RockBoard DUO 2.3, Pedalboard with Gig Bag

€109.00 Prices include VAT. plus shipping costs

€109.00

Prices include VAT. plus shipping costs

Variante

RBO B 2.3 DUO B

RBO B 2.3 DUO C

Delivery to Germany in 3 days (Item in stock)

Article-No.: RBO B 2.3 DUO B

RockBoard DUO 2.3, Pedalboard with Gig Bag, RBO B 2.3 DUO B

RBO B 2.3 DUO B

RockBoard DUO 2.3, Pedalboard with Flight Case, RBO B 2.3 DUO C

RBO B 2.3 DUO C

RockBoard DUO 2.3, Pedalboard with Gig Bag

The RockBoard RBO B 2.3 DUO B pedalboard offers space for approx. 7 to 11 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.

pedalboard for effects pedals
for approx. 7 to 11 effects pedals (depending on size)
sturdy and light aluminum construction
slotted design for easy pedal mounting
mounting holes for RockBoard LED Light (not included) on the right side
made from cold-rolled aluminum sheet
additional U-shaped support brace for added rigidity
10 degrees angled and absolutely plain board surface - no weld seams
robust black powder-coated surface
width 722 mm / 28 27/64"
depth 142 mm / 5 19/32"
height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"
weight 1.0 kg / 2.2 lbs.
including gig bag
weight gig bag approx. 0.5 kg / 1.0 lbs.
including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties

ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

Area Overview Bottom Side

Schematic Drawing

RockBoard PedalSafe and QuickMount Summary

PSU Matrix Boards

RockBoard Pedalboard Size Comparisons

Login

E-Mail

Password

Lost password

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Password* Passwords must have a minimum length of 8 characters.

Your address

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Your address

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

No reviews found. Share your insights with others.

Manufacturer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de

Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de

General safety instructions
- Read the operating instructions carefully before using the pedalboard and keep them for future reference.
- Ensure that all connections are tight and secure to avoid malfunctions.

Warnings
- Ensure that the pedalboard is placed on a stable and level surface to prevent it from tipping over or falling.
- Keep the pedalboard away from children and pets to prevent injury and damage.
- Only use the supplied accessories or accessories recommended by the manufacturer to ensure optimum performance and safety

Accessories

RockBoard LED Light - Pedalboard Illumination

Variante: RBO B LED LIGHT

In a time of effects rigs with ever-growing visibility on stage is a major concern for many players. The RockBoard® LED Light will put a stop to groping in the dark once and for all. This LED light has been specifically designed for use with pedalboards. Immediately compatible with all 2019 Series RockBoard® Pedalboards its simple 3-hole mounting clamp can be fixed to virtually any pedalboard to illuminate your effects rig on dark stages. Adjustable in 4 steps and with 6 color settings it will either put your pedals in the limelight or provide subtle ambient illumination and everything in between.LED light for pedalboardsilluminates your effects rig on dark stagescompatible with most pedalboardsmulti-color LEDs6 colors selectable (white / red / green / blue / yellow / pink)brightness adjustable in 4-stepscurrent draw max. 500 mApower supply via optional 9V DC, 2.1 x 5.5 mm barrel plug, polarity (-) centerROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B LED LIGHT

€23.90 *

· Delivery time: 3 days

RockBoard Pedalboard LED Light V2 - Pedalboard Light

Variante: RBO B LED LIGHT V2

The RockBoard LED Light (V2) is a multi-colored LED lamp specially designed for use with the RockBoard Pedalboard series. The LED Light (V2) is quickly and easily attached to the RockBoard Pedalboard using a lockable mounting clamp. With 4 selectable brightness levels (100% / 75% / 50% / 25%) and 6 different colors (white / red / green / blue / yellow / pink), the brightness and mood can be perfectly adapted to the environment and personal needs. As a musician, you never grope in the dark again and the beloved pedalboard is perfectly illuminated!multi-colored LED lamp for RockBoard Pedalboardsquick and easy attachment with lockable mounting clampflexible adjustable light for the pedalboard16 powerful LEDs6 selectable colors (white / red / green / blue / yellow / pink)4 selectable brightness levels (100% / 75% / 50% / 25% / off)power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw max. 500 mAdimensions (W x H x D) 220 x 220 x 25 mm / 8 21/32" x 8 21/32" x 63/64"weight ca. 150 g / 0.33 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B LED LIGHT V2

€29.90 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 5 cm / 1 31/32"

Variante: RBO CAB PC F 5 BLK

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 5 cm / 1 31/32"

RBO CAB PC F 5 BLK

€3.60 *

· Delivery time: 3 days

RockBoard MOD 3 V2 - All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards3 x 6,3 mm / ¼" TRS thru2 x XLR thru (male front / female back)1 x XLR thru (female front / male back)1 x DC 2,1 x 5,5 mm barrel thru1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts, and TX wrench

