RockBoard DUO 2.1, Pedalboard with Gig Bag

(1)

€74.00 Prices include VAT. plus shipping costs

€74.00

Prices include VAT. plus shipping costs

1 Review

Variante

RBO B 2.1 DUO B

RBO B 2.1 DUO C

Delivery to Germany in 3 days (Item in stock)

Article-No.: RBO B 2.1 DUO B

RockBoard DUO 2.1, Pedalboard with Gig Bag

RBO B 2.1 DUO B

RockBoard DUO 2.1, Pedalboard with Flight Case

RBO B 2.1 DUO C

RockBoard DUO 2.1, Pedalboard with Gig Bag

The RockBoard RBO B 2.1 DUO B pedalboard offers space for approx. 4 to 7 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.

pedalboard for effects pedals
for approx. 4 to 7 effects pedals (depending on size)
sturdy and light aluminum construction
slotted design for easy pedal mounting
mounting holes for RockBoard LED Light (not included) on the right side
made from 1 cold-rolled aluminum sheet
additional U-shaped support brace for added rigidity
10 degrees angled and absolutely plain board surface - no weld seams
robust black powder-coated surface
width 470 mm / 18 1/2"
depth 142 mm / 5 19/32"
height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"
weight 0.7 kg / 1.6 lbs.
including gig bag
weight gig bag approx. 0.5 kg / 1.0 lbs.
interior dimensions gig bag (L x W x D) 490 x 180 x 100 mm / 19 5/16" x 7 1/16" x 3 15/16"
including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties

ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RockBoard Pedalboards - Review by PremierGuitar [EN], [11-2018]

Power Supply Placement Guide

Schematic Drawing

Area Overview Bottom Side

RockBoard Pedalboard Size Comparisons

RockBoard PedalSafe and QuickMount Summary

PSU Matrix Boards

Login

E-Mail

Password

Lost password

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Password* Passwords must have a minimum length of 8 characters.

Your address

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Your address

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

1 RATING

Tal cual como lo imaginaba, super versatil, comoda y facil de trasnsportar.

Ariel Rodriguez

30 Apr 2025

Manufacturer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de

Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de

General safety instructions
- Read the operating instructions carefully before using the pedalboard and keep them for future reference.
- Ensure that all connections are tight and secure to avoid malfunctions.

Warnings
- Ensure that the pedalboard is placed on a stable and level surface to prevent it from tipping over or falling.
- Keep the pedalboard away from children and pets to prevent injury and damage.
- Only use the supplied accessories or accessories recommended by the manufacturer to ensure optimum performance and safety

Accessories

RockBoard LED Light - Pedalboard Illumination

Variante: RBO B LED LIGHT

In a time of effects rigs with ever-growing visibility on stage is a major concern for many players. The RockBoard® LED Light will put a stop to groping in the dark once and for all. This LED light has been specifically designed for use with pedalboards. Immediately compatible with all 2019 Series RockBoard® Pedalboards its simple 3-hole mounting clamp can be fixed to virtually any pedalboard to illuminate your effects rig on dark stages. Adjustable in 4 steps and with 6 color settings it will either put your pedals in the limelight or provide subtle ambient illumination and everything in between.LED light for pedalboardsilluminates your effects rig on dark stagescompatible with most pedalboardsmulti-color LEDs6 colors selectable (white / red / green / blue / yellow / pink)brightness adjustable in 4-stepscurrent draw max. 500 mApower supply via optional 9V DC, 2.1 x 5.5 mm barrel plug, polarity (-) centerROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B LED LIGHT

