This replacement rechargeable battery is suitable for GTRS Intelligent electric guitars and ensures your instrument stays powered during long shows or recording sessions. With high quality construction and direct compatibility with the guitar's built-in charging function, your GTRS Intelligent electric guitar remains ready to play at all times.replacement and spare rechargeable battery for GTRS Intelligent electric guitarsquick replacement for long shows and recording sessionsprovides up to 10 hours of battery life per charge (15 hours standby time)can only be charged via the built-in charging function of the Mooer GTRS Guitars (external charging is not possible)4,000 mAh / 3.8 VNote: A 6-month warranty is provided for batteries. This warranty covers defects due to faulty materials or workmanship that occur during normal use.
Replacement circuit board for the UHF wireless transmitter of the G150 Intelligent Process System. The board allows for solder‑free installation and ensures reliable signal transmission. Mounting screws are not included.replacement circuit board for the UHF wireless transmitter of the G150 Intelligent Process Systemfor internal installation within the G150 Intelligent Process Systemsoldering not requiredmounting screws not included
This Wilkinson VS 50 II tremolo system is a direct replacement part for the GTRS P800 and P801 Intelligent electric guitars, exactly as installed at the factory. It provides precise control over pitch changes and ensures reliable performance and stability.direct replacement Wilkinson VS 50 II tremolo system for GTRS P800 and P801 Intelligent electric guitarsstainless steel saddleschrome finishincl. mounting studs with body inserts, springs, spring clip with screws, tremolo arm and adjustment wrenches
This GTRS 2-point tremolo system is a direct replacement part for the GTRS S800 and S801 Intelligent electric guitars, exactly as installed at the factory. It provides precise control over pitch changes and ensures reliable performance and stability.direct replacement GTRS 2-point tremolo system for the GTRS S800 and S801 Intelligent electric guitarschrome finishincl. mounting studs with body inserts, springs, spring clip with screws, tremolo arm and adjustment wrenches
This UHF wireless receiver is suitable for GTRS 900 Series Intelligent electric guitars as well as the GWU4 wireless system and allows cable free playing with low latency. It features a rechargeable battery, USB charging port and status indicators for channel and battery level. Ideal for guitarists who value convenient wireless playing and reliable performance.UHF wireless receiversuitable for the GTRS 900 Series Intelligent electric guitars and GWU4 Wireless Systemrechargeable 800 mAh battery for long battery liferange up to 98 ft / 30 m (without obstacles)less than 0.3 ms latencyfrequency range 20 - 20.000 Hz103 dB dynamic rangeruns up to 6 hours per battery charge (2.5 hrs for a full charge)On/Off switchchannel switchstatus LED shows selected channel and indicates battery levelUSB Type-C connectorincl. USB Type-A to USB Type-C charging cabledimensions (L x W x H) 7.48" x 1.18" x 0.79" / 190 x 30 x 20 mmblackNote: A 6-month warranty is provided for the battery built into the device. This warranty covers defects due to faulty materials or workmanship that occur during normal use.
This internal compartment is suitable for GTRS Intelligent electric guitars and designed to hold the rechargeable battery and GTRS Intelligent Process Module. Made of durable plastic, it ensures secure placement and protection of the electronic components. A practical replacement part for maintaining or repairing your GTRS Intelligent guitar.interior compartment for GTRS Intelligent electric guitarsfits the rechargeable battery and GTRS Intelligent Process moduledimensions (L x W x H) 4.19" x 3.54" x 0.98" / 106.5 x 90 x 25 mmblackmade of plasticbattery connection terminals
This loaded pickguard is a direct replacement part for the GTRS P800 and P801 Intelligent electric guitars, exactly as installed at the factory. It is also compatible with the S800, S801, and S900 models. The pickguard comes fully pre-loaded and pre-wired, including pickups, controls for volume, tone, and the Super-Knob, as well as a 5-way selector switch for pickup selection. The HSS configuration with high quality pickups delivers clear, powerful tone. The neck and middle pickups are hum-canceling, and the bridge humbucker is not coil-splittable. The pickguard is made of durable material, features 11 screw holes, and allows for easy installation as a reliable replacement part.direct replacement pre-loaded pickguard for GTRS P800 and P801 Intelligent electric guitarscompatible with S800, S801 and S900 modelsincl. original HSS pickupsGTRS SCN-1N single coil (neck) hum-cancelingGTRS SCN-1M single coil (middle) hum-cancelingGTRS HM-1B Alnico V humbucker (bridge, not coil-splittable)controls for volume, tone, Super-Knob (main output / preset control)5-way selector switch for pickup selection11 screw holesblackNote: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.
