RockBoard QUAD 4.4, Pedalboard with Gig Bag

Single shipping

€169.00 Prices include VAT. plus shipping costs

€169.00

Prices include VAT. plus shipping costs

Variante

RBO B 4.4 QUAD B

RBO B 4.4 QUAD C

Delivery to Germany in 3 days (Item in stock)

Article-No.: RBO B 4.4 QUAD B

RockBoard QUAD 4.4, Pedalboard with Flight Case, RBO B 4.4 QUAD C

RBO B 4.4 QUAD C

RockBoard QUAD 4.4, Pedalboard with Gig Bag, RBO B 4.4 QUAD B

RBO B 4.4 QUAD B

RockBoard QUAD 4.4, Pedalboard with Gig Bag

The RockBoard RBO B 4.4 QUAD B pedalboard offers space for approx. 9 to 18 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.

pedalboard for effects pedals
for approx. 9 to 18 effects pedals (depending on size)
sturdy and light aluminum construction
slotted design for easy pedal mounting
mounting holes for RockBoard LED Light (not included) on both sides
made from cold-rolled aluminum sheet
additional U-shaped support brace for added rigidity
10 degrees angled and absolutely plain board surface - no weld seams
slots for RockBoard® MOD patch bays
robust black powder-coated surface
width 722 mm / 28 27/64"
depth 330 mm / 12 63/64"
height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"
weight 3.0 kg / 6.61 lbs.
including gig bag
weight gig bag approx. 1.0 kg / 2.2 lbs.
including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties

ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

Area Overview Bottom Side

RockBoard Pedalboard Size Comparisons

RockBoard PedalSafe and QuickMount Summary

PSU Matrix Boards

Login

E-Mail

Password

Lost password

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Password* Passwords must have a minimum length of 8 characters.

Your address

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Your address

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

No reviews found. Share your insights with others.

Manufacturer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de

Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de

General safety instructions
- Read the operating instructions carefully before using the pedalboard and keep them for future reference.
- Ensure that all connections are tight and secure to avoid malfunctions.

Warnings
- Ensure that the pedalboard is placed on a stable and level surface to prevent it from tipping over or falling.
- Keep the pedalboard away from children and pets to prevent injury and damage.
- Only use the supplied accessories or accessories recommended by the manufacturer to ensure optimum performance and safety

Accessories

RockBoard LED Light - Pedalboard Illumination

Variante: RBO B LED LIGHT

In a time of effects rigs with ever-growing visibility on stage is a major concern for many players. The RockBoard® LED Light will put a stop to groping in the dark once and for all. This LED light has been specifically designed for use with pedalboards. Immediately compatible with all 2019 Series RockBoard® Pedalboards its simple 3-hole mounting clamp can be fixed to virtually any pedalboard to illuminate your effects rig on dark stages. Adjustable in 4 steps and with 6 color settings it will either put your pedals in the limelight or provide subtle ambient illumination and everything in between.LED light for pedalboardsilluminates your effects rig on dark stagescompatible with most pedalboardsmulti-color LEDs6 colors selectable (white / red / green / blue / yellow / pink)brightness adjustable in 4-stepscurrent draw max. 500 mApower supply via optional 9V DC, 2.1 x 5.5 mm barrel plug, polarity (-) centerROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B LED LIGHT

€23.90 *

· Delivery time: 3 days

RockBoard Pedalboard LED Light V2 - Pedalboard Light

Variante: RBO B LED LIGHT V2

The RockBoard LED Light (V2) is a multi-colored LED lamp specially designed for use with the RockBoard Pedalboard series. The LED Light (V2) is quickly and easily attached to the RockBoard Pedalboard using a lockable mounting clamp. With 4 selectable brightness levels (100% / 75% / 50% / 25%) and 6 different colors (white / red / green / blue / yellow / pink), the brightness and mood can be perfectly adapted to the environment and personal needs. As a musician, you never grope in the dark again and the beloved pedalboard is perfectly illuminated!multi-colored LED lamp for RockBoard Pedalboardsquick and easy attachment with lockable mounting clampflexible adjustable light for the pedalboard16 powerful LEDs6 selectable colors (white / red / green / blue / yellow / pink)4 selectable brightness levels (100% / 75% / 50% / 25% / off)power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw max. 500 mAdimensions (W x H x D) 220 x 220 x 25 mm / 8 21/32" x 8 21/32" x 63/64"weight ca. 150 g / 0.33 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B LED LIGHT V2

€29.90 *

· Delivery time: 3 days

RockBoard Mini Mounting MOD DC

Variante: RBO B MOD MINI DC

The Mini Mounting MOD DC provides convenient access to the setup‘s multi-power supply without the need for complicated routing of the power supply cable under the pedalboard. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. The central access to the power supply is provided by a DC 2.1 x 5.5 mm barrel thru jack. Since the Mini Mounting MOD DC uses through-connections between the inner and outer barrel jacks, it is also possible to supply power to external pedals, such as Wah, in the reverse direction. DC power supply cables or „daisy chain“ distributors can be used instead of a multi-power supply to distribute power to the pedals. (Outputs A and B are connected in parallel). Note: To avoid damage to the individual components, the total current consumption of all devices on the board should not exceed the output current of the connected multi-power supply or of the power adapter supplying the „daisy chain“ connections. Make sure that the voltage and polarity of the external power supply match the requirements of the multi-power supply/pedals.Mini MOD DCmounting solution for RockBoard pedalboards and power suppliesfits in the mounting hole for the RockBoard LED Light 1 x DC 2.1 x 5.5 mm barrel jack to 2 x DC 2.1 x 5.5 mm barrel jackno drill holes necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm / 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 30 g / 0.07 lbsincl. mounting screws

RBO B MOD MINI DC

€14.90 *

· Delivery time: 3 days

RockBoard Mini Mounting MOD TRS

Variante: RBO B MOD MINI TRS

The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket. Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.Mini MOD TRSmounting solution for RockBoard pedalboardsfits in the mounting hole for the RockBoard LED Light1 x 6.3mm (1/4") TRS jack to 2 x 6.3 mm (1/4") TRS jackno drill holes are necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm - 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 50 g / 0.11 lbsincl. mounting screws

RBO B MOD MINI TRS

€14.90 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard MOD 2 V2 - All-in-One TRS, MIDI & USB Patchbay

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards4 x 6,3 mm / ¼" TRS thru2 x 5-pin DIN MIDI thru1 x USB Type A thru1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 420 g / 0.93 lbsincl. mounting screws, counter nuts, and TX wrench

RBO B MOD 2 V2

€64.90 *

· Delivery time: 3 days

RockBoard MOD 3 V2 - All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards3 x 6,3 mm / ¼" TRS thru2 x XLR thru (male front / female back)1 x XLR thru (female front / male back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts, and TX wrench

RBO B MOD 3 V2

€69.90 *

· Delivery time: 3 days

RockBoard MOD 4 - 2.4 GHz Guitar Wireless Receiver + TRS Patchbay

Variante: RBO B MOD 4

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboardscompatible with XVive U2 guitar wireless system2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type A charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincl. two antennas, USB charging cable, mounting screws, and counter nuts

RBO B MOD 4

€99.90 *

· Delivery time: 3 days

RockBoard MOD 4 & U2 Transmitter - 2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

Variante: RBO B MOD 4 U2

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboards, incl. wireless transmitter2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type C charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincluding wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

RBO B MOD 4 U2

€139.90 *

· Delivery time: 3 days

RockBoard MOD 5 - Cab SIM + DI Patchbay

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.cabinet simulation & DI patchbayIR-based speaker cabinet simulation6 integrated IRs selectablesupport of additional Custom IRs (max. 1024 pts.)integrated active DI boxheadphone amplifierfits MOD slots in RockBoard® pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboardsselectable MONO / STEREO inputselectable UN / BALANCED outputground lift switchcontrol for Phones Volume3 x 6.3 mm / ¼" TRS thru jacks1 x XLR DI Out1 x 6.3 mm / ¼" Parallel TS output1 x 3.5 mm / 1/8" stereo headphone output with adjustable volume1 x 6.3 mm / ¼" parallel IR/DI TS inputmicro USB connection for firmware updates and loading custom IRspower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw 300 mAbattery operation not supporteddimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 470 g / 1.04 lbs.incl. mounting screws, counter nuts, and TX wrench