€23.90 *

· Delivery time: 3 days

RockBoard Pedalboard LED Light V2 - Pedalboard Light

Variante: RBO B LED LIGHT V2

The RockBoard LED Light (V2) is a multi-colored LED lamp specially designed for use with the RockBoard Pedalboard series. The LED Light (V2) is quickly and easily attached to the RockBoard Pedalboard using a lockable mounting clamp. With 4 selectable brightness levels (100% / 75% / 50% / 25%) and 6 different colors (white / red / green / blue / yellow / pink), the brightness and mood can be perfectly adapted to the environment and personal needs. As a musician, you never grope in the dark again and the beloved pedalboard is perfectly illuminated!multi-colored LED lamp for RockBoard Pedalboardsquick and easy attachment with lockable mounting clampflexible adjustable light for the pedalboard16 powerful LEDs6 selectable colors (white / red / green / blue / yellow / pink)4 selectable brightness levels (100% / 75% / 50% / 25% / off)power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw max. 500 mAdimensions (W x H x D) 220 x 220 x 25 mm / 8 21/32" x 8 21/32" x 63/64"weight ca. 150 g / 0.33 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B LED LIGHT V2

€29.90 *

· Delivery time: 3 days

Power Adapter for RockBoard ISO DC 1, multi-regional

Power Supply for RBO B MOD ISO DC 1, RockBoard Power MOD ISO DC 1AC power adapter multi-power supply replacement adapter for the Rockboard Power MOD ISO DC 1 can be used in most regions of the world output 24 VDC, 1.5 A2.1 x 5.5 mm barrel plug, polarity (-) centerinput voltage 100 - 240 VACexchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ)ATTENTION: All power supply units are excluded from the extended 4-year warranty. Please note this for future orders and warranty inquiries.

RBO B MOD ISO DC 1PS

€24.90 *

· Delivery time: 3 days

RockBoard PatchWorks Solderless Patch Cable Set - 300 cm / 118 7/64" Cable + 10 Plugs - Chrome

Variante: RBO CAB PW SET CR

The RockBoard® PatchWorks Solderless Patch Cable System features the first genuine 2-directional 2-piece solderless plug design on the market designed and developed in Germany. They will always offer the plug orientation you need, since you can easily flip them from straight to angled or vice-versa. The patented easy-to-use design has a two-piece plug features a slim and compact design for saving pedalboard real estate that can be changed from straight to angled simply by turning one part by 90 degrees. Using professional-grade, high-quality cable and connectors with gold-plated tips, the RockBoard® PatchWorks give you everything you desire for your hi-fi pedalboard. Build your own patch cables, in exactly the length you need them, cutting down on excess cable path and curbing signal loss.solderless patch cable systemset for assembly of 5 patch cablesunique 2-directional 2-piece connector design (patent pending)can be assembled as either straight or angled plugsplug’n play design - no cable stripping requiredincludes 10 plugs and 300 cm / 118 7/64" cablesplug dimensions straight (L x W x H) 20 x 12 x 10 mm / 13/16" x 1/2" x 3/8"plug dimensions angled (L x W x H) 15 x 13 x 10 mm / 9/16" x 1/2" x 3/8"gold plated tipschrome finishlow capacitance cable for maximum signal transparencyflexible oxygen free copper conductor 7 / 0.16 mmstiff PE insulationbraided tinned copper shielding 6 x 16 / 0.12 mmblack outer PVC jacketcapacitance cond./shield less than 8 pF/decimeterconductor resistance of 4 mOhm/decimeteroperating temperature -15°C to +70°C / 5° F to 158° Fdiameter 4 mm / 3/16"incl. TX8 wrench, cable cutter

RBO CAB PW SET CR

€36.90 *

· Delivery time: 3 days

RockBoard CINQUE 5.2, Pedalboard with Flight Case

Variante: RBO B 5.2 CINQUE C

The RockBoard RBO B 5.2 CINQUE C pedalboard offers space for approx. 10 to 20 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 10 to 20 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 424 mm / 16 11/16"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 3.95 kg / 8.7 lbs.including flight caseweight flight case approx. 11.5 kg / 25.4 lbs.interior dimension main compartment (W x D x H) 630 x 435 x 175 mm / 24 1/2" x 17 1/8" x 6 7/8"interior dimensions accessory compartment (W x D x H) 105 x 435 x 125 mm / 4 1/8" x 17 1/8" x 4 15/16"exterior dimensions flight case (W x D x H) 810 x 475 x 210 mm / 31 7/8" x 18 11/16" x 8 1/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 5.2 CINQUE C