RBO B MOD 3 V2

€69.90 *

· Delivery time: 3 days

Rockboard Cable Set 50 CableTies & 25 CableTies Holder

Cable management for pedalboards, optimized for neat, quick routing and fixing of cable paths. Perfect for organizing flexible customization options on and under the pedalboard. The set includes 50 cable ties and 25 matching holders to securely hold the cable ties in place. The cable tie holders are equipped with proven 3M™ adhesive surfaces, which guarantees reliable adhesion.Intelligent cable management set50 x cable ties 2 x 150 mm, black25 x holders for cable ties 20 x 20 mm, black, self-adhesiveProven 3M™ adhesive pad on the cable tie holders for a secure and powerful hold

RBO CO SET 1

€3.90 *

· Delivery time: 3 days

RockBoard QuickMount Type UV - Universal Pedal Mounting Plate For Vertical Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard slot grid on our pedalboards and allows for instant secure mounting of your pedals. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. The RockBoard QuickMount Universal Pedal Mounting Plates include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue. The RockBoard QuickMount Type UV was developed as an universal solution for effects pedals with vertical design that do not fit on the standard QuickMount Plates due to individual dimensions or unusual screw holes.QuickMount Universal Pedal Mounting Plate for effects pedals with vertical designflat surface, universally usabledimensions (W x H): 48 x 96,5 mm / 1,89" x 3,80"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes silicone adhesive pads for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T UV

€9.20 *

· Delivery time: 3 days

RockBoard QuickMount Type J2 - Pedal Mounting Plate for STRYMON NightSky, STRYMON Volante Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals.QuickMount Pedal Mounting Plate for STRYMON NightSky, STRYMON Volante pedalsflat surface, universally usabledimensions (W x H): 179 x 116,5 mm / 7,05" x 4,59"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T J2

€17.90 *

· Delivery time: 3 days

Rockboard Pedalboard Tape, 100 cm

3M™ Pedalboard Tape (Type 250) for securely mounting effect pedals to the pedalboard. Flexible organization of the pedals by simply cutting the tape to the desired size. Can be used like hook and loop tape, but the use of interlocking hooks eliminates the need for a counterpart and ensures a much stronger connection. The proven 3M™ adhesive technology ensures a secure and powerful hold for all pedal sizes.3M™ Pedalboard Tape (Type 250) for effect pedalsCan be used like hook and loop tapeno counterpart is required due to the use of interlocking hooksguarantees a much stronger connection than conventional hook and loop tapeproven 3M™ adhesive technology ensures a secure and firm hold for all pedal sizesself-adhesive can be cut to size 25 mm x 1 m

RBO CO SET 2

€14.90 *

· Delivery time: 3 days

RockBoard Mini Mounting MOD DC

Variante: RBO B MOD MINI DC

The Mini Mounting MOD DC provides convenient access to the setup‘s multi-power supply without the need for complicated routing of the power supply cable under the pedalboard. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. The central access to the power supply is provided by a DC 2.1 x 5.5 mm barrel thru jack. Since the Mini Mounting MOD DC uses through-connections between the inner and outer barrel jacks, it is also possible to supply power to external pedals, such as Wah, in the reverse direction. DC power supply cables or „daisy chain“ distributors can be used instead of a multi-power supply to distribute power to the pedals. (Outputs A and B are connected in parallel). Note: To avoid damage to the individual components, the total current consumption of all devices on the board should not exceed the output current of the connected multi-power supply or of the power adapter supplying the „daisy chain“ connections. Make sure that the voltage and polarity of the external power supply match the requirements of the multi-power supply/pedals.Mini MOD DCmounting solution for RockBoard pedalboards and power suppliesfits in the mounting hole for the RockBoard LED Light 1 x DC 2.1 x 5.5 mm barrel jack to 2 x DC 2.1 x 5.5 mm barrel jackno drill holes necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm / 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 30 g / 0.07 lbsincl. mounting screws

RBO B MOD MINI DC

€14.90 *

· Delivery time: 3 days

RockBoard QuickMount Type A - Pedal Mounting Plate For Standard Single Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for Electro Harmonix nano series and MXR standard size pedalsflat surface, universally usabledimensions (W x H): 61 x 112,5 mm / 2,40" x 4,43"mounting hole distance (W x D): 51 x 102 mm / 2 1/64" x 4 1/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T A

