RockBoard Electronic Gear

The RockBoard HA 1 In-Ear Monitoring Headphone Amplifier is the ideal partner for singers, keyboardists, drummers, guitarists, bassists and other musicians. It establishes the connection between the monitoring signal from the mixing console, instrument or amp and your own headphones. Operation is child's play: Simply activate the unit with the volume control and adjust the desired volume for the headphone signal. With the stereo/mono source switch, easily accessible on the unit, the RockBoard HA 1 can be adjusted to the respective input signal. The extremely compact and lightweight aluminium housing is equipped with a clip for fixing to a belt or waistband. The HA 1 has a status LED that changes colour depending on the available battery voltage. Two AAA batteries (not included) provide up to 12 hours of power, and changing the batteries is a very simple job thanks to the practical battery compartment with clip lock, which can be easily reached from the outside. The HA 1 is equipped with a combination jack for use with stereo jack (6.35 mm) and XLR cables for the input signal and a 3.5 mm stereo jack headphone output. On stage, in the rehearsal room or at home, the RockBoard HA 1 in-ear monitoring headphone amplifier always offers full control over the monitoring signal. In small clubs, in-ear monitoring improves the acoustics in the hall; when the band turns up the volume again, the signal is quickly adjusted and you can enjoy the same sound in every part of the room.headphone amplifier for in-ear monitoringideal for singers, keyboarder, drummers, guitarists, bassists and other musicianscompact and lightweight designpractical, externally accessible battery compartment with clip locksolid belt clip for fixing to belt or waistbandup to 12 hours battery run timeVolume/on-off controlStereo/mono source switch, easily accessiblestatus LEDaluminium housing1 x combo jack stereo (6.35 mm)/ XLR input1 x 3.5 mm stereo jack headphone outputmax. Output 2 x 110 mW at 16 Ohmimpedance <0.1 Ohmpower supply via 2 x AAA batteries (not included)dimensions (L x W x H) 141 x 30 x 36 mm / 5.55" x 1.18" x 1.42"weight 111 g / 0.24 lbs (including Batteries)

The RockBoard® HA 2 In-Ear Monitor Volume Controller allows the volume of the monitor signal sent from the mixing console to be quickly adjusted to the musician's actual needs without having to signal the sound engineer. The lightweight belt-pack unit is designed for performers who remain in a relatively fixed position on stage. It operates as a passive volume control and requires no batteries.cable-based in-ear monitor volume controller for vocalists, keyboarders, drummers, guitarists, bassists and other musiciansultra-compact, lightweight design; aluminum housing, metal belt clipstereo input and stereo output possibleMONO/STEREO switch to be able to send a mono input signal to both earsXLR / 6.35 mm (1/4") - TRS locking combo input jack features a locking mechanism that prevents accidental disconnection of the XLR cable3.5 mm (1/8“) stereo output jack for connecting your favorite in-ear-monitor, earphones or headphonespassive volume control - no batteries requiredconvenient belt pack format for easy access and reliable connection to sourceinput impedance: 1KΩoutput impedance 14Ω (when the VOLUME turns to MAX）dimensions (L x W x H) incl. clip, jack & knob: 30 x 33 x 86 mm (1.18" x 1.29" x 3.39")weight: 72 g (0.16 lbs)

The RockBoard® HA 3 In-Ear Monitor Amplifier is the core of a high-quality personal two-channel monitoring system for musicians. This lightweight unit is designed for performers who remain in a relatively fixed position on stage. It provides professional sound quality and a high-volume, high-fidelity signal allowing users to clearly hear a stereo or two separate monitor signals on any stage or in any studio. It can be used with a belt clip or mounted on a microphone stand using the integrated screw-on adapter. The HA 3 can be battery operated and features a status LED that changes color to indicate the remaining battery life. Changing batteries is very simple and quick thanks to the easy-access battery compartment. When mounted on a microphone stand, the HA3 can alternatively be powered by connecting a regular pedal power supply unit (not included) supplying center-negative 9 VDC. The HA 3 is equipped with two combination input jacks for use with 6.35 mm stereo TRS jacks or XLR connectors. Headphones or IEM are connected to a 3.5 mm stereo jack headphone output. Simply activate the unit with the ON/OFF switch and adjust the desired volume for the headphone signal. Use the stereo/mono source switch depending on your connected audio source(s) and use the balance control to adjust the stereo panorama for your headphones.cable-based two-channel in-ear monitor amplifier solution for vocalists, keyboarders, drummers, guitarists, bassists, and other musiciansultra-compact, lightweight design, aluminum housingconvenient belt pack format for easy access and reliable connection to sourcesturdy metal belt clip5/8" and 3/8" mounting adapters for alternative installation on a microphone standtwo separate input jacks for separate monitor signals or stereo signalsXLR/TRS-combo input jacks feature a locking mechanism that prevents accidental disconnection of the XLR cable3.5 mm (1/8") stereo output jack for connecting your favorite in-ear-monitor, earphones, or headphonesstereo input and stereo output possibleMONO/STEREO switch to be able to send a mono input signal to both earsvolume and Balance controlspowered by regular 9 VDC, center-negative pedal power supply (not included) or 9 V battery (not included)easy-access battery compartmentON/OFF switch to save battery life when not in useLED power indicatorinput impedance: 16KΩoutput impedance 12Ω (when the VOLUME turns to MAX）dimensions (L x W x H) incl. clip, jacks & knobs: 102 x 85 x 34 mm (4" x 3.4" x 1.3")weight: 295 g (10.5 oz) (without battery)