€415.00 *

· Delivery time: 3 days

Single shipping

RockBoard QuickMount Type M - Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plates for Dunlop Cry Baby standard size wah pedals and the RockBoard Stage Tuner ST-02flat surface, universally usabledimensions (W x H): 98 x 34 mm / 3,86" x 1,34"mounting hole distance: 62 mm (rear), 80 mm (front) / 2 7/16" (rear), 3 5/32" (front)set of 2 pcs.safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes silicone adhesive pads for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T M

€9.40 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 10 cm / 3 15/16"

Variante: RBO CAB PC F 10 BLK

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 10 cm / 3 15/16"

RBO CAB PC F 10 BLK

€3.90 *

· Delivery time: 3 days

RockBoard Vintage Tweed Series Flat Patch Cable - 10 cm / 3 15/16"

Variante: RBO CAB PC F 10 VT

high-quality flat patch cable with a rectangular profiledouble-shieldedcompact and flat plugs (angled)high-quality 6.3 mm mono jack plugs (TS) made of metalgold-plated connectorsflexible copper conductorbraided tinned copper shieldingadditional aluminum foil shieldingPE (polyethylene) core insulationbraided fabric jacketlength: 10 cm / 3 15/16"vintage tweed

RBO CAB PC F 10 VT

€7.50 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 5 cm / 1 31/32"

Variante: RBO CAB PC F 5 BLK

RBO CAB PC F 5 BLK

€3.60 *

· Delivery time: 3 days

RockBoard QuickMount Type E - Pedal Mounting Plate For Standard Boss Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. The RockBoard QuickMount Type E was specially developed for standard size Boss compact series effects pedals.QuickMount Pedal Mounting Plate for standard size Boss compact series effects pedalsmounting hole distance (W x D): 55 x 111 mm / 2 11/64" x 4 3/8"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T E

€10.20 *

· Delivery time: 3 days

RockBoard Flat Patch Looper/Switcher Connector Cable - 40 cm / 15 3/4"

Variante: RBO CAB PC F 40 BSA

The RockBoard Looper/Switcher Connector Cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular cable and extra thin angled and compact straight plugs, to keep your setup tidy and neat looking. We have optimized our popular Flat Patch Cables for use with looper/switchers or effects pedals with tightly spaced jacks.flat patch cables with rectangular profilecompact and super flat angled/straight plugsperfect for use with looper/switchers or effects pedals with tightly spaced jacksflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimeters6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° F / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16" (angled), 12.5 x 12.5 mm / 1/2" x 1/2" (straight)blacklength 40 cm / 15 3/4"

RBO CAB PC F 40 BSA

€5.50 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 45 cm / 17 23/32"

Variante: RBO CAB PC F 45 BLK

RBO CAB PC F 45 BLK

€5.50 *

· Delivery time: 3 days

RockBoard Hook & Loop Tape - wide - 2 m / 6.6 ft

Variante: RBO HL TAPE 200

self-adhesive Hook and Loop Tape2,000 mm x 50 mm (L x W)Black

RBO HL TAPE 200

€7.50 *

· Delivery time: 3 days

RockBoard Premium Series Flat Instrument Cable, Straight / Angled - 600 cm / 236 7/32"

