RockBoard CINQUE 5.3 MAX, Pedalboard with Gig Bag
Single shipping
Delivery to Germany in 3 days
(Item in stock)
Article-No.:
RBO B 5.3 CINQ MAX B
RockBoard CINQUE 5.3 MAX, Pedalboard with Gig Bag
The RockBoard RBO B 5.3 CINQUE MAX B pedalboard offers space for approx. 15 to 25 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.
ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
- pedalboard for effects pedals with two levels
- for approx. 15 to 25 effects pedals (depending on size)
- sturdy and light aluminum construction
- slotted design for easy pedal mounting
- mounting holes for RockBoard LED Light (not included) on both sides
- made from cold-rolled aluminum sheet
- additional U-shaped support brace for added rigidity
- 10 degrees angled and absolutely plain board surface - no weld seams
- slots for RockBoard® MOD patch bays
- robust black powder-coated surface
- width 826 mm / 32 33/64"
- depth 498 mm / 19 39/64"
- width 2. level 826 / 32 33/64"
- depth 2. level 218 / 8 37/64"
- height incl. rubber feet 37 - 164 mm / 6 29/64" - "
- weight 6.5 kg / 14.33 lbs.
- including gig bag
- weight gig bag approx. 3.5 kg / 7.72 lbs.
- including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable ties
ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
Login
Manufacturer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
info@rockboard.de
https://www.rockboard.de
Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
General safety instructions
- Read the operating instructions carefully before using the pedalboard and keep them for future reference.
- Ensure that all connections are tight and secure to avoid malfunctions.
Warnings
- Ensure that the pedalboard is placed on a stable and level surface to prevent it from tipping over or falling.
- Keep the pedalboard away from children and pets to prevent injury and damage.
- Only use the supplied accessories or accessories recommended by the manufacturer to ensure optimum performance and safety
Skip product gallery
Accessories
RockBoard LED Light - Pedalboard Illumination
· Delivery time: 3 days
Variante:
RBO B LED LIGHT
In a time of effects rigs with ever-growing visibility on stage is a major concern for many players. The RockBoard® LED Light will put a stop to groping in the dark once and for all.
This LED light has been specifically designed for use with pedalboards. Immediately compatible with all 2019 Series RockBoard® Pedalboards its simple 3-hole mounting clamp can be fixed to virtually any pedalboard to illuminate your effects rig on dark stages. Adjustable in 4 steps and with 6 color settings it will either put your pedals in the limelight or provide subtle ambient illumination and everything in between.LED light for pedalboardsilluminates your effects rig on dark stagescompatible with most pedalboardsmulti-color LEDs6 colors selectable (white / red / green / blue / yellow / pink)brightness adjustable in 4-stepscurrent draw max. 500 mApower supply via optional 9V DC, 2.1 x 5.5 mm barrel plug, polarity (-) centerROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B LED LIGHT
€23.90
*
RockBoard Pedalboard LED Light V2 - Pedalboard Light
· Delivery time: 3 days
Variante:
RBO B LED LIGHT V2
The RockBoard LED Light (V2) is a multi-colored LED lamp specially designed for use with the RockBoard Pedalboard series. The LED Light (V2) is quickly and easily attached to the RockBoard Pedalboard using a lockable mounting clamp. With 4 selectable brightness levels (100% / 75% / 50% / 25%) and 6 different colors (white / red / green / blue / yellow / pink), the brightness and mood can be perfectly adapted to the environment and personal needs. As a musician, you never grope in the dark again and the beloved pedalboard is perfectly illuminated!multi-colored LED lamp for RockBoard Pedalboardsquick and easy attachment with lockable mounting clampflexible adjustable light for the pedalboard16 powerful LEDs6 selectable colors (white / red / green / blue / yellow / pink)4 selectable brightness levels (100% / 75% / 50% / 25% / off)power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw max. 500 mAdimensions (W x H x D) 220 x 220 x 25 mm / 8 21/32" x 8 21/32" x 63/64"weight ca. 150 g / 0.33 lbsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B LED LIGHT V2
€29.90
*
RockBoard Mini Mounting MOD DC
· Delivery time: 3 days
Variante:
RBO B MOD MINI DC
The Mini Mounting MOD DC provides convenient access to the setup‘s multi-power supply without the need for complicated routing of the power supply cable under the pedalboard.