RBO B MOD 5

€129.90 *

· Delivery time: 3 days

RockBoard Pedalboard Drawer - Rotating Drawer for RockBoard Pedalboards

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.rotating mounting drawer for RockBoard pedalboardsintelligent swivel locking mechanismfor accessories, cables, wireless systems, etc.fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3) material: reinforced polyamideincl. all mounting screws, counter nuts, and toolsdimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"weight: 150 g / 0.33 lbsblackNote: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MODROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B MOD DRAWER

€12.90 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 60 cm / 23 5/8"

Variante: RBO CAB PC F 60 BLK

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 60 cm / 23 5/8"

RBO CAB PC F 60 BLK

€5.90 *

· Delivery time: 1 week

RockBoard Mini Mounting MOD TRS

Variante: RBO B MOD MINI TRS

RBO B MOD MINI TRS

€14.90 *

· Delivery time: 3 days

RockBoard MOD 3 V2 - All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards3 x 6,3 mm / ¼" TRS thru2 x XLR thru (male front / female back)1 x XLR thru (female front / male back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts, and TX wrench

RBO B MOD 3 V2

€69.90 *

· Delivery time: 3 days

RockBoard Flat XLR Cable - 90 cm / 35 7/16"

Variante: RBO CAB F XLR 90 BK

Designed to optimize pedalboard real estate, the RockBoard Flat XLR Cables combine super flat XLR plugs and a space-saving rectangular cable profile. Of course the Flat XLR Cables can also be used on stage, as microphone cable, XLR patch cable or in any possible setup where a standard XLR cables is required. The special designed super flat XLR plugs fit through the slot grid on top of the RockBoard pedalboards and can be used on compact mixers, patchbays or anything else to save space and to keep the setup tidy and neat looking.flat XLR cable with rectangular profile and super compact XLR plugsXLR plugs fit through the slot grid on top of the RockBoard pedalboardsgold-plated XLR connectorsflat rectangular cable prevents cable preakage and jams2 flexible copper conductors 20 x 0.12 mm (36 AWG)twisted copper shielding 64 x 0.12 mm (36 AWG)PE (polyethylene) signal insulationplug dimensions (L x W x H): male: 40 x 24 x 18 mm / 1 9/16" x 15/16" x 11/16", female: 43 x 24 x 18 mm / 1 11/16" x 15/16" x 11/16"length: 90 cm / 35 7/16"

RBO CAB F XLR 90 BK

€14.50 *

· Delivery time: 3 days

RockBoard MOD 4 & U2 Transmitter - 2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

Variante: RBO B MOD 4 U2

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboards, incl. wireless transmitter2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type C charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincluding wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

RBO B MOD 4 U2

€139.90 *

· Delivery time: 3 days

RockBoard S-Connector - Nickel

Variante: RBO PC S NK

The RockBoard S-Connector is a super-compact pedal connector (jack coupler). The width of approx. 12 millimeters (1/2") makes your pedals come closer together. Using the 6.3 mm (1/4") S-Connector plug guarantees a short, clean signal path and pristine signal quality.straight pedal connector (jack coupler)short distance between two pedalsconnects side-mounted jacks6.3 mm mono audio plugs on both sideswidth approx. 12 mm (1/2)nickel

RBO PC S NK

€1.90 *

· Delivery time: 3 days

Rockboard Cable Set 50 CableTies & 25 CableTies Holder

Cable management for pedalboards, optimized for neat, quick routing and fixing of cable paths. Perfect for organizing flexible customization options on and under the pedalboard. The set includes 50 cable ties and 25 matching holders to securely hold the cable ties in place. The cable tie holders are equipped with proven 3M™ adhesive surfaces, which guarantees reliable adhesion.Intelligent cable management set50 x cable ties 2 x 150 mm, black25 x holders for cable ties 20 x 20 mm, black, self-adhesiveProven 3M™ adhesive pad on the cable tie holders for a secure and powerful hold