Variante: RBO CAB FL PR 600 SA

The RockBoard® PREMIUM Flat Instrument Cables take the concept of our flat cable and the design of our audiophile SAPPHIRE Series Patch Cables a step further. Designed and developed in Germany, these cables feature selected, high-grade materials and combine them with our experience in saving space. The flexible conductor core and our double shielding against high and low-frequency interference are enhanced by a layer of shielding that completely prevents the occurrence of cable microphonics for transporting your crystal clear, unaltered, and natural tone. The RockBoard PREMIUM Flat Instrument Cable is available in six different configurations and two lengths.high-end flat instrument cablesuper flat gold-plated 6.3 mm mono audio plugs (straight/angled)flat rectangular cable, prevents cable breakage and jams100% braided tinned copper shielding 16 x 4 x 0,15 mm (34 AWG)flexible copper conductor 50 x 0,12 mm (36 AWG)aluminum foil shield (0,06 mm / 0.002") signal Insulation PE (polyethylene ø 2,9 mm / 7/64")cable mantle PVC (Polyvinylchloride)semi-conductive layer (0,5 mm / 1/64") between signal insulation and shield, for preventing cable microphonicscapacitance conductor/shield less than 8 pF/decimeter conductor resistance less than 8 mOhm/decimeter operating temperature -15° C to +70° C / 5° F to 158° Fouter dimension of cable 8 x 5 mm (5/16” x 13/64”)outer dimensions plugs straight (L x W) 80 x 16 mm (3 5/32” x 5/8”) outer dimensions plugs angled (L x W x D) 50 x 16 x 40 mm (1 31/32” x 5/8” x 1 37/64”)length 600 cm / 236 7/32"black

RBO CAB FL PR 600 SA

€22.90 *

· Delivery time: 3 days

RockBoard Cable Ties, 10 pcs., Extra Small - Black

Variante: RBO CAB TIE 120 B

Cable tie with Hook & Loop material for easy fixing of cables. This cable tie is reusable due to the fastener. Cable ties are available in 5 different sizes and 6 different colors.black material black Hook & Loop partmetal ring10 pieceslength 10 x 120 mm / 25/64" x 4 23/32"

RBO CAB TIE 120 B

€4.50 *

· Delivery time: 3 days

RockBoard QUAD 4.1, Pedalboard with Gig Bag

Variante: RBO B 4.1 QUAD B

The RockBoard RBO B 4.1 QUAD B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.5 kg / 3.3 lbs.interior dimensions gig bag (L x W x D) 505 x 370 x 130 mm / 19 7/8" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1 wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 4.1 QUAD B

€125.00 *

· Delivery time: 1 Month

Single shipping

RockBoard Flat Patch Y-Splitter Cable - 20 cm / 7 7/8" Black

Variante: RBO CAB F Y 20 BK

The RockBoard Flat Y-Splitter cable is extra flat and space-saving. Designed to optimize pedalboard real estate, it features a slim rectangular body and very thin angled plugs. It keeps the setup tidy and neat looking and guarantees a short, clean signal path and pristine signal quality. Using the RockBoard Flat Y-Splitter Cable ensures a perfect match to a TRS effects loop on an amp or pedal or constructive stereo operations.flat Y-splitter cablesplitting TRS stereo signals into TS mono signals or as insert cable for TRS effects loopscompact and super flat angled plugsflexible copper conductor 20 x 0.12 mmtwisted copper shielding 34 x 0.12 mmPE (polyethylene) signal insulationouter PVC insulationcapacity of less than 10 pF/decimetersconductor resistance of less than 10 mOhm/decimeters1 x angled 6.3 mm TRS audio plug2 x angled 6.3 mm TS audio plugs (gray = tip / black = ring)operating temperature: -15° C to +70° C (5° F to 158° F)outer dimensions cable (W x H): 7 x 3 mm (9/32” x 1/8”)outer dimensions plugs (W x H): 12.5 x 7.5 mm (31/64” x 19/64”)length 20 cm / 7 7/8"black

RBO CAB F Y 20 BK

€6.90 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 IEC - Isolated Multi Power Supply

