RockBoard All-in-One Patchbays

The Power MOD ISO DC 1 is a multi-power supply for effect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 effects pedals simultaneously. Sophisticated filtering technology effectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected effects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the affected power slot is switched off, leaving the rest of the effects rig operational.multi-power supply for effects pedalsprovides transformer isolated and highly filtered power slotsfits in a MOD slot on RockBoard® pedalboardscompatible with most other pedalboardsdetachable front plate for mounting on top or underneath pedalboardsadvanced filter technology prevents high frequency noiseexternal mains transformer prevents low frequency interferenceinput polarity protectionindividual status LEDs and short circuit protection for all power slots2 x strain relief clamps for connected cablesinput power: 24 VDC / 1.5 Aoutputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mAincl. 1 x 24 VDC power adapter (1500 mA) with exchangeable multi-regional plug adapters(EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting effects pedals)dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)weight: 500 g / 1.1 lbs

Power Supply for RBO B MOD ISO DC 1, RockBoard Power MOD ISO DC 1AC power adapter multi-power supply replacement adapter for the Rockboard Power MOD ISO DC 1 can be used in most regions of the world output 24 VDC, 1.5 A2.1 x 5.5 mm barrel plug, polarity (-) centerinput voltage 100 - 240 VACexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)ATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

The RockBoard® MOD Rack will hold your MOD All-in-One Patchbays on non-RockBoard® pedalboards in place. It offers several mounting orientations, depending on the design of your pedalboard.optional mounting rack for RockBoard MOD All-in-One patchbays with V2 housingfor mounting RockBoard MOD V2s in non-RockBoard pedalboardsallows horizontal and vertical mounting of MOD V2s on/in pedalboards of other brandsmounting depth of MOD V2s adjustableomni-directionally usable depending on construction of the used pedalboardmounting height 35 mmincl. all mounting screws and counter nuts

spare mounting screws for RockBoard MOD patchbaysM3 x 10 mm threadsTX10 drive2 pcs.incl. counter nuts

Power Supply for RockBoard HA 4 headphone amplifier & LM 4 line mixermulti-regional AC power supply replacement adapter for the RockBoard HA 4 headphone amplifier & LM 4 line mixer input voltage 100 - 240 VACoutput 12 V DC, 500 mA2.1 x 5.5 mm barrel plug, polarity (-) centerexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)can be used in most regions of the world

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboards, incl. wireless transmitter2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type C charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincluding wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards4 x 6,3 mm / ¼" TRS thru2 x 5-pin DIN MIDI thru1 x USB Type A thru1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 420 g / 0.93 lbsincl. mounting screws, counter nuts, and TX wrench

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards3 x 6,3 mm / ¼" TRS thru2 x XLR thru (male front / female back)1 x XLR thru (female front / male back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts, and TX wrench

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboardscompatible with XVive U2 guitar wireless system2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type A charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincl. two antennas, USB charging cable, mounting screws, and counter nuts

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.cabinet simulation & DI patchbayIR-based speaker cabinet simulation6 integrated IRs selectablesupport of additional Custom IRs (max. 1024 pts.)integrated active DI boxheadphone amplifierfits MOD slots in RockBoard® pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboardsselectable MONO / STEREO inputselectable UN / BALANCED outputground lift switchcontrol for Phones Volume3 x 6.3 mm / ¼" TRS thru jacks1 x XLR DI Out1 x 6.3 mm / ¼" Parallel TS output1 x 3.5 mm / 1/8" stereo headphone output with adjustable volume1 x 6.3 mm / ¼" parallel IR/DI TS inputmicro USB connection for firmware updates and loading custom IRspower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw 300 mAbattery operation not supporteddimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 470 g / 1.04 lbs.incl. mounting screws, counter nuts, and TX wrench

The RockBoard MOD Brace is a simple solution for mounting heavier MOD Patchbays to your RockBoard pedalboard in a safe and secure fashion. The RockBoard MOD Brace is designed to provide additional support for your MOD by reinforcing the connection to your RockBoard pedalboard.metal brace for RockBoard MODssecures heavier RockBoard MODs on the RockBoard pedalboardmade of stainless steeldimensions (W x D x H): 179 x 17 x 48 mm / 7 1/16" x 11/16" x 1 7/8"mounting hole distance: 168 x 28 mm / 6 5/8" x 1 7/8"including mounting screws and wrench

19" rack panel with mounting slot for RockBoard MODscan be used to mount one RockBoard MOD V2 or one new MOD model (MOD 4, MOD 5, MOD 7) into standard 19" rackssteel panelpowder coated black surfaceheight: 1 Uwidth: 19"material thickness: 2.0 mm / 5/64"weight: 430 g / 0.95 lbsNote: Not compatible with RockBoard Pedalboard DrawerROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.rotating mounting drawer for RockBoard pedalboardsintelligent swivel locking mechanismfor accessories, cables, wireless systems, etc.fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3) material: reinforced polyamideincl. all mounting screws, counter nuts, and toolsdimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"weight: 150 g / 0.33 lbsblackNote: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MODROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

