RockBoard DUO 2.2, Pedalboard with Gig Bag
Delivery to Germany in 3 days
(Item in stock)
Article-No.:
RBO B 2.2 DUO B
RockBoard DUO 2.2, Pedalboard with Gig Bag
The RockBoard RBO B 2.2 DUO B pedalboard offers space for approx. 5 to 9 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.
ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
- pedalboard for effects pedals
- for approx. 5 to 9 effects pedals (depending on size)
- sturdy and light aluminum construction
- slotted design for easy pedal mounting
- mounting holes for RockBoard LED Light (not included) on both sides
- made from 1 cold-rolled aluminum sheet
- additional U-shaped support brace for added rigidity
- 10 degrees angled and absolutely plain board surface - no weld seams
- robust black powder-coated surface
- width 622 mm / 24 31/64"
- depth 142 mm / 5 9/16"
- height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"
- weight 0.9 kg / 2 lbs.
- including gig bag
- weight gig bag approx. 1.1 kg / 2.45 lbs.
- interior dimensions gig bag (L x W x D) 640 x 180 x 100 mm / 25 3/16" x 7 1/16" x 3 15/16"
- including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties
ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
Login
Manufacturer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de
Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
General safety instructions
- Read the operating instructions carefully before using the pedalboard and keep them for future reference.
- Ensure that all connections are tight and secure to avoid malfunctions.
Warnings
- Ensure that the pedalboard is placed on a stable and level surface to prevent it from tipping over or falling.
- Keep the pedalboard away from children and pets to prevent injury and damage.
- Only use the supplied accessories or accessories recommended by the manufacturer to ensure optimum performance and safety
Statutory warranty
All goods are covered by the statutory warranty of at least two years under EU law.
Guarantee
Skip product gallery
Accessories
RockBoard LED Light - Pedalboard Illumination
· Delivery time: 3 days
Variante:
RBO B LED LIGHT
In a time of effects rigs with ever-growing visibility on stage is a major concern for many players. The RockBoard® LED Light will put a stop to groping in the dark once and for all.
This LED light has been specifically designed for use with pedalboards. Immediately compatible with all 2019 Series RockBoard® Pedalboards its simple 3-hole mounting clamp can be fixed to virtually any pedalboard to illuminate your effects rig on dark stages. Adjustable in 4 steps and with 6 color settings it will either put your pedals in the limelight or provide subtle ambient illumination and everything in between.LED light for pedalboardsilluminates your effects rig on dark stagescompatible with most pedalboardsmulti-color LEDs6 colors selectable (white / red / green / blue / yellow / pink)brightness adjustable in 4-stepscurrent draw max. 500 mApower supply via optional 9V DC, 2.1 x 5.5 mm barrel plug, polarity (-) centerROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B LED LIGHT
€23.90
*
RockBoard Pedalboard LED Light V2 - Pedalboard Light
· Delivery time: 3 days
Variante:
RBO B LED LIGHT V2
The RockBoard LED Light (V2) is a multi-colored LED lamp specially designed for use with the RockBoard Pedalboard series. The LED Light (V2) is quickly and easily attached to the RockBoard Pedalboard using a lockable mounting clamp. With 4 selectable brightness levels (100% / 75% / 50% / 25%) and 6 different colors (white / red / green / blue / yellow / pink), the brightness and mood can be perfectly adapted to the environment and personal needs. As a musician, you never grope in the dark again and the beloved pedalboard is perfectly illuminated!multi-colored LED lamp for RockBoard Pedalboardsquick and easy attachment with lockable mounting clampflexible adjustable light for the pedalboard16 powerful LEDs6 selectable colors (white / red / green / blue / yellow / pink)4 selectable brightness levels (100% / 75% / 50% / 25% / off)power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw max. 500 mAdimensions (W x H x D) 220 x 220 x 25 mm / 8 21/32" x 8 21/32" x 63/64"weight ca. 150 g / 0.33 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B LED LIGHT V2
€29.90
*
Skip product gallery
RockBoard ISO Power Block V9 IEC - Isolated Multi Power Supply
· Delivery time: 3 days
Variante:
RBO POW ISO 9 IEC
The RockBoard ISO Power Block 9 IEC is a multi-power supply for effects pedals with 9 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 9 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals9 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise3 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center3 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center3 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 9 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 195 x 88 x 35 mm (7 43/64" x 3 15/32" x 1 3/8")weight: 591 g / 1.30 lbs
RBO POW ISO 9 IEC
€179.90
*
RockBoard QuickMount Type B1 - Pedal Mounting Plate for FRIEDMAN, WAMPLER, WALRUS & MOOER GL 100 pedals
· Delivery time: 3 days
The QuickMount system was developed to completely eliminate the need for cumbersome hook-and-loop tape that attract dust and dirt and is difficult to remove from pedals. The QuickMount fit precisely into the RockBoard Slot Grid on our pedalboards, enables the immediate and secure mounting of effect pedals. The QuickMount are attached to the back of the pedals using the original screws (or, if necessary, with the longer replacement screws provided) and can be removed cleanly without leaving any residue.
