Delivery to Germany in 3 days
Article-No.:
BA 57 J 1 L/S
Bartolini 5-String Original J-Bass (57J1 L/S), Set, Black
The original Bartolini design gives you the timeless tone that started it all - full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Available in balanced specific bridge and neck versions.
Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint.
- Original J-Bass mixed pickup set for electric bass
- 5-string version
- rich, warm, hum-free vintage tone
- suited for American Standard V J-Bass basses
- set consisting of 57J-L1 (bridge, long) and 57J-S1 (neck, short)
- split-coil, dual inline hum-killing
- magnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickups
- DC resistance bridge position 8.0 kOhm
- DC resistance neck position 7.1 kOhm
- resonant frequency bridge position 4.9 kHz
- resonant frequency neck position 5.7 kHz
- 60 - 81 mm / 2.36" - 3.19" sensing width bridge position
- 59 - 78 mm / 2.32" - 3.07" sensing width neck position
- 2-conductor, shielded coaxial cable, core hot
- passive
- black cover
- dimensions bridge position (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)
- dimensions neck position (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)
- screws and springs are not included
- Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return.
- Note: The return and refund policy does not apply to pickups if their cables have been cut or other damage affecting the condition of the goods is present.
Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint.
Login
Manufacturer
Bartolini, Inc.
Suburban Rd., Ste B2 141
93401
San Luis Obispo,
Vereinigte Staaten
Support@Bartolini.net
https://bartolini.net/
Bartolini, Inc.
Suburban Rd., Ste B2 141
93401
San Luis Obispo,
Vereinigte Staaten
Support@Bartolini.net
https://bartolini.net/
Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
General safety instructions
- Only use the pickup for its intended purpose.
- Keep the cartridge away from extreme temperatures and moisture.
- Avoid contact of the cartridge with water or other liquids.
- Keep the cartridge out of the reach of children.
- Do not use the cartridge if it is visibly damaged.
- Dispose of the cartridge in accordance with local regulations for electronic waste.
Special notes on installation dimensions
Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended to check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint.