RockBoard DUO 2.0, Pedalboard with Gig Bag

€59.00 Prices include VAT. plus shipping costs

€59.00

Prices include VAT. plus shipping costs

Variante

RBO B 2.0 DUO B

RBO B 2.0 DUO C

Delivery to Germany in 29 Days

This product is currently not available!

Article-No.: RBO B 2.0 DUO B

RockBoard DUO 2.0, Pedalboard with Flight Case

RBO B 2.0 DUO C

RockBoard DUO 2.0, Pedalboard with Gig Bag

RBO B 2.0 DUO B

RockBoard DUO 2.0, Pedalboard with Gig Bag

The RockBoard RBO B 2.0 DUO B pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.

pedalboard for effects pedals
for approx. 3 to 5 effects pedals (depending on size)
sturdy and light aluminum construction
slotted design for easy pedal mounting
mounting holes for RockBoard LED Light (not included) on the right side
made from 1 cold-rolled aluminum sheet
additional U-shaped support brace for added rigidity
10 degrees angled and absolutely plain board surface - no weld seams
robust black powder-coated surface
width 318 mm / 12 33/64"
depth 142 mm / 5 19/32"
height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"
weight 0.5 kg / 1.1 lbs.
including gig bag
weight gig bag approx. 0.8 kg / 1.8 lbs.
interior dimensions gig bag (L x W x D) 360 x 180 x 100 mm / 14 3/4" x 7 1/16" x 3 5/16"
including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties

ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

Power Supply Placement Guide

Schematic Drawing

Area Overview Bottom Side

RockBoard Pedalboard Size Comparisons

RockBoard PedalSafe and QuickMount Summary

PSU Matrix Boards

Login

E-Mail

Password

Lost password

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Password* Passwords must have a minimum length of 8 characters.

Your address

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

VAT Registration Number

Email address*

Your address

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Shipping and billing address do not match.

Alternative shipping address

Address Type

Account type*

Salutation

First name*

Last name*

Company*

Department

Legal form

Registration ID

Country*

Search address

Street*

House no.*

Postal code*

City*

Additional address line 1

Phone number*

Privacy

By selecting continue you confirm that you have read our data protection information and accepted our general terms and conditions.

Fields marked with asterisks (*) are required.

No reviews found. Share your insights with others.

Manufacturer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de

Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de

General safety instructions
- Read the operating instructions carefully before using the pedalboard and keep them for future reference.
- Ensure that all connections are tight and secure to avoid malfunctions.

Warnings
- Ensure that the pedalboard is placed on a stable and level surface to prevent it from tipping over or falling.
- Keep the pedalboard away from children and pets to prevent injury and damage.
- Only use the supplied accessories or accessories recommended by the manufacturer to ensure optimum performance and safety

Accessories

RockBoard Handle Set

The HANDLE SET is the ideal solution for safely and conveniently lifting the pedalboard out of the gig bag or flight case and protecting the adjacent pedals during transportation. It meets the highest demands. The ergonomically shaped handles provide a comfortable and secure grip. They allow the pedalboard to be carried effortlessly and are made of durable and robust material to ensure reliable durability and stability when transporting the equipment. Installation is very simple and does not require complex tools. Thanks to its adaptability, the Handle Set can be easily attached to all RockBoard models.Handle set for the RockBoard DUO, TRES, QUAD & CINQUE serieseasy mounting in the slot grid of the RockBoard pedalboard for a secure holdergonomically shaped handles for comfortable handlingpowder-coated steel, black surfaceincl. mounting screws and toolsDimensions (L x W): 129 x 52 mm / 5 5/64" x 2 3/64"Weight: approx. 80 g / 0.18 lbs. (set)ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B HANDLE SET

€22.90 *

· Delivery time: 3 days

RockBoard Mini Mounting MOD DC

Variante: RBO B MOD MINI DC

The Mini Mounting MOD DC provides convenient access to the setup‘s multi-power supply without the need for complicated routing of the power supply cable under the pedalboard. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. The central access to the power supply is provided by a DC 2.1 x 5.5 mm barrel thru jack. Since the Mini Mounting MOD DC uses through-connections between the inner and outer barrel jacks, it is also possible to supply power to external pedals, such as Wah, in the reverse direction. DC power supply cables or „daisy chain“ distributors can be used instead of a multi-power supply to distribute power to the pedals. (Outputs A and B are connected in parallel). Note: To avoid damage to the individual components, the total current consumption of all devices on the board should not exceed the output current of the connected multi-power supply or of the power adapter supplying the „daisy chain“ connections. Make sure that the voltage and polarity of the external power supply match the requirements of the multi-power supply/pedals.Mini MOD DCmounting solution for RockBoard pedalboards and power suppliesfits in the mounting hole for the RockBoard LED Light 1 x DC 2.1 x 5.5 mm barrel jack to 2 x DC 2.1 x 5.5 mm barrel jack, rated for a maximum of 3 A at 30 Vno drill holes necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm / 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 30 g / 0.07 lbsincl. mounting screws