The QuickMount mounting plate Type B1 was specifically designed for effects by FRIEDMAN, WAMPLER EQ, WAMPLER VelvetFuzz, WALRUS DeepSix, WALRUS JULIA V2, WALRUS 385 OD, WALRUS Jupiter V2 Pedals, MOOER GL 100, and many other similarly designed effects from other manufacturers. All RockBoard QuickMount pedal mounting plates with a flat surface feature a reusable silicone adhesive pad that adheres securely to any smooth surface without leaving residue, ensuring that pedals with different screw spacings can also be mounted reliably.QuickMount Pedal Mounting Plate for FRIEDMAN, WAMPLER EQ, WAMPLER VelvetFuzz, WALRUS DeepSix, WALRUS JULIA V2, WALRUS 385 OD, WALRUS Jupiter V2, MOOER GL 100 pedalsflat surface, universally usabledimensions (W x H): 72 x 125 mm / 2,83" x 4,92"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B QM T B1
€12.40
*
RockBoard QuickMount Type E - Pedal Mounting Plate For Standard Boss Pedals
· Delivery time: 3 days
The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. The RockBoard QuickMount Type E was specially developed for standard size Boss compact series effects pedals.QuickMount Pedal Mounting Plate for standard size Boss compact series effects pedalsmounting hole distance (W x D): 55 x 111 mm / 2 11/64" x 4 3/8"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B QM T E
€10.20
*
RockBoard Mini Mounting MOD TRS
· Delivery time: 3 days
Variante:
RBO B MOD MINI TRS
The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket.
Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.Mini MOD TRSmounting solution for RockBoard pedalboardsfits in the mounting hole for the RockBoard LED Light1 x 6.3mm (1/4") TRS jack to 2 x 6.3 mm (1/4") TRS jackno drill holes are necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm - 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 50 g / 0.11 lbsincl. mounting screws
RBO B MOD MINI TRS
€14.90
*
RockBoard QuickMount Type O - Pedal Mounting Plate for FRIEDMAN Overdrive Deluxe, WALRUS Descent Pedals
· Delivery time: 3 days
The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals.QuickMount Pedal Mounting Plate for FRIEDMAN Overdrive Deluxe, WALRUS Descent pedalsflat surface, universally usabledimensions (W x H): 146 x 120,5 mm / 5,75" x 4,75"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B QM T O
€11.80
*
Warwick Promo - Coffee Cup, matte, black
· Delivery time: 3 days
The Warwick Promo - Coffee Cup in matt black is the ideal accessory for all music lovers and Warwick fans who want to enjoy their coffee or tea in style. With its elegant, minimalist design and high-quality finish, this coffee cup is not only functional, but also a real eye-catcher. Enjoy your favorite coffee in style and show your passion for music with the Warwick Promo - Coffee Cup a must-have for every Warwick enthusiast!
