Pickups E - Bass

Original Bass upgrade pickups provide bottomless lows and low-mids, their dual coil construction eliminates the noise and muddiness that vast amounts of low-end can create. The Originals are full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. You'll never find lower tones produced with higher clarity! Made for pro-level bass players, they are fully sealed and shielded making them sweat-proof, quiet if you touch them, and immune invisible noise from stage lights and studio power supplies. The cables are shielded too.Original Bass Vintage Gibson Les Paul pickup for electric bass4-string versiondeep, thick original tone tone for Gibson Les Paul and Flying V bassesneck positiondual parallel humbuckingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarityDC resistance 3.2 kOhm resonant frequency 4.4 kHz51 mm / 2.01" max. sensing width4-conductor shielded cable with bare drain wirepassiveblack coverdimensions (L x W x H) 70.1 x 38.9 x 22.4 mm / 2.76" x 1.53" x 0.92" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Original Bass upgrade pickups provide bottomless lows and low-mids, their dual coil construction eliminates the noise and muddiness that vast amounts of low-end can create. The Originals are full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. You'll never find lower tones produced with higher clarity! Made for pro-level bass players, they are fully sealed and shielded making them sweat-proof, quiet if you touch them, and immune invisible noise from stage lights and studio power supplies. The cables are shielded too.Original Bass Vintage Gibson Les Paul pickup for electric bass4-string versiondeep, thick original tone tone for Gibson Les Paul and Flying V bassesbridge positiondual parallel humbuckingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarityDC resistance 4.4 kOhm resonant frequency 3,7 kHz51 mm / 2.01" max. sensing width4-conductor shielded cable with bare drain wirepassiveblack coverdimensions (L x W x H) 70.1 x 38.9 x 22.4 mm / 2.76" x 1.53" x 0.92" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Classic Bass series upgrade pickups have a rich, deep voice with lots of high-end clarity and warmth. When you dig in, they are responsive and growly. When you pull back, they are clear and sweet. And they'll take any slapping and popping you want to give them. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. Without sacrificing low-end, Classic Bass pickups are sweat-proof and won't crackle and thud when you touch them or hit them with the strings. If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. There are different versions for neck and bridge so they balance well in your bass.Classic Bass Vintage Gibson Les Paul pickup for electric bass4-string versionversatile Classic Bass tone for Gibson Les Paul and Flying V bassesneck positiondual parallel humbuckingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarityDC resistance 3.1 kOhm resonant frequency 4.9 kHz51 mm / 2.01" max. sensing width4-conductor shielded cable with bare drain wirepassiveblack coverdimensions (L x W x H) 70.1 x 38.9 x 22.4 mm / 2.76" x 1.53" x 0.92" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Classic Bass series upgrade pickups have a rich, deep voice with lots of high-end clarity and warmth. When you dig in, they are responsive and growly. When you pull back, they are clear and sweet. And they'll take any slapping and popping you want to give them. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. Without sacrificing low-end, Classic Bass pickups are sweat-proof and won't crackle and thud when you touch them or hit them with the strings. If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. There are different versions for neck and bridge so they balance well in your bass.Classic Bass Vintage Gibson Les Paul pickup for electric bass4-string versionversatile Classic Bass tone for Gibson Les Paul and Flying V bassesbridge positiondual parallel humbuckingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite coil polarityDC resistance 4.3 kOhm resonant frequency 4.5 kHz51 mm / 2.01" max. sensing width4-conductor shielded cable with bare drain wirepassiveblack coverdimensions (L x W x H) 70.1 x 38.9 x 22.4 mm / 2.76" x 1.53" x 0.92" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Based on our legendary Original series J-Bass pickups with dual-inline, split coils, these pickups cancel hum while providing that full and warm vintage tone you've been craving, enhancing the natural voice of your bass. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups.Original G6 Candybar pickup for electric bass6-string versiondeep voiced and hum-cancellingclassic 90s design with input from Steve Baileyneck positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for neck and bridge pickupsDC resistance 8.8 kOhmresonant frequency 5.8 kHz65 - 100 mm / 2.56" - 3.94" sensing width2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 140.2 x 23.7 x 24.1 mm / 5.52" x 0.93" x 0.95" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Based on our legendary Original series J-Bass pickups with dual-inline, split coils, these pickups cancel hum while providing that full and warm vintage tone you've been craving, enhancing the natural voice of your bass. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups.Original G6 Candybar pickup set for electric bass6-string versiondeep voiced and hum-cancellingclassic 90s design with input from Steve Bailey split-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for neck and bridge pickupsDC resistance bridge position 10 kOhmDC resistance neck position 8.8 kOhmresonant frequency bridge position 4.9 kHzresonant frequency neck position 5.8 kHz65 - 100 mm / 2.56" - 3.94" sensing width2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 140.2 x 23.7 x 24.1 mm / 5.52" x 0.93" x 0.95" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Based on our legendary Original series J-Bass pickups with dual-inline, split coils, these pickups cancel hum while providing that full and warm vintage tone you've been craving, enhancing the natural voice of your bass. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups.Original G6 Candybar pickup for electric bass6-string versiondeep voiced and hum-cancellingclassic 90s design with input from Steve Baileybridge positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for neck and bridge pickupsDC resistance 10 kOhmresonant frequency 4.9 kHz65 - 100 mm / 2.56" - 3.94" sensing width2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 140.2 x 23.7 x 24.1 mm / 5.52" x 0.93" x 0.95" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Based on our legendary Original series J-Bass pickups with dual-inline, split coils, these pickups cancel hum while providing that full and warm vintage tone you've been craving, enhancing the natural voice of your bass. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups.Original G6 Candybar pickup for electric bass7-string versiondeep voiced and hum-cancellingclassic 90s design with input from Bill Dickensneck positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for neck and bridge pickupsDC resistance 9.8 kOhmresonant frequency 5.8 kHz72 - 108 mm / 2.83" - 4.25" sensing width2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 140.2 x 23.7 x 24.1 mm / 5.52" x 0.93" x 0.95" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Based on our legendary Original series J-Bass pickups with dual-inline, split coils, these pickups cancel hum while providing that full and warm vintage tone you've been craving, enhancing the natural voice of your bass. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups.Original G6 Candybar pickup set for electric bass7-string versiondeep voiced and hum-cancellingclassic 90s design with input from Bill Dickenssplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for neck and bridge pickupsDC resistance bridge position 11.1 kOhmDC resistance neck position 9.8 kOhmresonant frequency bridge position 4.9 kHzresonant frequency neck position 5.8 kHz72 - 108 mm / 2.83" - 4.25" sensing width2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 140.2 x 23.7 x 24.1 mm / 5.52" x 0.93" x 0.95" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Based on our legendary Original series J-Bass pickups with dual-inline, split coils, these pickups cancel hum while providing that full and warm vintage tone you've been craving, enhancing the natural voice of your bass. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Candybar shapes were made for refined Jazz bass builders who wanted to avoid the routing hassles and busy look of standard J-Bass pickups.Original G6 Candybar pickup for electric bass7-string versiondeep voiced and hum-cancellingclassic 90s design with input from Bill Dickensbridge positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for neck and bridge pickupsDC resistance 11.1 kOhmresonant frequency 4.9 kHz72 - 108 mm / 2.83" - 4.25" sensing width2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 140.2 x 23.7 x 24.1 mm / 5.52" x 0.93" x 0.95" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Classic J-Bass pickups give you enhanced treble response and narrower apertures for incisive attack and focused sound without harshness. This added treble definition vastly increases the tonal range available in active or passive instruments. When you dig in, they are responsive and growly. When you pull back, they are clear and sweet. And they'll take any slapping and popping you want to give them. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. They are sweat-proof and won't crackle and thud when you touch them or hit them with the strings. If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. These dual inline-coil pickups are hum-cancelling even soloing the neck or bridge pickup, so they are well suited for studio or stage. Available in balanced bridge and neck versions.Classic J-Bass pickup for electric bass5-string versionrich, deep, warm, hum-free voice with high-end claritysuited for American Standard and Deluxe V J-Bass bassesbridge positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance 10.5 kOhmresonant frequency 4.4 kHz60 - 81 mm / 2.36" - 3.19" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Classic J-Bass pickups give you enhanced treble response and narrower apertures for incisive attack and focused sound without harshness. This added treble definition vastly increases the tonal range available in active or passive instruments. When you dig in, they are responsive and growly. When you pull back, they are clear and sweet. And they'll take any slapping and popping you want to give them. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. They are sweat-proof and won't crackle and thud when you touch them or hit them with the strings. If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. These dual inline-coil pickups are hum-cancelling even soloing the neck or bridge pickup, so they are well suited for studio or stage. Available in balanced bridge and neck versions.Classic J-Bass pickup set for electric bass5-string versionrich, deep, warm, hum-free voice with high-end claritysuited for American Standard and Deluxe V J-Bass bassessplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance bridge position 10.5 kOhmDC resistance neck position 9.3 kOhmresonant frequency bridge position 4.4 kHzresonant frequency neck position 5.2 kHz60 - 81 mm / 2.36" - 3.19" sensing width bridge position59 - 78 mm / 2.32" - 3.07" sensing width neck position2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions bridge position (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)dimensions neck position (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Classic J-Bass pickups give you enhanced treble response and narrower apertures for incisive attack and focused sound without harshness. This added treble definition vastly increases the tonal range available in active or passive instruments. When you dig in, they are responsive and growly. When you pull back, they are clear and sweet. And they'll take any slapping and popping you want to give them. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. They are sweat-proof and won't crackle and thud when you touch them or hit them with the strings. If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. These dual inline-coil pickups are hum-cancelling even soloing the neck or bridge pickup, so they are well suited for studio or stage. Available in balanced bridge and neck versions.Classic J-Bass pickup for electric bass5-string versionrich, deep, warm, hum-free voice with high-end claritysuited for American Standard and Deluxe V J-Bass bassesneck positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance 9.3 kOhmresonant frequency 5.2 kHz59 - 78 mm / 2.32" - 3.07" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Bright Classic J-Bass pickups give you extra-enhanced treble response and narrower apertures for incisive attack and focused sound without harshness. This added treble definition vastly increases the tonal range available in active or passive instruments. When you dig in, they are responsive and full. When you pull back, they are clear and crisp. And they'll take any slapping and popping you want to give them and deliver snappy ring. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. They are sweat-proof and won't crackle and thud when you touch them or hit them with the strings.If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. They work very well with an onboard-preamp. These dual inline-coil pickups are hum-cancelling even soloing the neck or bridge pickup, so they are well suited for studio or stage. Available in balanced bridge and neck versions.Classic Bright Tone J-Bass pickup for electric bass5-string versiondefined, bright yet warm, hum-free voice with high-end claritysuited for American Standard and Deluxe V J-Bass bassesbridge positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance 7.9 kOhmresonant frequency 6.4 kHz60 - 81 mm / 2.36" - 3.19" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Bright Classic J-Bass pickups give you extra-enhanced treble response and narrower apertures for incisive attack and focused sound without harshness. This added treble definition vastly increases the tonal range available in active or passive instruments. When you dig in, they are responsive and full. When you pull back, they are clear and crisp. And they'll take any slapping and popping you want to give them and deliver snappy ring. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. They are sweat-proof and won't crackle and thud when you touch them or hit them with the strings.If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. They work very well with an onboard-preamp. These dual inline-coil pickups are hum-cancelling even soloing the neck or bridge pickup, so they are well suited for studio or stage. Available in balanced bridge and neck versions.Classic Bright Tone J-Bass pickup set for electric bass5-string versiondefined, bright yet warm, hum-free voice with high-end claritysuited for American Standard and Deluxe V J-Bass bassessplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance bridge position 7.9 kOhmDC resistance neck position 7.0 kOhmresonant frequency bridge position 6.4 kHzresonant frequency neck position 6.3 kHz60 - 81 mm / 2.36" - 3.19" sensing width bridge position59 - 78 mm / 2.32" - 3.07" sensing width neck position2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions bridge position (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)dimensions neck position (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Bright Classic J-Bass pickups give you extra-enhanced treble response and narrower apertures for incisive attack and focused sound without harshness. This added treble definition vastly increases the tonal range available in active or passive instruments. When you dig in, they are responsive and full. When you pull back, they are clear and crisp. And they'll take any slapping and popping you want to give them and deliver snappy ring. The Classic Bass series is popular with progressive, jazz, gospel, and metal musicians where articulation is critical. They are sweat-proof and won't crackle and thud when you touch them or hit them with the strings.If you play a wide variety of music, you know you need some pro-level pickups, but you don't want to do a big upgrade project, Classic Bass pickups are a great choice. They are passive and will work with your current electronics in most basses. They work very well with an onboard-preamp. These dual inline-coil pickups are hum-cancelling even soloing the neck or bridge pickup, so they are well suited for studio or stage. Available in balanced bridge and neck versions.Classic Bright Tone J-Bass pickup for electric bass5-string versiondefined, bright yet warm, hum-free voice with high-end claritysuited for American Standard and Deluxe V J-Bass bassesneck positionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance 7.0 kOhmresonant frequency 6.3 kHz59 - 78 mm / 2.32" - 3.07" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