€11.20 *

· Delivery time: 3 days

RockBoard ISO Power Block V10 Multi Power Supply, Multi regional

Variante: RBO POW BLO ISO 10V2

The RockBoard ISO Power Block V10 is a multi power supply fort effects pedalsthat offers 10 transformer isolated and highly filtered power slots - 8 x 9 volts (isolated) with a max. current output of 150 mA each, und 2 x 18 volts (isolated) with a max. current out put of 400 mA each - for separately powering a total of up to 10 effects pedals simultaneously without any noise. The advanced filtering technology used in each of the power slots prevents high frequency noise. Through individual short circuit protection for each slot, connected effects pedals are effectively protected in case of a short circuit. Individual LEDs indicate short circuits for each of the 9V outputs. In case of a short circuit, only the affected slot is being turned off, so undesturbed use of the rest of the effects pedals is guaranteed.multi-power supply for effects pedals10 transformer isolates and stabilized power slotsadvanced filter technology prevents high-frequency noiseexternal transformer prevents low-frequency interferencemax. total current output 2.000 mA8 x 9V power outputs @ 150 mA each, 2,1 x 5,5 mm barrel plug, polarity (-) center2 x 18V power outputs @ 400 mA each ), 2,1 x 5,5 mm barrel plug, polarity (-) center short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1 x power adapter 18V DC, 2A with exchangeable regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240 V AC, , 2,1 x 5,5 mm barrel plug, polarity (-) centerincl. 10 x RockBoard Flat Power Cable, 60 cm -for connecting effects pedalsincl. 1 x RockBoard Power Ace Voltage Doubler Y-Cable, 20 cm / 7 7/8" (blue) - for bridging 2 slots and doubling/combining the volt output incl. 1 x RockBoard Power Ace Current Doubler Y-Cable, 20 cm / 7 7/8" (white) - for bridging 2 slots and doubling/combining the current output dimensions (L x W x H) 123 x 70 x 26 mm / 4 13/16" x 2 3/14" x 1"weight 180 g / 0,4 lb.

RBO POW BLO ISO 10V2

€114.90 *

· Delivery time: 3 days

RockBoard QuickMount Type L - Pedal Mounting Plate For Standard Mini Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for MXR, Pigtronix, TC Electronic, Xotic, XVive and many other effects pedals with mini-sized housingsflat surface, universally usabledimensions (W x H): 41 x 93 mm / 1,61" x 3,66"mounting hole distance (W x D): 29 x 72-82 mm / 1 9/64" x 2 53/64" to 3 15/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T L

€12.40 *

· Delivery time: 3 days

RockBoard MOD Brace

The RockBoard MOD Brace is a simple solution for mounting heavier MOD Patchbays to your RockBoard pedalboard in a safe and secure fashion. The RockBoard MOD Brace is designed to provide additional support for your MOD by reinforcing the connection to your RockBoard pedalboard.metal brace for RockBoard MODssecures heavier RockBoard MODs on the RockBoard pedalboardmade of stainless steeldimensions (W x D x H): 179 x 17 x 48 mm / 7 1/16" x 11/16" x 1 7/8"mounting hole distance: 168 x 28 mm / 6 5/8" x 1 7/8"including mounting screws and wrench

RBO B MOD BRACE

€24.90 *

· Delivery time: 3 days

RockBoard QuickMount Type J1- Pedal Mounting Plate for BOSS DD-500, BOSS MD-500, BOSS RC-500, BOSS RV-500, STRYMON BigSky, STRYMON Mobius, STRYMON TimeLine Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals.QuickMount Pedal Mounting Plate for BOSS DD-500, BOSS MD-500, BOSS RC-500, BOSS RV-500, STRYMON BigSky, STRYMON Mobius, STRYMON TimeLine pedalsflat surface, universally usabledimensions (W x H): 171 x 129 mm / 6,73" x 5,08"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T J1

€18.40 *

· Delivery time: 3 days

RockBoard DUO 2.2, Pedalboard with Gig Bag

Variante: RBO B 2.2 DUO B

The RockBoard RBO B 2.2 DUO B pedalboard offers space for approx. 5 to 9 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 9 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 142 mm / 5 9/16"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.9 kg / 2 lbs.including gig bagweight gig bag approx. 1.1 kg / 2.45 lbs.interior dimensions gig bag (L x W x D) 640 x 180 x 100 mm / 25 3/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.2 DUO B

€89.00 *

· Delivery time: 3 days

RockBoard TRES 3.0, Pedalboard with Gig Bag

Variante: RBO B 3.0 TRES B

The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including gig bagweight gig bag approx. 1.2 kg / 2.65 lbs.interior dimensions gig bag (L x W x D) 480 x 260 x 120 mm / 18 7/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.0 TRES B

€99.00 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Gig Bag

Variante: RBO B 2.0 DUO B

The RockBoard RBO B 2.0 DUO B pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 3 to 5 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 318 mm / 12 33/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.5 kg / 1.1 lbs.including gig bagweight gig bag approx. 0.8 kg / 1.8 lbs.interior dimensions gig bag (L x W x D) 360 x 180 x 100 mm / 14 3/4" x 7 1/16" x 3 5/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.0 DUO B