Variante: RBO POW ISO 6 IEC

The RockBoard ISO Power Block 6 IEC is a multi-power supply for effects pedals with 6 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 6 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals6 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise2 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 6 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 130 x 88 x 35 mm (5 1/8" x 3 15/32" x 1 3/8")weight: 386 g / 0.85 lbs

RBO POW ISO 6 IEC

€129.90 *

· Delivery time: 3 days

RockBoard QuickMount Type A - Pedal Mounting Plate For Standard Single Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for Electro Harmonix nano series and MXR standard size pedalsflat surface, universally usabledimensions (W x H): 61 x 112,5 mm / 2,40" x 4,43"mounting hole distance (W x D): 51 x 102 mm / 2 1/64" x 4 1/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T A

€11.20 *

· Delivery time: 3 days

RockBoard QuickMount Type L - Pedal Mounting Plate For Standard Mini Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for MXR, Pigtronix, TC Electronic, Xotic, XVive and many other effects pedals with mini-sized housingsflat surface, universally usabledimensions (W x H): 41 x 93 mm / 1,61" x 3,66"mounting hole distance (W x D): 29 x 72-82 mm / 1 9/64" x 2 53/64" to 3 15/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T L

€12.40 *

· Delivery time: 3 days

RockBoard Stage Tuner ST-01 V2 - Chromatic Pedal Tuner

The RockBoard StageTuner ST-01 combines all aspects that musicians seek in a chromatic pedal tuner. Its large, bright, but not blinding LED 28 segment display provides an easily readable interface even from meters away. The true bypass does not affect your guitar's tone at all and its two outputs allow for either silent or audible tuning. The ST-01's reference frequency can be changed in 1 Hz steps from 432 to 445 Hz with a tuning range from 27,5 Hz (A0) to 4.186 kHz (C8) accuratly down to 1 Cent. It also feature a handy detuning function, which lets you drop your tuning by 1, 2 or 3 semi-tones. All this, combined with the StageTuner ST-01's compact metal housing makes it the optimal companion you will not want to miss on your (RockBoard) pedalboard.pedal tuner for electric instrumentschromatictrue bypass28 segment (FND) & LED displayseparate output for audible tuningtuning range A0 (27,5 Hz) - C8 (4186 Hz)reference frequency 432 - 445 Hz (in 1 Hz steps)detuning function with 3 settings (b / bb / bbb)precision +/- 1 Centmetal housingpower supply via 9V battery (not included) or optional 9V DC power adapter (RockBoard Power Ace), polarity (-) center, 2.1 x 5.5 mm barrel plugcurrent draw max. 22 mAdimensions (W x L x H): 73 x 110 x 47 mm / 2 7/8" x 4 5/16" x 3 15/16"weight 300 g / 0.66 lbs. (incl. battery)

RBO E ST 01 V2

€37.50 *

· Delivery time: 3 days

RockBoard MOD Replacement Screws, 2 pcs.

spare mounting screws for RockBoard MOD patchbaysM3 x 10 mm threadsTX10 drive2 pcs.incl. counter nuts

RBO B MOD SCREWS

€6.90 *

· Delivery time: 3 days

RockBoard Re-usable Spare Rivets for The Tray, 5 pcs.

spare rivets for mounting of RockBoard The Trayre-usableblack5 pcs.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B THE TRAY RIVET

€4.90 *

· Delivery time: 3 days

RockBoard Pedalboard Accessory Pack (2 Feet, Screws & Nuts)

Variante: SP RBO ACC PACK

accessory pack for RockBoard pedalboardsset includes: 2x pedalboard feet, 2x mounting screws, 2x nuts and 1x hex-wrench

SP RBO ACC PACK

€4.90 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 - Isolated Multi Power Supply