RBO B MOD MINI DC

€14.90 *

· Delivery time: 3 days

RockBoard Mini Mounting MOD TRS

Variante: RBO B MOD MINI TRS

The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket. Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.Mini MOD TRSmounting solution for RockBoard pedalboardsfits in the mounting hole for the RockBoard LED Light1 x 6.3mm (1/4") TRS jack to 2 x 6.3 mm (1/4") TRS jackno drill holes are necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm - 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 50 g / 0.11 lbsincl. mounting screws

RBO B MOD MINI TRS

€14.90 *

· Delivery time: 3 days

RockBoard Pedalboard LED Light V2 - Pedalboard Light

Variante: RBO B LED LIGHT V2

The RockBoard LED Light (V2) is a multi-colored LED lamp specially designed for use with the RockBoard Pedalboard series. The LED Light (V2) is quickly and easily attached to the RockBoard Pedalboard using a lockable mounting clamp. With 4 selectable brightness levels (100% / 75% / 50% / 25%) and 6 different colors (white / red / green / blue / yellow / pink), the brightness and mood can be perfectly adapted to the environment and personal needs. As a musician, you never grope in the dark again and the beloved pedalboard is perfectly illuminated!multi-colored LED lamp for RockBoard Pedalboardsquick and easy attachment with lockable mounting clampflexible adjustable light for the pedalboard16 powerful LEDs6 selectable colors (white / red / green / blue / yellow / pink)4 selectable brightness levels (100% / 75% / 50% / 25% / off)power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw max. 500 mAdimensions (W x H x D) 220 x 220 x 25 mm / 8 21/32" x 8 21/32" x 63/64"weight ca. 150 g / 0.33 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B LED LIGHT V2

€29.90 *

· Delivery time: 3 days

RockBoard QuickMount Pedal Riser

Variante: RBO B PEDAL RISER

The RockBoard QuickMount Pedal Riser is a handy tool for raising the effects pedals in the upper rows of the pedalboard. The pedals can be reached more easily by increasing the height of the upper row and the Pedal Riser enables musicians to use the footswitches on those pedals without unintentionally stepping on the pedals in the front row when no switcher system is used. The innovative QuickMount system can be easily mounted and removed from the slot grid of a RockBoard pedalboard without additional tools. The surface offers the appropriate recesses to mount effects pedals with RockBoard QuickMount pedal mounting plates directly on the Pedal Riser.QuickMount pedal riser for effects pedalsheightening tool for one effects pedal in standard format for better accessibility of the pedal on the upper rows of a RockBoard pedalboardmultiple pedal risers next to each other offer space for larger effects pedalseasy mounting in the slot grid of a RockBoard pedalboardsurface with matching recesses for RockBoard QuickMount pedal mounting platesangled designpowder coated black surfacedimensions (L x W): 135 x 76 mm / 5 5/16" x 2 63/64"height: 25 - 46 mm / 63/64" - 1 13/16" (incl. rubber feet)ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B PEDAL RISER

€16.90 *

· Delivery time: 3 days

RockBoard Step Up 1 - Pedal Riser (Narrow)

Variante: RBO STEP UP 1

RockBoard® Step Up 1Increase the height of 1 standard size pedal for better access on the upper rows of a RockBoard® PedalboardAngledMaterial: metalFixation via included screws or hook & loop tapeDimensions (L x W x H): 90 x 145 x 25 mm / 3 9/16" x 5 11/16" x 1"Also available as version for two (Step Up 2) or three (Step Up 3) pedals

RBO STEP UP 1

€6.90 *

· Delivery time: 3 days

RockBoard Step Up 2 - Pedal Riser (Wide)

Variante: RBO STEP UP 2

RockBoard® Step Up 2Increase the height of 2 standard size pedals for better access on the upper rows of a RockBoard® PedalboardAngledMaterial: metalFixation via included screws or hook & loop tapeDimensions (L x W x H): 180 x 145 x 25 mm / 7 1/16" x 5 11/16" x 1"Also available as version for one (Step Up 1) or three (Step Up 3) pedals

RBO STEP UP 2

€9.90 *

· Delivery time: 3 days

RockBoard Step Up 3 - Pedal Riser (Extra-Wide)

Variante: RBO STEP UP 3

RockBoard® Step Up 3Increase the height of 3 standard size pedals for better access on the upper rows of a RockBoard® PedalboardAngledMaterial: metalFixation via included screws or hook & loop tapeDimensions (L x W x H): 255 x 145 x 25 mm / 10 1/16" x 5 11/16" x 1"Also available as version for one (Step Up 1) or two (Step Up 2) pedals

RBO STEP UP 3

€11.90 *

· Delivery time: 3 days

RockBoard Step Up Set - Pedal Riser (Narrow, Wide & Extra-Wide)

