Unleash the power of your Wavelength™ Solo under-saddle transducer with the Wavelength – Volume & Tone Module. This module puts the control of your volume level and tone-shaping right at your fingertips. A short cable connects the module to the Wavelength Solo endpin preamp, then it’s just a matter of mounting the unit to the inside of your guitar’s soundhole with an adhesive strip. No soldering or alteration to your instrument needed!
Not only do you now have control of the volume and overall tone of your guitar, but there’s also no loss of tone or dampening of vibrations caused by batteries and electronics being attached to a side-mounted pre-amp assembly. This module is only for use with the Wavelength Solo: it is not compatible with the Wavelength Duo.Volume & Tone module for acoustic guitars with Wavelength Under-Saddle Transducercan be used with Wavelength Solo endpin preamp (not compatible with Wavelength Duo)for mounting on the inside of the soundholecontrols for volume, tone2 conductor cable with 3.5 mm jack plugNote: The right and refund policy does not apply to electronic components if their cables have been cut or soldered, if they show signs of use, if they have already been installed or other damage affecting the condition of the goods is present.Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint.
Ghost saddles for J- and P- style 4-string bass guitarmanufactured from custom engineered piezo crystalsimpregnated with PTFEincreased harmonic contentnatural compression effectspacing E to G 56.80 mm ( 2 1/4")dimensions (L x W x H) 18.97 mm x 8.51 mm x 8.51 mm (3/4" x 11/32" x 11/32")1 set of 4 pieces
Ghost saddles for 5-string J- and P- style bass guitarsmanufactured from custom engineered piezo crystalsimpregnated with PTFEincreased harmonic contentnatural compression effectspacing B to G 63.50 mm ( 2 7/32")dimensions (L x W x H) 18.97 mm x 8.51 mm x 8.51 mm (3/4" x 11/32" x 11/32")set of 5 pieces
replacement part for ST and TE style guitars6 saddles with integrated Ghost piezo acoustic pickupsTeflon coated 52.4 mm (2 1/16") spacingeach set comes with longer intonation screws for modern TE style guitars
Ghost saddle for 4-string J- and P- style bass guitarsmanufactured from custom engineered piezo crystalsimpregnated with PTFEincreased harmonic contentnatural compression effectsingle unit
replacement part for 7-string ST and TE style guitars7 saddles with integrated Ghost piezo acoustic pickupsTeflon coated 61.9 mm (2 7/16") spacingeach set comes with longer intonation screws for modern TE style guitars
Ghost saddles for 5-string J- and P- style bass guitarmanufactured from custom engineered piezo crystalsimpregnated with PTFEincreased harmonic contentnatural compression effect1 set of 5 pieces
Our legendary 3AV Hum-Killer Acoustic Guitar Soundhole pickup provides an incredibly natural sounding acoustic voice, bright and clear with B-string compensation and a 10-foot cable. It now features a new, easy to install, clean look mounting bracket.Soundhole pickup for acoustic guitargreat natural soundeasy to installstacked coil, hum-killingmagnetic circuit: carbon steel, brass, copper, ceramic blade magnets (ferrite), focused aperture, B-string mass compensationDC resistance 2.8 kOhmresonant frequency 9.2 kHz55 mm / 2.17" max. sensing width3m / 10 ft, 2-conductor, shielded coaxial cable, 6.35 mm / 1/4" plug passiveblack coverdimensions (L x W x H) 69.9 x 17.5 x 22.6 mm / 2.75" x 0.69" x 0.88" (height incl. cable)fits 89 to 114 mm / 3.5" to 4.5" soundholes (bridge side)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.
replacement part for ST and TE style guitars6 saddles with integrated Ghost piezo acoustic pickupsTeflon coated 55.6 mm (2 3/16") spacingeach set comes with longer intonation screws for modern TE style guitars
Ghost saddles for 6-string J- and P- style bass guitarmanufactured from custom engineered piezo crystalsimpregnated with PTFEincreased harmonic contentnatural compression effectspacing B to C 76.20 mm ( 3")dimensions (L x W x H) 15.34 mm x 8.57 mm x 8.56 mm (19/32" x 11/32" x 11/32")set of 6 pieces
The MPB2-918 is a dual channel buffer preamp. One channel has a high impedance input for use with a piezo or microphonic transducer. The other channel provides isolation and boost for magnetic pickups and features adjustable gain allowing you to boost the input signal up to 12dB (4X) while maintaining flat frequency response. It is less than ½ the size of a 9-volt battery making it ideal for instruments with limited cavity space. The MPB2-918 provides a strong output signal and isolation from external equipment that may otherwise adversely affect pickup tone. The kit includes a blend pot for mixing the magnetic and piezo signals into a common output for connection to an EQ preamp or direct to the jack. The MPB2-918 is ideal for providing excellent tone from an instrument with 2 magnetic pickups and a piezo bridge pickup. Both channels deliver clear and transparent sound with extremely low distortion. Like all of our preamps, the MPB2-918 is internally shielded to reject electromagnetic noise and includes internal filters to block AM and FM radio on the inputs. Bartolini set the standard of fully sealing the sensitive electronics. We use professional double tin plated pure copper wire with durable semi-rigid insulation. This ensures the 4 pre-stripped wires dont flop around in the cavity and the wires dont cut through the insulation over time. It can be used with either a single 9-volt battery (9-volt operation) or two 9-volt batteries wired in series (18-volt operation) for double the (6dB extra) headroom with no tonal change.dual channel buffer preamp for guitarstrong output signal with isolation from external noisesuitable for combination of Piezo pickups and magnetic pickupsflat response for the Piezo channeladjustable gain for the magnetic channel up to 12 dBinput impedance magnetic channel 1 MOhminput impedance Piezo channel 3.3 MOhmsupports 18V operation for 6 dB extra headroom power supply via 1 x 9V / 2 x 9V (18V) battery (not included)dimensions (L x W x H) 26.7 x 20.1 x 10.9 mm / 1.05" x 0.79" x 0.43"incl. 25 kOhm blend potWarranty Information for Electronics: Electronic components such as preamps and circuit boards by Sadowsky, MEC, Seymour Duncan, and Bartolini are covered exclusively by the legal warranty period. These items are classified as electronic wear parts and are therefore excluded from the extended 4-year warranty. Thank you for your understanding. Note: Electronic components are excluded from the right of return if their cables have been cut or soldered, if they show signs of use, if they have already been installed, or if there is other damage that affects the condition of the goods.
replacement part for ST and TE style guitars6 saddles with integrated Ghost piezo acoustic pickupsTeflon coated offset intonation screwseach set comes with longer intonation screws for modern TE style guitars
replacement part for lefthand ST and TE style guitars6 saddles with integrated Ghost piezo acoustic pickupsTeflon coated offset intonation screws55.6 mm (2 3/16") spacingeach set comes with longer intonation screws for modern TE style guitars
replacement part for ST Elite style guitarslefthand version6 saddles with integrated Ghost piezo acoustic pickupsTeflon coated offset intonation screws
replacement part for Vintage TE style guitars3 barrel saddles with integrated Ghost piezo acoustic pickupscompensated for better intonationslightly longer intonation screws included
passive Piezo pickup for acoustic instrumentssuitable for acoustic guitars and many other types of acoustic instrumentsdynamic and natural sounding amplificationmaple housingeasy to attach and remove without leaving residues thanks to self-adhesive surfaceincl. connecting cableMade in USA
DMS APU 3000
€39.90
*
· Delivery time: 3 days
This website uses cookies to ensure the best experience possible. More information...