Variante: RBO POW BLO ISO 6

The RockBoard ISO Power Block V6 is a multi-power supply for effects pedals with 5 isolated transformers and highly filtered 9V DC power slots and a single 18V DC link output to connect multiple ISO Power Blocks V6 in series for larger setups. The advanced filtering technology used in the 9V DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a short circuit. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the rest of your rig.multi-power supply for effects pedals5 transformer isolated and highly filtered and stabilized power slots18V DC link output to connect multiple ISO Power Blocks V6 in seriesdesigned for powering up to 5 effects pedals simultaneously without any noiseadvanced filter technology prevents high frequency noiseexternal transformer prevents low frequency interferencetotal output power: 22.5 W (2,500 mA)5x 9V DC, 500 mA each, 2.1 x 5.5 mm barrel plug, polarity (-) center1x 18V DC, 2000 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1x 18V DC power adapter (2,000 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 6x RockBoard Flat Power Cable, 60 cm (for connecting effects pedals)dimensions (L x W x H): 120 x 70 x 25 mm / 4 23/32" x 2 3/4" x 63/64"weight: 175 g / 0.38 lbs

RBO POW BLO ISO 6

€89.90 *

· Delivery time: 3 days

RockCable Patch Cable - angled TS (6.3 mm / 1/4") - 30 cm / 11.81"

Variante: RCL 30131 D6

patch cableright angled 1/4" metal plugsgold-plated tiplengths: 30 cm / 11.8"cable outer diameter 6 mm / 0.24"colour: black

RCL 30131 D6

€3.80 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Gig Bag

Variante: RBO B 2.0 DUO B

The RockBoard RBO B 2.0 DUO B pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 3 to 5 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 318 mm / 12 33/64"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.5 kg / 1.1 lbs.including gig bagweight gig bag approx. 0.8 kg / 1.8 lbs.interior dimensions gig bag (L x W x D) 360 x 180 x 100 mm / 14 3/4" x 7 1/16" x 3 5/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.0 DUO B

€59.00 *

· Delivery time: 1 Month

RockBoard TRES 3.0, Pedalboard with Gig Bag

Variante: RBO B 3.0 TRES B

The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including gig bagweight gig bag approx. 1.2 kg / 2.65 lbs.interior dimensions gig bag (L x W x D) 480 x 260 x 120 mm / 18 7/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.0 TRES B

€99.00 *

· Delivery time: 3 days

RockBoard DUO 2.2, Pedalboard with Gig Bag

Variante: RBO B 2.2 DUO B

The RockBoard RBO B 2.2 DUO B pedalboard offers space for approx. 5 to 9 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 9 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 142 mm / 5 9/16"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.9 kg / 2 lbs.including gig bagweight gig bag approx. 1.1 kg / 2.45 lbs.interior dimensions gig bag (L x W x D) 640 x 180 x 100 mm / 25 3/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.2 DUO B

€89.00 *

· Delivery time: 3 days

RockBoard DUO 2.1, Pedalboard with Flight Case

Variante: RBO B 2.1 DUO C

The RockBoard RBO B 2.1 DUO C pedalboard offers space for approx. 4 to 7 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 4 to 7 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.7 kg / 1.6 lbs.including flight caseweight flight case approx. 1.8 kg / 4.0 lbs.interior dimensions (W x D x H) 480 x 165 x 120 mm / 18 7/8" x 6 1/2" x 4 3/4"exterior dimensions (W x D x H) 510 x 195 x145 mm / 20 1/16" x 7 11/16" x 5 11/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties Note: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage. ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.1 DUO C

€122.00 *

· Delivery time: 3 days

RockBoard TRES 3.1, Pedalboard with Gig Bag

Variante: RBO B 3.1 TRES B

The RockBoard RBO B 3.1 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 522 mm / 20 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.2 kg / 2.6 lbs.including gig bagweight gig bag approx. 1.25 kg / 2.8 lbs.interior dimensions gig bag (L x W x D) 550 x 290 x 120 mm / 24 5/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.1 TRES B