Variante: RBO STEP UP KIT

RockBoard® Step Up 1, 2 & 3 setIncrease the height of 6 standard size pedals for better access on the upper rows of a RockBoard® PedalboardAngledMaterial: metalFixation via included screws or hook & loop tapeDimensions (L x W x H) Step Up 1: 90 x 145 x 25 mm / 3 9/16" x 5 11/16" x 1"Dimensions (L x W x H) Step Up 2: 180 x 145 x 25 mm / 7 1/16" x 5 11/16" x 1"Dimensions (L x W x H) Step Up 3: 255 x 145 x 25 mm / 10 1/16" x 5 11/16" x 1"All Step Ups also available individually

RBO STEP UP KIT

€18.90 *

· Delivery time: 3 days

Keeley Synth-1 - Reverse Attack Fuzz Wave Generator

The Synth-1 allows you to create fuzzed-out synth waves! Use the Filter and Blend controls to mix your guitar with the fuzz from the synth. Go from churning slow-gear reverse swells to sounding like a light saber. The Keeley Synth-1 is a guitar-triggered, single-note wave generator. You control the tone of the wave with the Filter Control. The lead-in time or swell of the note is controlled with the Attack knob. Then use the Blend control to remove the natural tone from your guitar as you slide through synth-sounding fuzz waves. Use an expression pedal to control the Filter, and now you have Wah-Wah-like control of the Synth-1.fuzz / synthesizer / volume swell effects pedalanalog operationfilter frequency controllable via expression pedalChaos mode for changing the detection mode of the synthesizer (normal = positive/negative peak detection, chaos = zero-cross detection)true bypasscontrols for Filter, Level, Blend and AttackChaos toggle switch changing dimensional triggering3-way Waveform rocker switch for selecting the filter waveform (sine / sawtooth / square)status LEDsBypass footswitchmetal housing6.3 mm mono input and output jacks6.3 mm TRS Expression input jackpower supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw 70 mAbattery operation not supporteddimensions (W x D x H) 95 x 120 x 50 mmweight 350 gmade in USA

KE SYNTH 1

€209.00 *

· Delivery time: 3 days

RockBoard PedalSafe Type D3 - Protective Cover and Rockboard Mounting Plate for WAMPLER Paisley Deluxe, WAMPLER HotWired, WAMPLER Dual Fusion pedals

Variante: RBO B PS T D3 RBO

The RockBoard PedalSafe system was designed to keep your pedals safe, secure and in pristine condition. The flexible PedalSafe Type D3 Protective Cover and the QuickMount Pedal Mounting Plate fit for WAMPLER Paisley Deluxe, WAMPLER HotWired, WAMPLER Dual Fusion pedals. The crystal-clear pedal cover allows you to see your settings while the shell is protecting them against accidental adjustments. This set includes the protective cover (PedalSafe) and the RockBoard mounting plate (QuickMount). The RockBoard QuickMount system was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard slot grid on our pedalboards and allows for instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue.PedalSafe Protective Cover for WAMPLER Paisley Deluxe, WAMPLER HotWired, WAMPLER Dual Fusion pedalsincludes QuickMount Pedal Mounting Plate Type D for RockBoard pedalboards and replacement mounting screwsprotects your effects pedals from dirt and weathersecures settings against accidental knob adjustmentssafely mounts your effects pedals on RockBoard pedalboardsno permanent modifications necessaryROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B PS T D3 RBO

€29.90 *

· Delivery time: 3 days

RockBoard QuickMount Type B1 - Pedal Mounting Plate for FRIEDMAN, WAMPLER, WALRUS & MOOER GL 100 pedals

The QuickMount system was developed to completely eliminate the need for cumbersome hook-and-loop tape that attract dust and dirt and is difficult to remove from pedals. The QuickMount fit precisely into the RockBoard Slot Grid on our pedalboards, enables the immediate and secure mounting of effect pedals. The QuickMount are attached to the back of the pedals using the original screws (or, if necessary, with the longer replacement screws provided) and can be removed cleanly without leaving any residue. The QuickMount mounting plate Type B1 was specifically designed for effects by FRIEDMAN, WAMPLER EQ, WAMPLER VelvetFuzz, WALRUS DeepSix, WALRUS JULIA V2, WALRUS 385 OD, WALRUS Jupiter V2 Pedals, MOOER GL 100, and many other similarly designed effects from other manufacturers. All RockBoard QuickMount pedal mounting plates with a flat surface feature a reusable silicone adhesive pad that adheres securely to any smooth surface without leaving residue, ensuring that pedals with different screw spacings can also be mounted reliably.QuickMount Pedal Mounting Plate for FRIEDMAN, WAMPLER EQ, WAMPLER VelvetFuzz, WALRUS DeepSix, WALRUS JULIA V2, WALRUS 385 OD, WALRUS Jupiter V2, MOOER GL 100 pedalsflat surface, universally usabledimensions (W x H): 72 x 125 mm / 2,83" x 4,92"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T B1