The RockBoard® HA 4 is a very compact headphone amplifier which can distribute a stereo input signal to four separate headphones. Each of the four output channels has its own amplifier and its own volume control and delivers professional quality audio to each headphone. Its robust and compact construction makes the HA4 the ideal choice for studio and live situations. Up to four people can listen to the main mix during recording sessions or up to four musicians can listen to a backing track at their preferred volume during practice sessions. Caution! This headphone amplifier can generate high sound pressure levels. Continued, unprotected exposure to these high sound pressure levels can cause permanent and irreversible hearing damage. If you notice hearing loss or ringing in your ears, consult a physician.compact headphone amplifier system for stage and studio applicationsfour separate high performance stereo amplifiersseparate volume control for each outputsuitable for all types of headphonestop sound quality at all volume levelshigh-quality components and robust construction with metal enclosure12V DC / 40 mA, 2.1 x 5.5 mm barrel plug, center negative, power supply includedinput : 1 x 6.35 mm (1/4") TRS jackoutput: 4 x 6.35 mm (1/4") stereo (TRS) jackSNR: 82 dBTHD: 0.009 %frequency response: +1 dB / -2 dB @20 Hz -22 KHzgain: 20 dBudimensions (L x W x H) incl. knobs and feet: 102 x 58 x 45 mm / 4.02” x 2.28” x 1.77”weight: 182 gr / 0.40 lbs

The RockBoard® LM 4 is a very compact four-channel line mixer capable of combining four mono line level input signals into one mono line level output. Each of the four input channels has its own amplifier and its own volume control and delivers professional low-noise audio quality. Its robust and compact design makes the LM 4 the ideal choice for studio and live situations. Ideal as a sub-mixer, for example for multiple keyboards, to avoid taking up valuable channels on the mixing console.compact four-channel line mixer for stage and studio applicationsfour separate high-performance amplifiersseparate volume control for each inputtop sound quality at all volume levelshigh-quality components and robust construction with metal enclosure12 VDC / 20 mA, 2.1 x 5.5 mm barrel plug, center negative, power supply includedinput : 4 x 6.35 mm (1/4") TS jackoutput: 1 x 6.35 mm (1/4") TS jackSNR: 95 dBTHD: 0.009 %frequency response: +1 dB / -2 dB @20 Hz -22 kHzdimensions (L x W x H) incl. knobs and feet: 102 x 58 x 45 mm / 4.02” x 2.28” x 1.77”weight: 182 gr / 0.40 lbs

The Rockboard Natural Sound Buffer is a op-amp based signal buffer that eliminates cable capacitance and loss of top end associated with long cable paths or using several unbuffered effects pedals. Its position in the signal chain shoul be assertained by experimentation depending on the effects pedals used to optimise your sound.op-amp based signal bufferprevents signal loss in effects chainsinput impedance: 2.2 Mohmsoutput impedance: 10 kohmsgives back presence and assertiveness to the overall soundSolid metal housing6.3 mm mono in/output jackspower supply via optional 9V DC Adapter, 2.1 x 5.5 mm barrel, polarity (-) centerbattery operation not supporteddimensions (W x D x H) 74 mm x 42 mm x 33 mmweight 92 g