The original Bartolini design gives you the timeless tone that started it all - full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Available in balanced specific bridge and neck versions.Original J-Bass long pickup set for electric bass5-string versionrich, warm, hum-free vintage tonesuited for American Standard V J-Bass bassesset consisting of 57J-L1 (bridge) and 57J-LN1 (neck), long versionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance bridge position 8.0 kOhmDC resistance neck position 7.3 kOhmresonant frequency bridge position 4.9 kHzresonant frequency neck position 5.7 kHz60 - 81 mm / 2.36" - 3.19" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

The original Bartolini design gives you the timeless tone that started it all - full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Available in balanced specific bridge and neck versions.Original J-Bass mixed pickup set for electric bass5-string versionrich, warm, hum-free vintage tonesuited for American Standard V J-Bass bassesset consisting of 57J-L1 (bridge, long) and 57J-S1 (neck, short)split-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance bridge position 8.0 kOhmDC resistance neck position 7.1 kOhmresonant frequency bridge position 4.9 kHzresonant frequency neck position 5.7 kHz60 - 81 mm / 2.36" - 3.19" sensing width bridge position59 - 78 mm / 2.32" - 3.07" sensing width neck position2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions bridge position (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)dimensions neck position (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

The original Bartolini design gives you the timeless tone that started it all - full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Available in balanced specific bridge and neck versions.Original J-Bass short pickup set for electric bass5-string versionrich, warm, hum-free vintage tonesuited for American Standard V J-Bass bassesset consisting of 57J-SB1 (bridge) and 57J-S1 (neck), short versionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance bridge position 7.7 kOhmDC resistance neck position 7.1 kOhmresonant frequency bridge position 4.9 kHzresonant frequency neck position 5.7 kHz59 - 78 mm / 2.32" - 3.07" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

The original Bartolini design gives you the timeless tone that started it all - full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Available in balanced specific bridge and neck versions.Original J-Bass long pickup for electric bass5-string versionrich, warm, hum-free vintage tonesuited for American Standard V J-Bass bassesbridge position, long versionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance 8.0 kOhmresonant frequency 4.9 kHz60 - 81 mm / 2.36" - 3.19" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

The original Bartolini design gives you the timeless tone that started it all - full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Available in balanced specific bridge and neck versions.Original J-Bass long pickup for electric bass5-string versionrich, warm, hum-free vintage tonesuited for American Standard V J-Bass bassesneck position, long versionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance 7.3 kOhmresonant frequency 5.7 kHz60 - 81 mm / 2.36" - 3.19" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 105.2 x 19.6 x 23.9 mm / 4.14" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

The original Bartolini design gives you the timeless tone that started it all - full and warm for that vintage voice you've been craving, enhancing the natural voice of your bass. These dual coil inline pickups are hum-cancelling even when only playing the neck or bridge pickup, so they are well suited for studio or stage. They have a blade core design, so you don't have to worry about string alignment. Original Barts bring out your voice, low and clear. In the early '70s, Bill Bartolini leveraged his deep knowledge of acoustics to create pickups that produce the most natural, musical voice from the instrument. He added shielding to block radio signals and noise. He developed a method of sealing, isolating, and stabilizing the coils so they could be encapsulated in epoxy to eliminate "microphonics" - the nasty noise you get when you touch typical pickups. Available in balanced specific bridge and neck versions.Original J-Bass pickup for electric bass5-string versionrich, warm, hum-free vintage tonesuited for American Standard V J-Bass bassesHalsposition position, short versionsplit-coil, dual inline hum-killingmagnetic circuit: carbon steel, ceramic blade magnets (ferrite), opposite polarity for bass and treble coils for neck and bridge pickupsDC resistance 7.1 kOhmresonant frequency 5.7 kHz59 -78 mm / 2.32" - 3.07" sensing width 2-conductor, shielded coaxial cable, core hotpassiveblack coverdimensions (L x W x H) 101.6 x 19.6 x 23.9 mm / 4.0" x 0.77" x 0.94" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.