RockBoard Pedalboard Sets

The RockBoard RBO B 2.0 DUO B pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 3 to 5 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 318 mm / 12 33/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.5 kg / 1.1 lbs.including gig bagweight gig bag approx. 0.8 kg / 1.8 lbs.interior dimensions gig bag (L x W x D) 360 x 180 x 100 mm / 14 3/4" x 7 1/16" x 3 5/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 2.0 DUO C pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates (except the DUO series). All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 3 to 5 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 318 mm / 12.52"depth 142 mm / 5.59"height incl. rubber feet 35 - 58 mm / 1.38" - 2.28"weight 0.5 kg / 1.1 lbs.including caseweight case approx. 1.3 kg / 2.87 lbs.interior dimensions case (L x W x D) 331 x 167 x 111 mm / 13.03" x 6.58" x 4.37"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties Note: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage. ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 2.1 DUO B pedalboard offers space for approx. 4 to 7 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 4 to 7 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.7 kg / 1.6 lbs.including gig bagweight gig bag approx. 0.5 kg / 1.0 lbs.interior dimensions gig bag (L x W x D) 490 x 180 x 100 mm / 19 5/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 2.1 DUO C pedalboard offers space for approx. 4 to 7 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 4 to 7 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.7 kg / 1.6 lbs.including flight caseweight flight case approx. 1.8 kg / 4.0 lbs.interior dimensions (W x D x H) 480 x 165 x 120 mm / 18 7/8" x 6 1/2" x 4 3/4"exterior dimensions (W x D x H) 510 x 195 x145 mm / 20 1/16" x 7 11/16" x 5 11/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties Note: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage. ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 2.2 DUO B pedalboard offers space for approx. 5 to 9 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 9 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 142 mm / 5 9/16"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.9 kg / 2 lbs.including gig bagweight gig bag approx. 1.1 kg / 2.45 lbs.interior dimensions gig bag (L x W x D) 640 x 180 x 100 mm / 25 3/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 2.2 DUO C pedalboard offers space for approx. 5 to 9 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 9 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 142 mm / 5 9/16"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.9 kg / 2 lbs.including flight caseweight flight case approx. 2.65 kg / 5.85 lbs.interior dimensions (W x D x H) 630 x 170 x 120 mm / 24 13/16" x 6 11/16" x 4 3/4"exterior dimensions (W x D x H) 660 x 230 x 160 mm / 26" x 6 11/16" x 3 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 2.3 DUO B pedalboard offers space for approx. 7 to 11 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 11 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 1.0 kg / 2.2 lbs.including gig bagweight gig bag approx. 0.5 kg / 1.0 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 2.3 DUO C pedalboard offers space for approx. 7 to 11 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 11 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 1.0 kg / 2.2 lbs.including flight caseweight flight case approx. 3.0 kg / 6.61 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including gig bagweight gig bag approx. 1.2 kg / 2.65 lbs.interior dimensions gig bag (L x W x D) 480 x 260 x 120 mm / 18 7/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.0 TRES C pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including flight caseweight flight case approx. 2.65 kg / 5.85 lbs.interior dimensions (W x D x H) 450 x 260 x 130 mm / 17 11/16" x 10 1/4" x 5 1/8"exterior dimensions (W x D x H) 485 x 320 x 170 mm / 19 1/8" x 12 10/16" x 6 11/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.1 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 522 mm / 20 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.2 kg / 2.6 lbs.including gig bagweight gig bag approx. 1.25 kg / 2.8 lbs.interior dimensions gig bag (L x W x D) 550 x 290 x 120 mm / 24 5/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.1 TRES C pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 522 mm / 20 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.2 kg / 2.6 lbs.including flight caseweight flight case approx. 2.5 kg / 5.5 lbs.interior dimensions (W x D x H) 530 x 255 x 130 mm / 20 7/8" x 10 1/16" x 5 1/8"exterior dimensions (W x D x H) 560 x 285 x 160 mm / 22 1/16" x 11 1/4" x 6 5/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.2 TRES B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 598 mm / 23 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.3 kg / 2.9 lbs.including gig bagweight gig bag approx. 1.6 kg / 3.5 lbs.interior dimensions gig bag (L x W x D) 650 x 260 x 120 mm / 25 9/16" x 10 1/4" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.2 TRES C pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 598 mm / 23 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.3 kg / 2.9 lbs.including flight caseweight flight case approx. 2.5 kg / 5.5 lbs.interior dimensions (W x D x H) 615 x 260 x 110 mm / 24 3/16" x 10 1/4" x 4 5/16"exterior dimensions (W x D x H) 640 x 320 x 180 mm / 25 3/16" x 12 5/8" x 7 1/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.3 TRES B pedalboard offers space for approx. 9 to 14 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 14 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.0 kg / 2.2 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 3.3 TRES C pedalboard offers space for approx. 9 to 14 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 14 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 1.5 kg / 2.2 lbs.including flight caseweight flight case approx. 3.5 kg / 7.72 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.1 QUAD B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.5 kg / 3.3 lbs.interior dimensions gig bag (L x W x D) 505 x 370 x 130 mm / 19 7/8" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1 wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.1 QUAD C pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.5 kg / 3.3 lbs.including flight caseweight flight case approx. 4.5 kg / 9.9 lbs.interior dimensions (W x D x H) 480 x 345 x 165 mm / 18 7/8" x 13 9/16" x 6 1/2"exterior dimensions (W x D x H) 510 x 380 x 195 mm / 20 1/16" x 14 15/16" x 7 11/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.2 QUAD B pedalboard offers space for approx. 9 to 15 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 15 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 2.05 kg / 4.5 lbs.including gig bagapprox. weight bag 1,75 kg / 3.9 lbs.interior dimensions gig bag (L x W x D) 660 x 370 x 130 mm / 26" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.2 QUAD C pedalboard offers space for approx. 9 to 15 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 15 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 2.05 kg / 4.5 lbs.including flight caseweight flight case approx. 5.25 kg / 11.6 lbs.interior dimensions (W x D x H) 630 x 345 x 165 mm / 24 1/2" x 13 9/16" x 6 1/2"exterior dimensions (W x D x H) 660 x 380 x 195 mm / 26 x 14 15/16" x 7 11/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.3 QUAD B pedalboard offers space for approx. 10 to 20 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 10 to 20 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 828 mm / 32 19/32"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 2.4 kg / 5.3 lbs.including gig bagapprox. weight bag 2.7 kg / 6 lbs.interior dimensions gig bag (L x W x D) 880 x 370 x 130 mm / 34 10/16" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.3 QUAD C pedalboard offers space for approx. 10 to 20 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 10 to 20 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 828 mm / 32 19/32"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 2.4 kg / 5.3 lbs.including flight caseweight flight case approx. 7.1 kg / 15.65 lbs.interior dimensions (W x D x H) 835 x 340 x 165 mm / 32 7/8" x 13 3/8" x 6 1/2"exterior dimensions (W x D x H) 880 x 410 x 220 mm / 34 5/8" x 16 1/8" x 8 11/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.4 QUAD B pedalboard offers space for approx. 9 to 18 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 18 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 3.0 kg / 6.61 lbs.including gig bagweight gig bag approx. 1.0 kg / 2.2 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard RBO B 4.4 QUAD C pedalboard offers space for approx. 9 to 18 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, robust ball corners, sturdy latches, and a removable, padded lid offer all the requirements for safe and comfortable transport on the road. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 18 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 3.0 kg / 6.61 lbs.including flight caseweight flight case approx. 5.5 kg / 12.13 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.