With the Rockboard RPA100 Power Attenuator you can set your amp to your favorite sound - including high-gain and power amp distortion - and then reduce the volume on the speaker to acceptable levels for stage or rehearsal room without affecting the sound of the amp. This is particularly useful if you play a tube amp. The Rockboard RPA 100 Power Attenuator can be used to “tame” amplifiers with a power output of up to 100 watts. With a choice of 4, 8, and 16 ohm connections, your amp will always see the correct speaker impedance, regardless of the type of speakers actually connected to the attenuator. You can even use the amp without speakers and listen to the signal through headphones. In addition, the RPA 100 Power Attenuator gives you the option of routing the output from your power amp via DI OUT or LINE OUT to mixers or audio interface applications, or to practice with the amp’s original sound using the headphone output. For a more realistic sound, cab simulations (The bespoke cab sims, are inspired by a "V30/SM57" combination) can be applied to these additional outputs. For practice, you can mix in backing tracks or drum tracks from external audio devices via the AUX IN connection. power attenuator, dummy loadmax. input power 100 watts3 x separate inputs for 4/8/16 ohms1 x 3.5 mm / 1/8“ AUX input2 x 6.3 mm / 1/4“speaker output (parallel)1 x 6.3 mm / 1/4“ line output1 x 3.5 mm / 1/8“ headphones output1 x XLR-DI output1 x control for speaker level1 x control for line out level1 x switch for cab sim bypass1 x switch for cabinet simulation 2x12” & 4x12” (inspired by a "V30/SM57" combination)1 x 9V DC, 2.1 x 5.5 mm barrel plug, polarity (-) center, input voltage for operation of phones/DI/line outputsPower supply via optional 9V DC power supply unit, 2.1 x 5.5 mm barrel connector, polarity (-) center1 x fan1 x overload LEDdimensions (L x W x H) 180 x 160 x 125 mm / 7.09” x 6.30” x 4.92” (incl. feet & control knobs)weight 1545 g / 3.41 lbs.

The RockBoard StageTuner ST-01 combines all aspects that musicians seek in a chromatic pedal tuner. Its large, bright, but not blinding LED 28 segment display provides an easily readable interface even from meters away. The true bypass does not affect your guitar's tone at all and its two outputs allow for either silent or audible tuning. The ST-01's reference frequency can be changed in 1 Hz steps from 432 to 445 Hz with a tuning range from 27,5 Hz (A0) to 4.186 kHz (C8) accuratly down to 1 Cent. It also feature a handy detuning function, which lets you drop your tuning by 1, 2 or 3 semi-tones. All this, combined with the StageTuner ST-01's compact metal housing makes it the optimal companion you will not want to miss on your (RockBoard) pedalboard.pedal tuner for electric instrumentschromatictrue bypass28 segment (FND) & LED displayseparate output for audible tuningtuning range A0 (27,5 Hz) - C8 (4186 Hz)reference frequency 432 - 445 Hz (in 1 Hz steps)detuning function with 3 settings (b / bb / bbb)precision +/- 1 Centmetal housingpower supply via 9V battery (not included) or optional 9V DC power adapter (RockBoard Power Ace), polarity (-) center, 2.1 x 5.5 mm barrel plugcurrent draw max. 22 mAdimensions (W x L x H): 73 x 110 x 47 mm / 2 7/8" x 4 5/16" x 3 15/16"weight 300 g / 0.66 lbs. (incl. battery)

The RockBoard StageTuner ST-02 offers all the features that musicians want in a chromatic rack tuner. The large, bright, but not blinding LED display offers an easy-to-read surface that is clearly visible even from a distance of several meters. The true bypass doesn't affect the sound of the connected instrument and with two inputs (one on the front and one on the back), the StageTuner ST-02 can be flexibly integrated into any rack. The calibration range frequency of the ST-02 can be set in 1 Hz steps from 432 to 445 Hz and the large detection range from B-1 (15.44 Hz) to C8 (4,186.0 Hz) also covers extended range instruments or lower tunings easily. In addition to the standard mode, in which the arrows on the left and right in the display show the tuning direction, the StageTuner offers a strobe mode. Besides the standard installation in a 19" rack, the StageTuner can be mounted quickly and easily on a RockBoard pedalboard with the RockBoard QuickMounts TYPE M (available separately). All of this makes the StageTuner ST -02 a perfect choice for the stage, studios, rehearsal rooms and basically any other conceivable application.chromatic 19" rack tuner for electrical instrumentsdetection range: B-1 (15.44 Hz) - C8 (4,186.0 Hz), sine wavetwo selectable tuning modes (Standard, Strobe)precision: +/- 1 cent calibration range: 432 - 445 Hz (1 Hz steps)LED displayincl. rack-mount adapters for easy mounting in 19" racksM4 threaded sockets on the back of the tuner to attach RockBoard QuickMounts TYPE M (sold separately) for quick and easy mounting on RockBoard pedalboardstrue bypassinput: 2x 6.3 mm / 1/4" mono jacksoutput: 1x 6.3 mm / 1/4" mono jackpower supply via 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center (included in the delivery)current draw: max. 250 mA2x rack-mount adapter and 8x M4 screws for rack adapter or QuickMount (sold separately) included in the deliverydimensions (WxDxH): 395 x 63 x 44.45 mm / 15 35/64" x 2 31/64" x 1 3/4" (without rack-mount adapters)weight: 730 g / 1.6 lbs (without rack-mount adapters)

power adapter for RockBoard StageTuner ST-029V DC500 mA2.1 x 5.5 mm barrel plugpolarity (-) center1.5 m (59") reinforced cableexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)input voltage 100-240V ACATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.