Black TUSQ XL nut for 4-string Ubassright-hand versionfor flat-wound stringsmanufactured from Black TUSQslottedflat bottomimpregnated with PTFE to reduce string breakage and improve tuning stabilitybalanced tone, increased harmonicsblackdimensions (L x W x H): 45.05 x 5.9 x 11.85 mm (1.774" x 0.232" x 0.467")1 pieceNote: All GraphTech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper.
This Sadowsky Just-A-Nut III is an adjustable nut for right-hand 6-string electric bass guitars with a 2.11" (53.5 mm) nut width. Made of white Tedur, it fits both fretted and fretless basses. Total width is 2.125" (54 mm). The height can be adjusted from approx. 0.15" to 0.21" / 3.8 - 5.5 mm (measured inside the slot). Delivered with the top, base plate and a 0.9 mm Hex Key Wrench.Just-A-Nut IIIadjustable nut for electric bass guitars with 2.11" (53.5 mm) nut width6-string versionfits fretted and fretless bassesmade of white Tedur2.125" (54 mm) widthheight adjustable from approx. 0.15" - 0.21" (3.8 - 5.5 mm), (measured inside the slot)height adjustable via Allen screwsincludes top, base plate and 0.9 mm Allen wrench-Note: To ensure a precise fit to your instrument, the saddle width and height may need to be adjusted by sanding. To preserve upwards/downwards adjustability, the height should not be reduced by more than 1 mm.
nut for 4-string bassmanufactured from Nuboneslottedflat bottomconsistent qualityincreased harmonic contentivory whitespacing E to G 31.09 mm / 1 7/32"dimensions (L x W x H) 41.02 mm x 4.62 mm x 8.84 mm / 1 5/8 " x 3/16" x 11/32"luthier’s pack10 piecesNote: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper
Framus Just-A-NutWebster guitar nutindividually adjustable nut action for each string6-stringmade of brassstring spacing 7.2 mm / 5/16"42,8 mm / 1 11/16" width5 mm depthheight adjustable from approx. 5.6 - 7.6 mm / 7/32" - 10/32" (measured inside of slot)suitable also for left-handed instruments (order of slot screws has to be reversed)
nut for 4-string F-style, P- style bassmanufactured from Nuboneslottedcurved bottomconsistent qualityincreased harmonic contentivory whitespacing E to G 31.75 mm / 1 1/4"dimensions (L x W x H) 41.91 mm x 3.17 mm x 31.75 mm / 1 21/32" x 1/8" x 3/16"luthier’s pack10 piecesNote: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper.
nut for 4-string F-style, J-style bassmanufactured from Nuboneslottedcurved bottomconsistent qualityincreased harmonic contentivory whitespacing E to G 31.06 mm / 1 7/32"dimensions (L x W x H) 39.47 mm x 3.25 mm x 4.75 mm / 1 9/16" x 1/8" x 3/16"luthier’s pack10 piecesNote: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper
Warwick Just-A-Nutbass guitar nut with individually adjustable nut action for each string4-stringsuitable for fretted and fretless bassesmade of brass38.5 mm / 1 1/2" width5 mm depthheight adjustable from approx. 5.6 - 7.6 mm / 7/32" - 10/32" (measured inside of slot)suitable also for left-handed instruments (order of slot screws has to be reversed)
Warwick Just-A-Nutbass guitar nut with individually adjustable nut action for each string4-stringsuitable for fretted and fretless bassesmade of brass40.5 mm / 1 9/16" width5 mm depthheight adjustable from approx. 5.6 - 7.6 mm / 7/32" - 10/32" (measured inside of slot)suitable also for left-handed instruments (order of slot screws has to be reversed)
Warwick Just-A-Nutbass guitar nut with individually adjustable nut action for each string4-stringsuitable for fretted and fretless bassesmade of brass44 mm / 1 3/4" width5 mm depthheight adjustable from approx. 5.6 - 7.6 mm / 7/32" - 10/32" (measured inside of slot)suitable also for left-handed instruments (order of slot screws has to be reversed)
Just A Nut, brass, 38.5mmWarwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut4-stringlefthand versionsuitable for fretted and fretless bassesmade of brass38.5 mm / 1 1/2" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: All Just-A-Nut III models made of brass are manufactured with a 2.5 mm high bottom plate in order to fit both fretless and fretted instruments. Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut4-stringsuitable for fretted and fretless bassesmade of brass38.5 mm / 1 1/2" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: All Just-A-Nut III models made of brass are manufactured with a 2.5 mm high bottom plate in order to fit both fretless and fretted instruments. Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
The Warwick Parts Just-A-Nut III is made from the new material Tedur - break-proof, stable and with ideal vibration characteristics in all frequency ranges. The nut includes two parts, a base plate firmly glued to the neck and an upper part with accordant notching, height adjustable with screw mechanism. Exact guiding is guaranteed by two solid notches. The Just-A-Nut III offers optimal playing comfort without sharp-edged nut-flanks.Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut4-string versionlefthand versionsuitable fretted and fretless bassesmade of Tedur38.5 mm / 1 1/2" width7 mm depthheight adjustable via hex key screwsadjustable from approx. 5.8 - 8.2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
The Warwick Parts Just-A-Nut III is made from the new material Tedur - break-proof, stable and with ideal vibration characteristics in all frequency ranges. The nut includes two parts, a base plate firmly glued to the neck and an upper part with accordant notching, height adjustable with screw mechanism. Exact guiding is guaranteed by two solid notches. The Just-A-Nut III offers optimal playing comfort without sharp-edged nut-flanks.Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut4-string versionsuitable fretted and fretless bassesmade of Tedur38.5 mm / 1 1/2" width7 mm depthheight adjustable via hex key screwsadjustable from approx. 5.8 - 8.2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
jumbo XL nut for any stringed instrument manufactured from NuBoneblankflat bottomconsistent qualityincreased harmonic contentivory whitedimensions (L x W x H) 48.39 mm x 4.88 mm x 9.52 mm / 1 29/32" x 3/16" x 3/8"luthier’s pack10 pieces Note: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper.