RBO CO SET 1

€3.90 *

· Delivery time: 3 days

RockBoard Frame 4 XL for QUAD 4.1, 4.2, 4.3 & 4.4

Variante: RBO B FRAME 4 XL

The Rockboard Frame 4 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard QUAD 4.1, 4.2, 4.3 and 4.4. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 4 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard QUAD 4.1, 4.2, 4.3 or 4.4 with the Frame 4 XL and you can also combine it with the Rockboard The Tray. Simply loosen the two mounting screws and replace the original brace with the Frame 4 XL and re-install the screws. It's that easy.optional brace for RockBoard Quad 4.1, 4.2 & 4.3drop-in replacementcombinable with RockBoard The Trayallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H) 323 x 52 x 21,4 - 73,5 mm / 12 23/32" x 2 3/64" x 27/32" - 2 57/64"ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B FRAME 4 XL

€25.90 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 IEC - Isolated Multi Power Supply

Variante: RBO POW ISO 6 IEC

The RockBoard ISO Power Block 6 IEC is a multi-power supply for effects pedals with 6 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 6 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals6 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise2 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 6 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 130 x 88 x 35 mm (5 1/8" x 3 15/32" x 1 3/8")weight: 386 g / 0.85 lbs

RBO POW ISO 6 IEC

€129.90 *

· Delivery time: 3 days

RockBoard Base Plate for QUAD 4.4 - Universal Mounting Solution

Variante: RBO BASE PLATE 4.4

The innovative Base Plate is a universal mounting solution, perfectly matched to the respective RockBoard® and provides a perfect extension of the board management for any application. The completely flat, powder-coated black surface, made of lightweight 2.0 mm cold-rolled aluminum and completely warp-resistant, provides an additional level. The construction of the vertical support braces gives the Base Plate additional stability. Using the holes in the slot design of the Base Plate´s surface, you can mount power supplies, effects, buffers, etc. by using our QuickMount® system, cable ties, or hook and loop tape. With a simple twist of the locking latches, the Base Plate can be opened in a flash. No additional drill holes are required for quick and easy mounting, the appropriate mounting materials are of course included.universal mounting solution and base plate for the RockBoard QUAD 4.4 pedalboardoffers clean cable routing, additional space and optimal protection for power supplies, effects, cables and moreeasy mounting, no additional drill holes requiredmade of aluminum (material thickness: 2.0 mm / 5/64")powder coated black surfaceincl. all mounting accessories and toolsdimensions (L x W): 706 x 323 mm / 27 51/64" x 12 23/32"weight: 932 g / 2.05 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO BASE PLATE 4.4

€90.90 *

· Delivery time: 3 days

RockBoard Mini Mounting MOD DC

Variante: RBO B MOD MINI DC

RBO B MOD MINI DC

€14.90 *

· Delivery time: 3 days

RockBoard QuickMount Pick Box

The RockBoard QuickMount Pick Box is a helpful accessory for musicians that want to store everything in one place. No more lost guitar picks or other small important accessories! Thanks to the QuickMount system you don't need sticky Velcro, just simply clip the Pick Box to the RockBoard pedalboard Slot Grid.Pick Box for RockBoard pedalboardsclips firmly and securely into the RockBoard Slot Gridstore picks and other small accessories directly on your pedalboardROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM AC PB

€8.40 *

· Delivery time: 3 days

RockBoard The Tray - Universal Power Supply Mounting Solution

The new RockBoard® The Tray is a universal power supply mounting solution for almost any multi power supply unit you can imagine. Its one-size-fits-all design can be mounted underneath any new RockBoard® pedalboard (except Duo 2.0, 2.1, 2.2, 2.3 & TRES 3.0). Due to the construction of the RockBoard's vertical support braces no holes have to be drilled into your pedalboard and it can easily be fixed with only one screw. Using the holes in the Tray's surface, you can either mount power supply units to it using screws or cable ties. Also because of its flat surface hook and loop tape or other adhesive tape can be used to fix your power supply to it.universal power supply mounting solutionfits all new RockBoard® pedalboards except DUO 2.0, 2.1, 2.2, 2.3 & TRES 3.0no drill holes necessarymanufactured from steelincl. 2 x RBO B THE TRAY RIVETdimensions (L x W) 241 x 122 mm / 9 1/2 x 4 13/16weight 210 g / 0.46 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B THE TRAY

€19.90 *

· Delivery time: 1 week

RockBoard QuickMount Cable Fix - Cable Clips (5 pcs.)