PR W PRO CUP BLK
€5.90
*
MEC Mono Potentiometer, B100K/cc, Solid Shaft
· Delivery time: 3 days
Variante:
M 85100
mono potentiometersingle shaftB100K (resistance 100 kOhm, (B) linear)center detentsuitable for use as bass or treble control for active pickupsM10 x 0.75 mm threadsmounting diameter 10 mmthread length 9 mmsolid shaftshaft length 11 mmshaft diameter 6 mmincl. nut and washerdimensions incl. lugs (L x W x H) 24 x 16 x 9 mmNote: Electronic components are excluded from the right of return if their cables have been cut or soldered, if they show signs of use, if they have already been installed, or if there is other damage that affects the condition of the goods.Warranty Information for Electronics: Electronic components such as preamps and circuit boards by Sadowsky, MEC, Seymour Duncan, and Bartolini are covered exclusively by the legal warranty period. These items are classified as electronic wear parts and are therefore excluded from the extended 4-year warranty. Thank you for your understanding.
M 85100
€20.70
*
RockBoard QuickMount Cable Fix - Cable Clips (5 pcs.)
· Delivery time: 3 days
The RockBoard QuickMount Cable Fix was designed to keep your patch, signal and power cables together. This little cable clip helps to organize all possible cables underneath and on top of your pedalboard to make sure that your setup is clean and tidy.Cable Clips for RockBoard pedalboardsclips firmly and securely into the RockBoard Slot Gridhelps with the organization and routing of cables on the underside and surface of RockBoard pedalboardsset of 5 pcs.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B QM AC CF
€6.40
*
RockBoard QuickMount QuickRelease Tool
· Delivery time: 3 days
The RockBoard QuickMount QuickRelease Tool is helpful little gadget that will help you to push the QuickMount clamps together on both sides at the same time so you can quickly and easily remove the effects pedal with the attached QuickMount baseplate from your board.QuickRelease Tool for RockBoard QuickMount pedal mounting platesunlocks / releases QuickMount clamps quickly and easilyROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B QM AC QR
€7.40
*
MEC Volume Potentiometer Module, B500K, Push/Pull, DPDT, R4 Connector, Solid Shaft
· Delivery time: 3 days
Variante:
M 81SP003-R4
mono potentiometer module with push/pull switchsingle shaftB500K (resistance 500 kOhm, (B) linear)On/On DPDTpre-fitted with MEC PCB modulesuitable for use as volume control for active pickupssolderless JST R4 2.5 mm connectorM10 x 0.75 mm threadsmounting diameter 10 mmthread length 9 mmsolid shaftshaft length 11 mmshaft diameter 6 mmincl. nut and washerdimensions incl. lugs (L x W x H) 24 x 22 x 22 mmNote: Electronic components are excluded from the right of return if their cables have been cut or soldered, if they show signs of use, if they have already been installed, or if there is other damage that affects the condition of the goods.Warranty Information for Electronics: Electronic components such as preamps and circuit boards by Sadowsky, MEC, Seymour Duncan, and Bartolini are covered exclusively by the legal warranty period. These items are classified as electronic wear parts and are therefore excluded from the extended 4-year warranty. Thank you for your understanding.
M 81SP003-R4
€34.90
*
Skip product gallery
RockBoard DUO 2.1, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 2.1 DUO B
The RockBoard RBO B 2.1 DUO B pedalboard offers space for approx. 4 to 7 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 4 to 7 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.7 kg / 1.6 lbs.including gig bagweight gig bag approx. 0.5 kg / 1.0 lbs.interior dimensions gig bag (L x W x D) 490 x 180 x 100 mm / 19 5/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 2.1 DUO B
€74.00
*
RockBoard TRES 3.0, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.0 TRES B
The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including gig bagweight gig bag approx. 1.2 kg / 2.65 lbs.interior dimensions gig bag (L x W x D) 480 x 260 x 120 mm / 18 7/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 3.0 TRES B
€99.00
*
RockBoard DUO 2.2, Pedalboard with Flight Case
· Delivery time: 3 days
Variante:
RBO B 2.2 DUO C
The RockBoard RBO B 2.2 DUO C pedalboard offers space for approx. 5 to 9 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 9 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 142 mm / 5 9/16"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.9 kg / 2 lbs.including flight caseweight flight case approx. 2.65 kg / 5.85 lbs.interior dimensions (W x D x H) 630 x 170 x 120 mm / 24 13/16" x 6 11/16" x 4 3/4"exterior dimensions (W x D x H) 660 x 230 x 160 mm / 26" x 6 11/16" x 3 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesNote: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 2.2 DUO C
€156.00
*
RockBoard DUO 2.0, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 2.0 DUO B
The RockBoard RBO B 2.0 DUO B pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 3 to 5 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 318 mm / 12 33/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.5 kg / 1.1 lbs.including gig bagweight gig bag approx. 0.8 kg / 1.8 lbs.interior dimensions gig bag (L x W x D) 360 x 180 x 100 mm / 14 3/4" x 7 1/16" x 3 5/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 2.0 DUO B
€59.00
*
RockBoard DUO 2.3, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 2.3 DUO B
The RockBoard RBO B 2.3 DUO B pedalboard offers space for approx. 7 to 11 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation.
