.3 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 813 x 324 mm / 32 1/64" x 12 3/4"weight: 1170 g / 2.58 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.4 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 706 x 323 mm / 27 51/64" x 12 23/32"weight: 932 g / 2.05 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.2 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 605 x 416 mm / 23 13/16" x 16 3/8"weight: 1076 g / 2.37 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.3 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 807 x 417 mm / 31 49/64" x 16 27/64"weight: 1570 g / 3.46 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.3 MAX pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 794 x 488 mm / 31 17/64" x 19 7/32"weight: 1850 g / 4.08 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard CINQUE 5.4 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 985 x 416 mm / 38 25/32" x 16 3/8"weight: 1790 g / 3.95 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

Replacement locking latches for mounting RockBoard Base Platesreplacement locking latches for mounting RockBoard Base Platesreusable2 setsblackROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most commonly available power cables, Rockboard Flat Power Cables do not use two parallel cable lines, but use the same design as instrument cables with a central wire surrounded by a shielding layer. This effectively prevents electrical interference into the audio signal.high quality power cable for effects pedalsextra compact angled plugs5.5 x 2.1 mm barrel plugstwisted copper shield for minimizing electrical interferenceplug dimensions (L x W x H) 20 x 11 x 10.5 mm / 13/16 x 7/16 x 5/16)length 15 cm / 5 29/32"

The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most commonly available power cables, Rockboard Flat Power Cables do not use two parallel cable lines, but use the same design as instrument cables with a central wire surrounded by a shielding layer. This effectively prevents electrical interference into the audio signal.high quality power cable for effects pedalsextra compact angled/straight plugs5.5 x 2.1 mm barrel plugstwisted copper shield for minimizing electrical interferenceplug dimensions (L x W x H) angled 20 x 11 x 10.5 mm / 13/16 x 7/16 x 5/16, straight 20.5 x 11 x 8.5 mm / 13/16 x 7/16 x 5/16length 15 cm / 5 29/32"