nut for 4-string bassmanufactured from TUSQslottedflat bottomconsistent qualityincreased harmonic contentivory whitespacing E to G 31.09 mm / 1 7/32"dimensions (L x W x H) 41.02 mm x 4.62 mm x 31.09 mm / 1 5/8" x 3/16" x 11/32"luthier’s pack10 pieces Note: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper.
Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut8-stringlefthand versionsuitable for fretted and fretless bassesmade of brass38.5 mm / 1 1/2" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: All Just-A-Nut III models made of brass are manufactured with a 2.5 mm high bottom plate in order to fit both fretless and fretted instruments. Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut8-stringsuitable for fretted and fretless bassesmade of brass38.5 mm / 1 1/2" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: All Just-A-Nut III models made of brass are manufactured with a 2.5 mm high bottom plate in order to fit both fretless and fretted instruments. Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
The Warwick Parts Just-A-Nut III is made from the new material Tedur - break-proof, stable and with ideal vibration characteristics in all frequency ranges. The nut includes two parts, a base plate firmly glued to the neck and an upper part with accordant notching, height adjustable with screw mechanism. Exact guiding is guaranteed by two solid notches. The Just-A-Nut III offers optimal playing comfort without sharp-edged nut-flanks.Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut8-string versionlefthand versionsuitable fretted and fretless bassesmade of Tedur38.5 mm / 1 1/2" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8.2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
The Warwick Parts Just-A-Nut III is made from the new material Tedur - break-proof, stable and with ideal vibration characteristics in all frequency ranges. The nut includes two parts, a base plate firmly glued to the neck and an upper part with accordant notching, height adjustable with screw mechanism. Exact guiding is guaranteed by two solid notches. The Just-A-Nut III offers optimal playing comfort without sharp-edged nut-flanks.Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut8-string versionsuitable fretted and fretless bassesmade of Tedur38.5 mm / 1 1/2" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
nut for 4-string F-style P- style bassmanufactured from TUSQslottedcurved bottomconsistent qualityincreased harmonic contentivory whitespacing E to G 31.75 mm / 1 1/4"dimensions (L x W x H) 41.91 mm x 3.17 mm x 4.75 mm / 1 21/32" x 1/8" x 1 1/4"luthier’s pack10 pieces Note: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper.
Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut4-stringlefthand versionsuitable for fretted and fretless bassesmade of brass36.5 mm / 1 7/16" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: All Just-A-Nut III models made of brass are manufactured with a 2.5 mm high bottom plate in order to fit both fretless and fretted instruments. Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut4-stringsuitable for fretted and fretless bassesmade of brass36.5 mm / 1 7/16" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: All Just-A-Nut III models made of brass are manufactured with a 2.5 mm high bottom plate in order to fit both fretless and fretted instruments. Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
nut for 4-string F-style J- style bassmanufactured from TUSQslottedcurved bottomconsistent qualityincreased harmonic contentivory whitespacing E to G 31.06 mm / 1 7/32"dimensions (L x W x H) 39.47 mm x 3.25 mm x 4.75 mm / 1 9/16" x 1/8" x 3/16"luthier’s pack10 pieces Note: All Graph Tech nuts and saddles are slightly long and wide to ensure extra room to achieve a perfect fit for your guitar. This extra material can easily be removed with fine grit sandpaper.
Warwick Just-A-Nut IIIdrop-in replacement for Warwick Just-A-Nut IIadjustable bass guitar nut5-stringlefthand versionsuitable for fretted and fretless bassesmade of brass45 mm / 1 3/4" width7 mm depthheight adjustable by via hex key screwsadjustable from approx. 5.8 - 8,2 mm / 15/64" - 21/64" (measured inside of slot)incl. 1.5 mm hex key wrenchNOTE: All Just-A-Nut III models made of brass are manufactured with a 2.5 mm high bottom plate in order to fit both fretless and fretted instruments. Should the nut be too high for your instrument, the height of the bottom plate can be sanded down to allow for up and downwards adjustability.
SP W 30215 III TLH
€119.00
*
· Delivery time: 3 days
This website uses cookies to ensure the best experience possible. More information...