€59.00 *

· Delivery time: 3 days

RockBoard TRES 3.1, Pedalboard with Gig Bag

Variante: RBO B 3.1 TRES B

The RockBoard RBO B 3.1 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 522 mm / 20 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.2 kg / 2.6 lbs.including gig bagweight gig bag approx. 1.25 kg / 2.8 lbs.interior dimensions gig bag (L x W x D) 550 x 290 x 120 mm / 24 5/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.1 TRES B

€109.00 *

· Delivery time: 3 days

RockBoard DUO 2.1, Pedalboard with Gig Bag

Variante: RBO B 2.1 DUO B

The RockBoard RBO B 2.1 DUO B pedalboard offers space for approx. 4 to 7 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 4 to 7 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.7 kg / 1.6 lbs.including gig bagweight gig bag approx. 0.5 kg / 1.0 lbs.interior dimensions gig bag (L x W x D) 490 x 180 x 100 mm / 19 5/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.1 DUO B

€74.00 *

· Delivery time: 3 days

RockBoard DUO 2.3, Pedalboard with Flight Case

Variante: RBO B 2.3 DUO C

The RockBoard RBO B 2.3 DUO C pedalboard offers space for approx. 7 to 11 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 11 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 1.0 kg / 2.2 lbs.including flight caseweight flight case approx. 3.0 kg / 6.61 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.3 DUO C

€177.00 *

· Delivery time: 3 days

RockBoard QUAD 4.4, Pedalboard with Gig Bag

Variante: RBO B 4.4 QUAD B

The RockBoard RBO B 4.4 QUAD B pedalboard offers space for approx. 9 to 18 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 18 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 3.0 kg / 6.61 lbs.including gig bagweight gig bag approx. 1.0 kg / 2.2 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 4.4 QUAD B

€169.00 *

· Delivery time: 3 days

Single shipping

RockBoard QuickMount Type J1- Pedal Mounting Plate for BOSS DD-500, BOSS MD-500, BOSS RC-500, BOSS RV-500, STRYMON BigSky, STRYMON Mobius, STRYMON TimeLine Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals.QuickMount Pedal Mounting Plate for BOSS DD-500, BOSS MD-500, BOSS RC-500, BOSS RV-500, STRYMON BigSky, STRYMON Mobius, STRYMON TimeLine pedalsflat surface, universally usabledimensions (W x H): 171 x 129 mm / 6,73" x 5,08"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T J1

€18.40 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard QuickMount Type J2 - Pedal Mounting Plate for STRYMON NightSky, STRYMON Volante Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals.QuickMount Pedal Mounting Plate for STRYMON NightSky, STRYMON Volante pedalsflat surface, universally usabledimensions (W x H): 179 x 116,5 mm / 7,05" x 4,59"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T J2

€17.90 *

· Delivery time: 3 days

RockBoard DUO 2.2, Pedalboard with Gig Bag

Variante: RBO B 2.2 DUO B

RBO B 2.2 DUO B

€89.00 *

· Delivery time: 3 days

RockBoard TRES 3.0, Pedalboard with Gig Bag

Variante: RBO B 3.0 TRES B

RBO B 3.0 TRES B

€99.00 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Gig Bag

Variante: RBO B 2.0 DUO B

RBO B 2.0 DUO B

€59.00 *

· Delivery time: 3 days

RockBoard TRES 3.1, Pedalboard with Gig Bag

Variante: RBO B 3.1 TRES B

RBO B 3.1 TRES B

€109.00 *

· Delivery time: 3 days

RockBoard DUO 2.1, Pedalboard with Gig Bag

Variante: RBO B 2.1 DUO B

RBO B 2.1 DUO B

€74.00 *

· Delivery time: 3 days

RockBoard DUO 2.3, Pedalboard with Flight Case

Variante: RBO B 2.3 DUO C

RBO B 2.3 DUO C

€177.00 *

· Delivery time: 3 days

RockBoard QUAD 4.4, Pedalboard with Gig Bag

Variante: RBO B 4.4 QUAD B

RBO B 4.4 QUAD B

€169.00 *

· Delivery time: 3 days

Single shipping

RockBoard QuickMount Type J1- Pedal Mounting Plate for BOSS DD-500, BOSS MD-500, BOSS RC-500, BOSS RV-500, STRYMON BigSky, STRYMON Mobius, STRYMON TimeLine Pedals

RBO B QM T J1

€18.40 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard QuickMount Type J2 - Pedal Mounting Plate for STRYMON NightSky, STRYMON Volante Pedals

RBO B QM T J2

€17.90 *

· Delivery time: 3 days

Our 4 year extended warranty is available for RockBoard DUO 2.3, Pedalboard with Gig Bag. Double your warranty period by registering your product.

RockBoard DUO 2.3, Pedalboard with Gig Bag

RockBoard DUO 2.3, Pedalboard with Gig Bag

Login

Get a 4-year guarantee