€12.40 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 10 cm / 3 15/16"

Variante: RBO CAB PC F 10 BLK

The new RockBoard patch cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular body and extra thin angled plugs, to keep your setup tidy and neat looking.flat patch cables with rectangular profilecompact and super flat angled plugsflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"blacklength 10 cm / 3 15/16"

RBO CAB PC F 10 BLK

€3.90 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 5 cm / 1 31/32"

Variante: RBO CAB PC F 5 BLK

RBO CAB PC F 5 BLK

€3.60 *

· Delivery time: 3 days

RockBoard QuickMount Type E - Pedal Mounting Plate For Standard Boss Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. The RockBoard QuickMount Type E was specially developed for standard size Boss compact series effects pedals.QuickMount Pedal Mounting Plate for standard size Boss compact series effects pedalsmounting hole distance (W x D): 55 x 111 mm / 2 11/64" x 4 3/8"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincludes replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T E

€10.20 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 45 cm / 17 23/32"

Variante: RBO CAB PC F 45 BLK

RBO CAB PC F 45 BLK

€5.50 *

· Delivery time: 3 days

RockBoard Hook & Loop Tape - wide - 2 m / 6.6 ft

Variante: RBO HL TAPE 200

self-adhesive Hook and Loop Tape2,000 mm x 50 mm (L x W)Black

RBO HL TAPE 200

€7.50 *

· Delivery time: 3 days

RockBoard BigToe Footswitch Topper, 3 pcs. - Silver

Variante: RBO FT BIGTOE SI

Footswitch topper2-piece design for tight fit and easy removeabilityenlarges the footswitch diameter for easier accessibilityfits most common footswitchesoutside diameter (top) 24.5 mminside diameter 9.5 mm (flexible)additional height ca. 2.9 mmmade of anodized aluminum and thermoplastic rubbersilver3 pieces

RBO FT BIGTOE SI

€7.80 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 80 cm / 31 1/2"

Variante: RBO CAB PC F 80 BLK

RBO CAB PC F 80 BLK

€6.90 *

· Delivery time: 3 days

RockBoard Gold Series Flat Patch Cable - 100 cm / 39 3/8"

Variante: RBO CAB PC F 100 GD

The RockBoard GOLD Series Flat Patch Cables lift our popular Flat Patch Cables onto a new level of quality. Designed to be extra flat and space-saving, they optimize pedalboard real-estate, featuring a slim rectangular body and extra thin angled plugs. Their contacts and plug housings are gold-plated. The Cables feature a double shielding of braided copper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. The Gold Series Flat Patch Cables guarantee best signal quality and keep your setup tidy and neat looking.high quality double shielded flat patch cables with rectangular profilecompact and super flat angled plugsgold-plated connectorsmetal plug housingsflexible copper conductor (20 x 0.12 mm / 36 AWG)90 % braided tinned copper shielding (4 x 16 x 0.12 mm / 36 AWG)additional aluminum foil shieldingPE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimeterconductor resistance less than 10 mOhm/decimeterangled 6.3 mm mono audio plugsoperating temperature -15° C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"black with gold-plated plug housingslength 100 cm / 39 3/8"

RBO CAB PC F 100 GD

€8.90 *

· Delivery time: 3 days

RockBoard S-Connector - Nickel

Variante: RBO PC S NK

The RockBoard S-Connector is a super-compact pedal connector (jack coupler). The width of approx. 12 millimeters (1/2") makes your pedals come closer together. Using the 6.3 mm (1/4") S-Connector plug guarantees a short, clean signal path and pristine signal quality.straight pedal connector (jack coupler)short distance between two pedalsconnects side-mounted jacks6.3 mm mono audio plugs on both sideswidth approx. 12 mm (1/2)nickel

RBO PC S NK

€1.90 *

· Delivery time: 3 days

RockBoard PedalSafe Type D2 - Protective Cover And RockBoard Mounting Plate For Large Horizontal Pedals

Variante: RBO B PS T D2 RBO

The RockBoard PedalSafe system was designed to keep your pedals safe, secure and in pristine condition. The flexible PedalSafe Type D2 Protective Cover and the QuickMount Pedal Mounting Plate fit for Electro Harmonix, Keeley Electronics, MXR and many other effects pedals with larger horizontal housings and a two-row knob configuration. The crystal-clear pedal cover allows you to see your settings while the shell is protecting them against accidental adjustments. This set includes the protective cover (PedalSafe) and the RockBoard mounting plate (QuickMount). The RockBoard QuickMount system was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard slot grid on our pedalboards and allows for instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue.PedalSafe Protective Cover for Electro Harmonix, Keeley Electronics, MXR and many other effects pedals with larger horizontal housings and a two-row knob configurationsuitable for most effects pedals with housing dimensions of approx. 94 x 125 x 37 mm / 3 45/64" x 4 59/64" x 1 29/64"includes QuickMount Pedal Mounting Plate Type D for RockBoard pedalboards, replacement mounting screws and shim plate to slightly raise the height of pedals '- QuickMount mounting hole distance (W x D): 110 x 78-83 mm / 4 21/64" x 3 5/64"-3 17/64"protects your effects pedals from dirt and weathersecures settings against accidental knob adjustmentssafely mounts your effects pedals on RockBoard pedalboardsno permanent modifications necessaryROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B PS T D2 RBO