€109.00 *

· Delivery time: 1 Month

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard Power MOD ISO DC 1

The Power MOD ISO DC 1 is a multi-power supply for eﬀect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 eﬀects pedals simultaneously. Sophisticated filtering technology eﬀectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected eﬀects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the aﬀected power slot is switched oﬀ, leaving the rest of the eﬀects rig operational.multi-power supply for eﬀects pedalsprovides transformer isolated and highly filtered power slotsfits in a MOD slot on RockBoard® pedalboardscompatible with most other pedalboardsdetachable front plate for mounting on top or underneath pedalboardsadvanced filter technology prevents high frequency noiseexternal mains transformer prevents low frequency interferenceinput polarity protectionindividual status LEDs and short circuit protection for all power slots2 x strain relief clamps for connected cablesinput power: 24 VDC / 1.5 Aoutputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mAincl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters(EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting eﬀects pedals)dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)weight: 500 g / 1.1 lbs

RBO B MOD ISO DC 1

€89.90 *

· Delivery time: 3 days

RockBoard TRES 3.2, Pedalboard with Gig Bag

Variante: RBO B 3.2 TRES B

The RockBoard RBO B 3.2 TRES B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 598 mm / 23 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.3 kg / 2.9 lbs.including gig bagweight gig bag approx. 1.6 kg / 3.5 lbs.interior dimensions gig bag (L x W x D) 650 x 260 x 120 mm / 25 9/16" x 10 1/4" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.2 TRES B

€124.00 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Flight Case

Variante: RBO B 2.0 DUO C

The RockBoard RBO B 2.0 DUO C pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates (except the DUO series). All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 3 to 5 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 318 mm / 12.52"depth 142 mm / 5.59"height incl. rubber feet 35 - 58 mm / 1.38" - 2.28"weight 0.5 kg / 1.1 lbs.including caseweight case approx. 1.3 kg / 2.87 lbs.interior dimensions case (L x W x D) 331 x 167 x 111 mm / 13.03" x 6.58" x 4.37"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties Note: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage. ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.0 DUO C

€99.00 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 - Isolated Multi Power Supply

Variante: RBO POW BLO ISO 6

RBO POW BLO ISO 6

€89.90 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Gig Bag

Variante: RBO B 2.0 DUO B

RBO B 2.0 DUO B

€59.00 *

· Delivery time: 1 Month

RockBoard TRES 3.0, Pedalboard with Gig Bag

Variante: RBO B 3.0 TRES B

RBO B 3.0 TRES B

€99.00 *

· Delivery time: 3 days

RockBoard DUO 2.2, Pedalboard with Gig Bag

Variante: RBO B 2.2 DUO B

RBO B 2.2 DUO B

€89.00 *

· Delivery time: 3 days

RockBoard DUO 2.1, Pedalboard with Flight Case

Variante: RBO B 2.1 DUO C

RBO B 2.1 DUO C

€122.00 *

· Delivery time: 3 days

RockBoard TRES 3.1, Pedalboard with Gig Bag

Variante: RBO B 3.1 TRES B

RBO B 3.1 TRES B

€109.00 *

· Delivery time: 1 Month

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard Power MOD ISO DC 1

RBO B MOD ISO DC 1

€89.90 *

· Delivery time: 3 days

RockBoard TRES 3.2, Pedalboard with Gig Bag

Variante: RBO B 3.2 TRES B

RBO B 3.2 TRES B

€124.00 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Flight Case

Variante: RBO B 2.0 DUO C

RBO B 2.0 DUO C

€99.00 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 - Isolated Multi Power Supply

Variante: RBO POW BLO ISO 6

RBO POW BLO ISO 6

€89.90 *

· Delivery time: 3 days

Our 4 year extended warranty is available for RockBoard DUO 2.1, Pedalboard with Gig Bag. Double your warranty period by registering your product.

RockBoard DUO 2.1, Pedalboard with Gig Bag

RockBoard DUO 2.1, Pedalboard with Gig Bag

Login

Get a 4-year guarantee