The RockBoard QuickMount Cable Fix was designed to keep your patch, signal and power cables together. This little cable clip helps to organize all possible cables underneath and on top of your pedalboard to make sure that your setup is clean and tidy.Cable Clips for RockBoard pedalboardsclips firmly and securely into the RockBoard Slot Gridhelps with the organization and routing of cables on the underside and surface of RockBoard pedalboardsset of 5 pcs.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM AC CF

€6.40 *

· Delivery time: 3 days

RockBoard Pedalboard Drawer - Rotating Drawer for RockBoard Pedalboards

RBO B MOD DRAWER

€12.90 *

· Delivery time: 3 days

RockBoard QUAD 4.4, Pedalboard with Flight Case

Variante: RBO B 4.4 QUAD C

The RockBoard RBO B 4.4 QUAD C pedalboard offers space for approx. 9 to 18 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, robust ball corners, sturdy latches, and a removable, padded lid offer all the requirements for safe and comfortable transport on the road. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 18 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 3.0 kg / 6.61 lbs.including flight caseweight flight case approx. 5.5 kg / 12.13 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 4.4 QUAD C

€309.00 *

· Delivery time: 3 days

Single shipping

RockBoard QUAD 4.3, Pedalboard with Gig Bag

Variante: RBO B 4.3 QUAD B

The RockBoard RBO B 4.3 QUAD B pedalboard offers space for approx. 10 to 20 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 10 to 20 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 828 mm / 32 19/32"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 2.4 kg / 5.3 lbs.including gig bagapprox. weight bag 2.7 kg / 6 lbs.interior dimensions gig bag (L x W x D) 880 x 370 x 130 mm / 34 10/16" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 4.3 QUAD B

€184.00 *

· Delivery time: 3 days

Single shipping

RockBoard QUAD 4.2, Pedalboard with Gig Bag

Variante: RBO B 4.2 QUAD B

The RockBoard RBO B 4.2 QUAD B pedalboard offers space for approx. 9 to 15 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 15 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 2.05 kg / 4.5 lbs.including gig bagapprox. weight bag 1,75 kg / 3.9 lbs.interior dimensions gig bag (L x W x D) 660 x 370 x 130 mm / 26" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 4.2 QUAD B

€149.00 *

· Delivery time: 1 week

Single shipping

RockBoard TRES 3.3, Pedalboard with Gig Bag

Variante: RBO B 3.3 TRES B

The RockBoard RBO B 3.3 TRES B pedalboard offers space for approx. 9 to 14 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 14 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.0 kg / 2.2 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.3 TRES B

€154.00 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard CINQUE 5.3, Pedalboard with Gig Bag

Variante: RBO B 5.3 CINQUE B

The RockBoard RBO B 5.3 CINQUE B pedalboard offers space for approx. 15 to 25 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 15 to 25 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 820 mm / 32 9/32"depth 424 mm / 16 11/16"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 5.15 kg / 11.4 lbs.including gig bagweight bag approx. 2.75 kg / 6.1 lbs.interior dimensions gig bag (L x W x D) 845 x 455 x 150 mm / 33 1/4" x 17 15/16" x 5 7/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 5.3 CINQUE B