€26.90 *

· Delivery time: 3 days

RockBoard Flat Patch Looper/Switcher Connector Cable - 20 cm / 7 7/8"

Variante: RBO CAB PC F 20 BSA

The RockBoard Looper/Switcher Connector Cables are extra flat and space-saving. Designed to optimize pedalboard real estate, they feature a slim rectangular cable and extra thin angled and compact straight plugs, to keep your setup tidy and neat looking. We have optimized our popular Flat Patch Cables for use with looper/switchers or effects pedals with tightly spaced jacks.flat patch cables with rectangular profilecompact and super flat angled/straight plugsperfect for use with looper/switchers or effects pedals with tightly spaced jacksflexible copper conductor (20 x 0.12 mm / 36 AWG)twisted copper shielding (34 x 0.12 mm / 36 AWG)PE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimeters6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° F / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16" (angled), 12.5 x 12.5 mm / 1/2" x 1/2" (straight)blacklength 20 cm / 7 7/8"

RBO CAB PC F 20 BSA

€4.90 *

· Delivery time: 3 days

RockBoard Flat Patch Cable - 30 cm / 11 13/16"

Variante: RBO CAB PC F 30 BLK

RBO CAB PC F 30 BLK

€4.90 *

· Delivery time: 3 days

Rockboard Cable Set 50 CableTies & 25 CableTies Holder

Cable management for pedalboards, optimized for neat, quick routing and fixing of cable paths. Perfect for organizing flexible customization options on and under the pedalboard. The set includes 50 cable ties and 25 matching holders to securely hold the cable ties in place. The cable tie holders are equipped with proven 3M™ adhesive surfaces, which guarantees reliable adhesion.Intelligent cable management set50 x cable ties 2 x 150 mm, black25 x holders for cable ties 20 x 20 mm, black, self-adhesiveProven 3M™ adhesive pad on the cable tie holders for a secure and powerful hold

RBO CO SET 1

€3.90 *

· Delivery time: 3 days

RockBoard Gold Series Flat Patch Cable - 5 cm / 1 31/32"

Variante: RBO CAB PC F 5 GD

The RockBoard GOLD Series Flat Patch Cables lift our popular Flat Patch Cables onto a new level of quality. Designed to be extra flat and space-saving, they optimize pedalboard real-estate, featuring a slim rectangular body and extra thin angled plugs. Their contacts and plug housings are gold-plated. The Cables feature a double shielding of braided copper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. The Gold Series Flat Patch Cables guarantee best signal quality and keep your setup tidy and neat looking.high quality double shielded flat patch cables with rectangular profilecompact and super flat angled plugsgold-plated connectorsmetal plug housingsflexible copper conductor (20 x 0.12 mm / 36 AWG)braided copper shielding (4 x 16 x 0.12 mm / 36 AWG)additional aluminum foil shieldingPE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimetersconductor resistance less than 10 mOhm/decimetersangled 6.3 mm mono audio plugsoperating temperature -15º C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16"black with gold-plated plug housingslength 5 cm / 1 31/32"

RBO CAB PC F 5 GD

€6.90 *

· Delivery time: 3 days

RockBoard Flat Patch Looper/Switcher Connector Cable - 60 cm / 23 5/8"

Variante: RBO CAB PC F 60 BSA

RBO CAB PC F 60 BSA

€5.90 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 IEC - Isolated Multi Power Supply

Variante: RBO POW ISO 6 IEC

The RockBoard ISO Power Block 6 IEC is a multi-power supply for effects pedals with 6 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 6 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.multi-power supply for effects pedals6 x transformer isolated and highly filtered and stabilized power slots1 x USB outputdesigned for powering up to 6 effects pedals simultaneously without any noiseadvanced filter technology prevents high-frequency noise2 x switchable power slots (9V DC, 500 mA / 12V DC, 375 mA / 15V DC, 300 mA / 18V DC, 250 mA), 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 500 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center2 x power slots 9V DC, 250 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center1 x USB-A output 5V, 2,000 mA short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinternational input voltage operation with supply voltages from 100 to 230V AC / 47 - 63 Hzcompact and sturdy aluminum housingincluding 6 x RockBoard Flat Power Cable 60 cm / 23 5/8" (for connecting effects pedals)including 1 x AC power cable, input voltage 100 - 240V AC and 47 - 63 Hzdimensions (L x W x H): 130 x 88 x 35 mm (5 1/8" x 3 15/32" x 1 3/8")weight: 386 g / 0.85 lbs