19" rack panel with two mounting slots for RockBoard MODscan be used to mount two RockBoard MOD V2 or two new MOD models (MOD 4, MOD 5, MOD 7) into standard 19" rackssteel panelpowder coated black surfaceheight: 1 Uwidth: 19"material thickness: 2.0 mm / 5/64"weight: 392 g / 0.86 lbsNote: Not compatible with RockBoard Pedalboard DrawerROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The RockBoard® PowerMODs are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system The combination of the compact, lightweight design, the powerful sound and the low-noise operation makes the RockBoard® PowerMODs an affordable and reliable pedalboard power amplifier for beginners, discerning musicians and experienced professionals.compact amplifier for pedalboardscan be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboardssolid-state design, class D amplifier circuitrypower (@1% THD): 50 W at 4 Ohm / 30 W at 8 Ohm3-band EQfront panel controls for Volume, Low, Mid, Highfront-mounted Cab-Sim switchfront-mounted Mute switchfront-mounted 6.35 mm (1/4") speaker outputfront-mounted 3.5 mm (1/8") headphone outputfront-mounted 3.5 mm (1/8") AUX IN input for external audio signalsfront-mounted balanced XLR DI output rear-mounted connection for included power supply adapter rear-mounted instrument input including 220 - 240 VAC power adapter, output 24 VDC, 2.25 Adimensions (L x W x H) 175 x 116 x 47 mm / 6.88" x 4.56" x 1.85"weight 0.84 kg / 1.86 lbs (including power supply)

The RockBoard® PowerMODs are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system The combination of the compact, lightweight design, the powerful sound and the low-noise operation makes the RockBoard® PowerMODs an affordable and reliable pedalboard power amplifier for beginners, discerning musicians and experienced professionals.compact amplifier for pedalboardscan be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboardssolid-state design, class D amplifier circuitrypower (@1% THD): 118 W at 4 Ohm / 70 W at 8 Ohm3-band EQfront panel controls for Volume, Low, Mid, Highfront-mounted Cab-Sim switchfront-mounted Mute switchfront-mounted 6.35 mm (1/4") speaker outputfront-mounted 3.5 mm (1/8") headphone outputfront-mounted 3.5 mm (1/8") AUX IN input for external audio signalsfront-mounted balanced XLR DI output rear-mounted connection for included power supply adapter rear-mounted instrument input including 220 - 240 VAC power adapter, output 36 VDC, 4.16 Adimensions (L x W x H) 175 x 116 x 47 mm / 6.88" x 4.56" x 1.85"weight 1.2 kg / 2.65 lbs (including power supply)

The Mini Mounting MOD DC provides convenient access to the setup‘s multi-power supply without the need for complicated routing of the power supply cable under the pedalboard. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. The central access to the power supply is provided by a DC 2.1 x 5.5 mm barrel thru jack. Since the Mini Mounting MOD DC uses through-connections between the inner and outer barrel jacks, it is also possible to supply power to external pedals, such as Wah, in the reverse direction. DC power supply cables or „daisy chain“ distributors can be used instead of a multi-power supply to distribute power to the pedals. (Outputs A and B are connected in parallel). Note: To avoid damage to the individual components, the total current consumption of all devices on the board should not exceed the output current of the connected multi-power supply or of the power adapter supplying the „daisy chain“ connections. Make sure that the voltage and polarity of the external power supply match the requirements of the multi-power supply/pedals.Mini MOD DCmounting solution for RockBoard pedalboards and power suppliesfits in the mounting hole for the RockBoard LED Light 1 x DC 2.1 x 5.5 mm barrel jack to 2 x DC 2.1 x 5.5 mm barrel jack, rated for a maximum of 3 A at 30 Vno drill holes necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm / 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 30 g / 0.07 lbsincl. mounting screws

The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket. Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.Mini MOD TRSmounting solution for RockBoard pedalboardsfits in the mounting hole for the RockBoard LED Light1 x 6.3mm (1/4") TRS jack to 2 x 6.3 mm (1/4") TRS jackno drill holes are necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm - 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 50 g / 0.11 lbsincl. mounting screws

The SLOT COVER offers an elegant solution for unused slots on your pedalboard and gives the pedalboard a professional and tidy appearance by concealing empty slots and creating a harmonious look. Made of high-quality material, the Slot Cover guarantees durability and resistance, even in demanding stage situations. Installation is child's play and requires no special tools.Slot cover for the RockBoard TRES, QUAD & CINQUE serieseasy installation in unused slots of the RockBoard pedalboardsDrilling templates for common plug sockets on the insideharmonious and tidy appearancepowder-coated steel, black surfaceincl. mounting screws and toolsDimensions (L x W): 179 x 55 mm / 7 3/64" x 2 11/64"Weight: approx. 90 g / 0.20 lb.