The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup.
Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates.
All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 11 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 1.0 kg / 2.2 lbs.including gig bagweight gig bag approx. 0.5 kg / 1.0 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 2.3 DUO B
€109.00
*
RockBoard TRES 3.1, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.1 TRES B
The RockBoard RBO B 3.1 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 522 mm / 20 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.2 kg / 2.6 lbs.including gig bagweight gig bag approx. 1.25 kg / 2.8 lbs.interior dimensions gig bag (L x W x D) 550 x 290 x 120 mm / 24 5/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 3.1 TRES B
€109.00
*
RockBoard TRES 3.2, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.2 TRES B
The RockBoard RBO B 3.2 TRES B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 598 mm / 23 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.3 kg / 2.9 lbs.including gig bagweight gig bag approx. 1.6 kg / 3.5 lbs.interior dimensions gig bag (L x W x D) 650 x 260 x 120 mm / 25 9/16" x 10 1/4" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 3.2 TRES B
€124.00
*
RockBoard QUAD 4.1, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 4.1 QUAD B
The RockBoard RBO B 4.1 QUAD B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.5 kg / 3.3 lbs.interior dimensions gig bag (L x W x D) 505 x 370 x 130 mm / 19 7/8" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1 wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 4.1 QUAD B
€125.00
*
Single shipping
RockBoard TRES 3.3, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.3 TRES B
The RockBoard RBO B 3.3 TRES B pedalboard offers space for approx. 9 to 14 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation.
The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup.
Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates.
All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 9 to 14 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslots for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 722 mm / 28 27/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 29/64" - 2 51/64"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.0 kg / 2.2 lbs.including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B 3.3 TRES B
€154.00
*
RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay
· Delivery time: 3 days
The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench
RBO B MOD 1 V2
€59.90
*
Skip product gallery
RockBoard DUO 2.1, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 2.1 DUO B
RBO B 2.1 DUO B
€74.00
*
RockBoard TRES 3.0, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.0 TRES B
RBO B 3.0 TRES B
€99.00
*
RockBoard DUO 2.2, Pedalboard with Flight Case
· Delivery time: 3 days
Variante:
RBO B 2.2 DUO C
RBO B 2.2 DUO C
€156.00
*
RockBoard DUO 2.0, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 2.0 DUO B
RBO B 2.0 DUO B
€59.00
*
RockBoard DUO 2.3, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 2.3 DUO B
RBO B 2.3 DUO B
€109.00
*
RockBoard TRES 3.1, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.1 TRES B
RBO B 3.1 TRES B
€109.00
*
RockBoard TRES 3.2, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.2 TRES B
RBO B 3.2 TRES B
€124.00
*
RockBoard QUAD 4.1, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 4.1 QUAD B
RBO B 4.1 QUAD B
€125.00
*
Single shipping
RockBoard TRES 3.3, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.3 TRES B
RBO B 3.3 TRES B
€154.00
*
RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay
· Delivery time: 3 days
RBO B MOD 1 V2
€59.90
*
Get a 4-year guarantee
Our 4 year extended warranty is available for RockBoard DUO 2.2, Pedalboard with Gig Bag. Double your warranty period by registering your product.