RBO POW ISO 6 IEC

€129.90 *

· Delivery time: 3 days

RockBoard QuickMount Type C - Pedal Mounting Plate For Large Vertical Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for EarthQuaker Devices, Electro Harmonix, Keeley Electronics, MXR, JHS Pedals, Darkglass Electronics and many other effects pedals with larger vertical housingsflat surface, universally usabledimensions (W x H): 94 x 124 mm / 3,70" x 4,88"mounting hole distance (W x D): 78 to 83 x 110 mm / 3 5/64" to 3 17/64" x 4 21/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T C

€13.50 *

· Delivery time: 3 days

RockBoard Frame 2 XL for Duo 2.0, 2.1, 2.2 & 2.3

Variante: RBO B FRAME 2 XL

The Rockboard Frame 2 XL is an optional replacement brace for mounting even the biggest multi-power supplies underneath your RockBoard pedalboard DUO 2.0, 2.1, 2.2 and 2.3. Mounting power supplies can be a difficult task. With its innovative universal power supply mounting solution, the new Rockboard series of pedalboards already offers an easy way to fix a multitude of available power supply units. However, there are some, even larger power supplies that just won't fit. The solution for this problem is the Rockboard Frame 2 XL, which allows you to mount even larger and wider multi-power supplies without sacrificing the stability of your board. You can replace the original vertical braces of your Rockboard DUO 2.0, 2.1, 2.2 or 2.3 with the Frame 2 XL. Simply loosen the two mounting screws and replace the original brace with the Frame 2 XL and re-install the screws. It's that easy.optional brace for RockBoard DUO 2.0, 2.1, 2.2 & 2.3drop-in replacementallows the mounting of even the biggest power supplies underneath your RockBoard pedalboardmade of aluminumdimensions (L x W x H): 126,5 x 52 x 7,5 mm / 4 63/64" x 2 3/64" x 19/64"weight: 75 g / 0.17 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B FRAME 2 XL

€12.90 *

· Delivery time: 3 days

RockBoard QuickMount Type WH2 - Pedal Mounting Plate for DUNLOP WAY HUGE GreenRhino, DUNLOP WAY HUGE RedLlama Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals.QuickMount Pedal Mounting Plate for DUNLOP WAY HUGE GreenRhino, DUNLOP WAY HUGE RedLlama pedalsflat surface, universally usabledimensions (W x H): 82,5 x 125,5 mm / 3,25" x 4,94"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screwsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T WH2

€10.60 *

· Delivery time: 3 days

RockBoard QuickMount Type A - Pedal Mounting Plate For Standard Single Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for Electro Harmonix nano series and MXR standard size pedalsflat surface, universally usabledimensions (W x H): 61 x 112,5 mm / 2,40" x 4,43"mounting hole distance (W x D): 51 x 102 mm / 2 1/64" x 4 1/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T A

€11.20 *

· Delivery time: 3 days

Warwick RockBass Corvette Basic, 6-String, Fretless - Solid Black High Polish

Warwick RockBass Corvette Basic6-string electric bassfretless version34" long scale2-piece solid Alder body5-piece laminated Maple neck with black veneer stripestwo carbon bars for neck reinforcement, from 12th to 24th frettwo-way steel trussrodbolt-on constructionTigerstripe Ebony fingerboard47" radiusJust-A-Nut III Tedur nutnut width 52.0 mm / 2.0"glow-in-the-dark side dotsactive MEC J/J pickupsactive 2-band electronicscontrols for Volume / Balance / Treble / Basscopper shielded electronic compartment, pickup routings with shielding paintthreaded inserts for pickup screws Warwick Easy-Access electronics compartment and truss rod coverWarwick machine heads2-piece Warwick 3D bridgestring spacing 16.5 mm / 21/32"distance B to C string 82.5 mm / 3 1/4"Warwick Red Strings Bass String Set, Nickel Plated Steel, .025-.135, Medium Scale (46401 M 6 025/135")Warwick S-Security LocksSolid Black High Polish finishchrome hardwareincl. Warwick Strap und Warwick Fret Protectorincl. Warwick trussrod tool, hex key 1,5 mm, Warwick microfiber cloth and Warwick S-Security Locks and 9 V batteryincl. RockBass Starline Premium Gig Bagapprox. weight 4.5 kg / 9.9 lbs.