It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards.
The central access to the power supply is provided by a DC 2.1 x 5.5 mm barrel thru jack.
Since the Mini Mounting MOD DC uses through-connections between the inner and outer barrel jacks, it is also possible to supply power to external pedals, such as Wah, in the reverse direction.
DC power supply cables or „daisy chain“ distributors can be used instead of a multi-power supply to distribute power to the pedals. (Outputs A and B are connected in parallel).
Note: To avoid damage to the individual components, the total current consumption of all devices on the board should not exceed the output current of the connected multi-power supply or of the power adapter supplying the „daisy chain“ connections. Make sure that the voltage and polarity of the external power supply match the requirements of the multi-power supply/pedals.Mini MOD DCmounting solution for RockBoard pedalboards and power suppliesfits in the mounting hole for the RockBoard LED Light 1 x DC 2.1 x 5.5 mm barrel jack to 2 x DC 2.1 x 5.5 mm barrel jack, rated for a maximum of 3 A at 30 Vno drill holes necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm / 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 30 g / 0.07 lbsincl. mounting screws
RBO B MOD MINI DC
€14.90
*
RockBoard Mini Mounting MOD TRS
· Delivery time: 3 weeks
Variante:
RBO B MOD MINI TRS
The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket.
Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.Mini MOD TRSmounting solution for RockBoard pedalboardsfits in the mounting hole for the RockBoard LED Light1 x 6.3mm (1/4") TRS jack to 2 x 6.3 mm (1/4") TRS jackno drill holes are necessarydimensions: (W x D x H): 25 - 20 x 35 x 70 mm - 63/64"- 25/32" x 1 3/8" x 2 3/4"weight: 50 g / 0.11 lbsincl. mounting screws
RBO B MOD MINI TRS
€14.90
*
RockBoard MOD 1 V2 - All-in-One TRS & XLR, IEC & Barrel Patchbay
· Delivery time: 3 days
The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards5 x 6,3 mm / ¼" TRS thru1 x XLR thru (male front / female back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts and TX wrench
RBO B MOD 1 V2
€59.90
*
RockBoard MOD 2 V2 - All-in-One TRS, MIDI & USB Patchbay
· Delivery time: 3 days
The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards4 x 6,3 mm / ¼" TRS thru2 x 5-pin DIN MIDI thru1 x USB Type A thru1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 420 g / 0.93 lbsincl. mounting screws, counter nuts, and TX wrench
RBO B MOD 2 V2
€64.90
*
RockBoard MOD 3 V2 - All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players
· Delivery time: 3 days
The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards3 x 6,3 mm / ¼" TRS thru2 x XLR thru (male front / female back)1 x XLR thru (female front / male back)1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 450 g / 0.99 lbsincl. mounting screws, counter nuts, and TX wrench
RBO B MOD 3 V2
€69.90
*
RockBoard MOD 4 - 2.4 GHz Guitar Wireless Receiver + TRS Patchbay
· Delivery time: 3 days
Variante:
RBO B MOD 4
The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboardscompatible with XVive U2 guitar wireless system2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type A charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincl. two antennas, USB charging cable, mounting screws, and counter nuts
RBO B MOD 4
€99.90
*
RockBoard MOD 4 & Transmitter - 2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay
· Delivery time: 3 days
Variante:
RBO B MOD 4 U2