€269.00 *

· Delivery time: 3 days

Single shipping

RockBoard Power MOD ISO DC 1

The Power MOD ISO DC 1 is a multi-power supply for eﬀect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 eﬀects pedals simultaneously. Sophisticated filtering technology eﬀectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected eﬀects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the aﬀected power slot is switched oﬀ, leaving the rest of the eﬀects rig operational.multi-power supply for eﬀects pedalsprovides transformer isolated and highly filtered power slotsfits in a MOD slot on RockBoard® pedalboardscompatible with most other pedalboardsdetachable front plate for mounting on top or underneath pedalboardsadvanced filter technology prevents high frequency noiseexternal mains transformer prevents low frequency interferenceinput polarity protectionindividual status LEDs and short circuit protection for all power slots2 x strain relief clamps for connected cablesinput power: 24 VDC / 1.5 Aoutputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mAincl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters(EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting eﬀects pedals)dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)weight: 500 g / 1.1 lbs

RBO B MOD ISO DC 1

€89.90 *

· Delivery time: 3 days

RockBoard TRES 3.2, Pedalboard with Flight Case

Variante: RBO B 3.2 TRES C

The RockBoard RBO B 3.2 TRES C pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 598 mm / 23 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.3 kg / 2.9 lbs.including flight caseweight flight case approx. 2.5 kg / 5.5 lbs.interior dimensions (W x D x H) 615 x 260 x 110 mm / 24 3/16" x 10 1/4" x 4 5/16"exterior dimensions (W x D x H) 640 x 320 x 180 mm / 25 3/16" x 12 5/8" x 7 1/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.2 TRES C

€194.00 *

· Delivery time: 3 days

RockBoard TRES 3.3, Pedalboard with Flight Case

Variante: RBO B 3.3 TRES C

The RockBoard RBO B 3.3 TRES C pedalboard offers space for approx. 9 to 14 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 14 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 1.5 kg / 2.2 lbs.including flight caseweight flight case approx. 3.5 kg / 7.72 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.3 TRES C

€234.00 *

· Delivery time: 3 days

RockBoard QUAD 4.1, Pedalboard with Gig Bag

Variante: RBO B 4.1 QUAD B

The RockBoard RBO B 4.1 QUAD B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.5 kg / 3.3 lbs.interior dimensions gig bag (L x W x D) 505 x 370 x 130 mm / 19 7/8" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1 wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 4.1 QUAD B

€125.00 *

· Delivery time: 3 days

Single shipping

RockBoard QUAD 4.4, Pedalboard with Flight Case

Variante: RBO B 4.4 QUAD C

RBO B 4.4 QUAD C

€309.00 *

· Delivery time: 3 days

Single shipping

RockBoard QUAD 4.3, Pedalboard with Gig Bag

Variante: RBO B 4.3 QUAD B

RBO B 4.3 QUAD B

€184.00 *

· Delivery time: 3 days

Single shipping

RockBoard QUAD 4.2, Pedalboard with Gig Bag

Variante: RBO B 4.2 QUAD B

RBO B 4.2 QUAD B

€149.00 *

· Delivery time: 1 week

Single shipping

RockBoard TRES 3.3, Pedalboard with Gig Bag

Variante: RBO B 3.3 TRES B

RBO B 3.3 TRES B

€154.00 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard CINQUE 5.3, Pedalboard with Gig Bag

Variante: RBO B 5.3 CINQUE B

RBO B 5.3 CINQUE B

€269.00 *

· Delivery time: 3 days

Single shipping

RockBoard Power MOD ISO DC 1

RBO B MOD ISO DC 1

€89.90 *

· Delivery time: 3 days

RockBoard TRES 3.2, Pedalboard with Flight Case

Variante: RBO B 3.2 TRES C

RBO B 3.2 TRES C

€194.00 *

· Delivery time: 3 days

RockBoard TRES 3.3, Pedalboard with Flight Case

Variante: RBO B 3.3 TRES C

RBO B 3.3 TRES C

€234.00 *

· Delivery time: 3 days

RockBoard QUAD 4.1, Pedalboard with Gig Bag

Variante: RBO B 4.1 QUAD B

RBO B 4.1 QUAD B

€125.00 *

· Delivery time: 3 days

Single shipping

Our 4 year extended warranty is available for RockBoard QUAD 4.4, Pedalboard with Gig Bag. Double your warranty period by registering your product.

RockBoard QUAD 4.4, Pedalboard with Gig Bag

RockBoard QUAD 4.4, Pedalboard with Gig Bag

Login

Get a 4-year guarantee