WRB1506 23AA ALD FL

€1,049.00 *

· Delivery time: 2 weeks

Bulky good

Single shipping

RockBoard Flat Instrument Cable, Straight / Straight - 300 cm / 118 7/64"

Variante: RBO CAB FL 300BLK SS

The RockBoard Flat Instrument Cable is extra flat and super-flexible. It features a slim rectangular body and extra thin angled plugs to prevent cable tangle as well as lead breakage. This guarantees a clean signal path and pristine signal quality. The RockBoard Flat Instrument Cable is available in six different configurations and two lengths.flat instrument cablesuper flat 6.3 mm mono audio plugs (straight/straight)operating temperature -15° C to +70° C (5° F to 158° F)flexible twisted copper shielding 34 x 0.12 mmflexible copper conductor 20 x 0.12 mmsignal insulation PE (polyethylene)outer PVC insulationcapacitance conductor/shield less than 10 pF/decimeterconductor resistance less than 10 mOhm/decimeterOuter dimensions cable 7 x 3 mm (9/32” x 1/8”)Outer dimensions plug 12.5 x 7.5 mm (31/64” x 19/64”)length 300 cm (118 7/64")black

RBO CAB FL 300BLK SS

€6.90 *

· Delivery time: 3 days

RockBoard DUO 2.1, Pedalboard with Gig Bag

Variante: RBO B 2.1 DUO B

The RockBoard RBO B 2.1 DUO B pedalboard offers space for approx. 4 to 7 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 4 to 7 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 142 mm / 5 19/32"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.7 kg / 1.6 lbs.including gig bagweight gig bag approx. 0.5 kg / 1.0 lbs.interior dimensions gig bag (L x W x D) 490 x 180 x 100 mm / 19 5/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.1 DUO B

€74.00 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Flight Case

Variante: RBO B 2.0 DUO C

The RockBoard RBO B 2.0 DUO C pedalboard offers space for approx. 3 to 5 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates (except the DUO series). All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 3 to 5 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 318 mm / 12.52"depth 142 mm / 5.59"height incl. rubber feet 35 - 58 mm / 1.38" - 2.28"weight 0.5 kg / 1.1 lbs.including caseweight case approx. 1.3 kg / 2.87 lbs.interior dimensions case (L x W x D) 331 x 167 x 111 mm / 13.03" x 6.58" x 4.37"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties Note: Even though the Rockboard Flight Cases are robustly built and can withstand transport in the boot of a car or in a tour bus without any problems, it is difficult to predict how they will be handled as checked baggage at airports. Therefore, we cannot guarantee that the Rockboard cases will survive transport as checked baggage on an airplane without damage. ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.0 DUO C

€99.00 *

· Delivery time: 3 days

RockBoard TRES 3.0, Pedalboard with Gig Bag

Variante: RBO B 3.0 TRES B

The RockBoard RBO B 3.0 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 442 mm / 17 13/32"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 0.95 kg / 2.1 lbs.including gig bagweight gig bag approx. 1.2 kg / 2.65 lbs.interior dimensions gig bag (L x W x D) 480 x 260 x 120 mm / 18 7/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.0 TRES B

€99.00 *

· Delivery time: 3 days

RockBoard TRES 3.1, Pedalboard with Gig Bag

Variante: RBO B 3.1 TRES B

The RockBoard RBO B 3.1 TRES B pedalboard offers space for approx. 5 to 10 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 10 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch baysrobust black powder-coated surfacewidth 522 mm / 20 35/64"depth 236 mm / 9 19/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.2 kg / 2.6 lbs.including gig bagweight gig bag approx. 1.25 kg / 2.8 lbs.interior dimensions gig bag (L x W x D) 550 x 290 x 120 mm / 24 5/8" x 11 7/16" x 4 3/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 3.1 TRES B

€109.00 *

· Delivery time: 1 Month

RockBoard Power MOD ISO DC 1

The Power MOD ISO DC 1 is a multi-power supply for eﬀect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 eﬀects pedals simultaneously. Sophisticated filtering technology eﬀectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected eﬀects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the aﬀected power slot is switched oﬀ, leaving the rest of the eﬀects rig operational.multi-power supply for eﬀects pedalsprovides transformer isolated and highly filtered power slotsfits in a MOD slot on RockBoard® pedalboardscompatible with most other pedalboardsdetachable front plate for mounting on top or underneath pedalboardsadvanced filter technology prevents high frequency noiseexternal mains transformer prevents low frequency interferenceinput polarity protectionindividual status LEDs and short circuit protection for all power slots2 x strain relief clamps for connected cablesinput power: 24 VDC / 1.5 Aoutputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mAincl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters(EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting eﬀects pedals)dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)weight: 500 g / 1.1 lbs

RBO B MOD ISO DC 1

€89.90 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard DUO 2.2, Pedalboard with Gig Bag

Variante: RBO B 2.2 DUO B

The RockBoard RBO B 2.2 DUO B pedalboard offers space for approx. 5 to 9 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 5 to 9 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsrobust black powder-coated surfacewidth 622 mm / 24 31/64"depth 142 mm / 5 9/16"height incl. rubber feet 35 - 58 mm / 1 3/8" - 2 5/16"weight 0.9 kg / 2 lbs.including gig bagweight gig bag approx. 1.1 kg / 2.45 lbs.interior dimensions gig bag (L x W x D) 640 x 180 x 100 mm / 25 3/16" x 7 1/16" x 3 15/16"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 2.2 DUO B