The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.wireless system receiver + patchbay for pedalboards, incl. wireless transmitter2.4 GHz ISM band for worldwide use30 m / 100 ft. approx. range (without obstacles)24-bit / 48 kHz uncompressed digital transmission20 Hz - 20 kHz frequency range5 ms latency> 103 dB dynamic range- 85 dBm RF sensitivity0.2% total harmonic distortion4 selectable channelsfits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupdetachable front plate for mounting on top or underneath pedalboards4x 6.3 mm / 1/4" stereo thru (TRS)1x 6.3 mm / 1/4" mono receiver audio output (TS)1x DC 2.1 x 5.5 mm barrel thru1x AC IEC thru1x USB Type C charge outputpower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw 500 mApassive operation possible (patchbay only, without wireless system)dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 500 g / 1.1 lbsincluding wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts
RBO B MOD 4 U2
€139.90
*
RockBoard MOD 5 - Cab SIM + DI Patchbay
· Delivery time: 3 days
The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.cabinet simulation & DI patchbayIR-based speaker cabinet simulation6 integrated IRs selectablesupport of additional Custom IRs (max. 1024 pts.)integrated active DI boxheadphone amplifierfits MOD slots in RockBoard® pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboardsselectable MONO / STEREO inputselectable UN / BALANCED outputground lift switchcontrol for Phones Volume3 x 6.3 mm / ¼" TRS thru jacks1 x XLR DI Out1 x 6.3 mm / ¼" Parallel TS output1 x 3.5 mm / 1/8" stereo headphone output with adjustable volume1 x 6.3 mm / ¼" parallel IR/DI TS inputmicro USB connection for firmware updates and loading custom IRspower supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centercurrent draw 300 mAbattery operation not supporteddimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"weight 470 g / 1.04 lbs.incl. mounting screws, counter nuts, and TX wrench
RBO B MOD 5
€129.90
*
RockBoard Pedalboard Drawer - Rotating Drawer for RockBoard Pedalboards
· Delivery time: 3 days
The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.rotating mounting drawer for RockBoard pedalboardsintelligent swivel locking mechanismfor accessories, cables, wireless systems, etc.fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3) material: reinforced polyamideincl. all mounting screws, counter nuts, and toolsdimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"weight: 150 g / 0.33 lbsblackNote: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MODROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B MOD DRAWER
€12.90
*
Skip product gallery
RockBoard CINQUE 5.3 MAX, Pedalboard with Flight Case
· Delivery time: 3 days
Variante:
RBO B 5.3 CINQ MAX C
RBO B 5.3 CINQ MAX C
€699.00
*
Bulky good
Single shipping
RockBoard QUAD 4.4, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 4.4 QUAD B
RBO B 4.4 QUAD B
€169.00
*
Single shipping
RockBoard CINQUE 5.4, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 5.4 CINQUE B
RBO B 5.4 CINQUE B
€319.00
*
Bulky good
Single shipping
RockBoard CINQUE 5.3, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 5.3 CINQUE B
RBO B 5.3 CINQUE B
€269.00
*
Single shipping
RockBoard TRES 3.3, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.3 TRES B
RBO B 3.3 TRES B
€154.00
*
RockBoard TRES 3.2, Pedalboard with Flight Case
· Delivery time: 3 days
Variante:
RBO B 3.2 TRES C
RBO B 3.2 TRES C
€194.00
*
RockBoard CINQUE 5.2, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 5.2 CINQUE B
RBO B 5.2 CINQUE B
€215.00
*
Single shipping
RockBoard QUAD 4.3, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 4.3 QUAD B
RBO B 4.3 QUAD B
€184.00
*
Single shipping
RockBoard TRES 3.2, Pedalboard with Gig Bag
· Delivery time: 3 days
Variante:
RBO B 3.2 TRES B
RBO B 3.2 TRES B
€124.00
*
Get a 4-year guarantee
Our 4 year extended warranty is available for RockBoard CINQUE 5.3 MAX, Pedalboard with Gig Bag. Double your warranty period by registering your product.