€89.00 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 - Isolated Multi Power Supply

Variante: RBO POW BLO ISO 6

The RockBoard ISO Power Block V6 is a multi-power supply for effects pedals with 5 isolated transformers and highly filtered 9V DC power slots and a single 18V DC link output to connect multiple ISO Power Blocks V6 in series for larger setups. The advanced filtering technology used in the 9V DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a short circuit. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the rest of your rig.multi-power supply for effects pedals5 transformer isolated and highly filtered and stabilized power slots18V DC link output to connect multiple ISO Power Blocks V6 in seriesdesigned for powering up to 5 effects pedals simultaneously without any noiseadvanced filter technology prevents high frequency noiseexternal transformer prevents low frequency interferencetotal output power: 22.5 W (2,500 mA)5x 9V DC, 500 mA each, 2.1 x 5.5 mm barrel plug, polarity (-) center1x 18V DC, 2000 mA, 2.1 x 5.5 mm barrel plug, polarity (-) center short circuit protection for all power slots, designated red LEDs for each slot indicate short circuit or wrong polarityinput voltage 18V DCincl. 1x 18V DC power adapter (2,000 mA) with exchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ), input voltage 100-240V ACincl. 6x RockBoard Flat Power Cable, 60 cm (for connecting effects pedals)dimensions (L x W x H): 120 x 70 x 25 mm / 4 23/32" x 2 3/4" x 63/64"weight: 175 g / 0.38 lbs

RBO POW BLO ISO 6

€89.90 *

· Delivery time: 3 days

RockBoard QUAD 4.1, Pedalboard with Gig Bag

Variante: RBO B 4.1 QUAD B

The RockBoard RBO B 4.1 QUAD B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 7 to 12 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on the right sidemade from 1 cold-rolled aluminum sheetadditional U-shaped support brace for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 470 mm / 18 1/2"depth 330 mm / 12 63/64"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 1.5 kg / 3.3 lbs.including gig bagweight gig bag approx. 1.5 kg / 3.3 lbs.interior dimensions gig bag (L x W x D) 505 x 370 x 130 mm / 19 7/8" x 14 9/16" x 5 1/8"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1 wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B 4.1 QUAD B

€125.00 *

· Delivery time: 4 weeks

Single shipping

RockBoard QuickMount Type A - Pedal Mounting Plate For Standard Single Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for Electro Harmonix nano series and MXR standard size pedalsflat surface, universally usabledimensions (W x H): 61 x 112,5 mm / 2,40" x 4,43"mounting hole distance (W x D): 51 x 102 mm / 2 1/64" x 4 1/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T A

€11.20 *

· Delivery time: 3 days

RockBoard DUO 2.1, Pedalboard with Gig Bag

Variante: RBO B 2.1 DUO B

RBO B 2.1 DUO B

€74.00 *

· Delivery time: 3 days

RockBoard DUO 2.0, Pedalboard with Flight Case

Variante: RBO B 2.0 DUO C

RBO B 2.0 DUO C

€99.00 *

· Delivery time: 3 days

RockBoard TRES 3.0, Pedalboard with Gig Bag

Variante: RBO B 3.0 TRES B

RBO B 3.0 TRES B

€99.00 *

· Delivery time: 3 days

RockBoard TRES 3.1, Pedalboard with Gig Bag

Variante: RBO B 3.1 TRES B

RBO B 3.1 TRES B

€109.00 *

· Delivery time: 1 Month

RockBoard Power MOD ISO DC 1

RBO B MOD ISO DC 1

€89.90 *

· Delivery time: 3 days

RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay

RBO B MOD 1 V2

€59.90 *

· Delivery time: 3 days

RockBoard DUO 2.2, Pedalboard with Gig Bag

Variante: RBO B 2.2 DUO B

RBO B 2.2 DUO B

€89.00 *

· Delivery time: 3 days

RockBoard ISO Power Block V6 - Isolated Multi Power Supply

Variante: RBO POW BLO ISO 6

RBO POW BLO ISO 6

€89.90 *

· Delivery time: 3 days

RockBoard QUAD 4.1, Pedalboard with Gig Bag

Variante: RBO B 4.1 QUAD B

RBO B 4.1 QUAD B

€125.00 *

· Delivery time: 4 weeks

Single shipping

RockBoard QuickMount Type A - Pedal Mounting Plate For Standard Single Pedals

RBO B QM T A

€11.20 *

· Delivery time: 3 days

Our 4 year extended warranty is available for RockBoard DUO 2.0, Pedalboard with Gig Bag. Double your warranty period by registering your product.

RockBoard DUO 2.0, Pedalboard with Gig Bag

RockBoard DUO 2.0, Pedalboard with Gig Bag

Login

Get a 4-year guarantee