This loaded pickguard is a direct replacement part for the GTRS P800 and P801 Intelligent electric guitars, exactly as installed at the factory. It is also compatible with the S800, S801, and S900 models. The pickguard comes fully pre-loaded and pre-wired, including pickups, controls for volume, tone, and the Super-Knob, as well as a 5-way selector switch for pickup selection. The HSS configuration with high quality pickups delivers clear, powerful tone. The neck and middle pickups are hum-canceling, and the bridge humbucker is not coil-splittable. The pickguard is made of durable material, features 11 screw holes, and allows for easy installation as a reliable replacement part.direct replacement pre-loaded pickguard for GTRS P800 and P801 Intelligent electric guitarscompatible with S800, S801 and S900 modelsincl. original HSS pickupsGTRS SCN-1N single coil (neck) hum-cancelingGTRS SCN-1M single coil (middle) hum-cancelingGTRS HM-1B Alnico V humbucker (bridge, not coil-splittable)controls for volume, tone, Super-Knob (main output / preset control)5-way selector switch for pickup selection11 screw holesOff-White (cream)Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.
This loaded pickguard is a direct replacement part for the GTRS S800 and S801 Intelligent electric guitars, exactly as installed at the factory. It is also compatible with the S900, P800, and P801 models. The pickguard comes fully pre-loaded and pre-wired, including pickups, controls for volume, tone, and the Super-Knob, as well as a 5-way selector switch for pickup selection. The HSS configuration with high quality pickups delivers clear, powerful tone. The neck and middle pickups are single coil, and the bridge humbucker is not coil-splittable. The pickguard is made of durable material, features 11 screw holes, and allows for easy installation as a reliable replacement part.direct replacement pre-loaded pickguard for GTRS S800 and S801 Intelligent electric guitarscompatible with S900, P800 and P801 modelsincl. original HSS pickupsGTRS SC-1N single coil (neck)GTRS SC-1M single coil (middle)GTRS HM-1B humbucker with metal cover (bridge, not coil-splittable)Alnico V magnetscontrols for volume, tone, Super-Knob (main output / preset control)5-way selector switch for pickup selection11 screw holesmint greenNote: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.
This loaded pickguard is a direct replacement part for the GTRS S800 and S801 Intelligent electric guitars, exactly as installed at the factory. It is also compatible with the S900, P800, and P801 models. The pickguard comes fully pre-loaded and pre-wired, including pickups, controls for volume, tone, and the Super-Knob, as well as a 5-way selector switch for pickup selection. The HSS configuration with high quality pickups delivers clear, powerful tone. The neck and middle pickups are single coil, and the bridge humbucker is not coil-splittable. The pickguard is made of durable material, features 11 screw holes, and allows for easy installation as a reliable replacement part.direct replacement pre-loaded pickguard for GTRS S800 and S801 Intelligent electric guitarscompatible with S900, P800 and P801 modelsincl. original HSS pickupsGTRS SC-1N single coil (neck)GTRS SC-1M single coil (middle)GTRS HM-1B humbucker with metal cover (bridge, not coil-splittable)Alnico V magnetscontrols for volume, tone, Super-Knob (main output / preset control)5-way selector switch for pickup selection11 screw holesOff-White (cream)Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.
This loaded pickguard is a direct replacement part for the GTRS S800 and S801 Intelligent electric guitars, exactly as installed at the factory. It is also compatible with the S900, P800, and P801 models. The pickguard comes fully pre-loaded and pre-wired, including pickups, controls for volume, tone, and the Super-Knob, as well as a 5-way selector switch for pickup selection. The HSS configuration with high quality pickups delivers clear, powerful tone. The neck and middle pickups are single coil, and the bridge humbucker is not coil-splittable. The pickguard is made of durable material, features 11 screw holes, and allows for easy installation as a reliable replacement part.direct replacement pre-loaded pickguard for GTRS S800 and S801 Intelligent electric guitarscompatible with S900, P800 and P801 modelsincl. original HSS pickupsGTRS SC-1N single coil (neck)GTRS SC-1M single coil (middle)GTRS HM-1B humbucker with metal cover (bridge, not coil-splittable)Alnico V magnetscontrols for volume, tone, Super-Knob (main output / preset control)5-way selector switch for pickup selection11 screw holesYellow Ice (pearl)Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.
This loaded pickguard is a direct replacement part for the GTRS W800, W900, and W902 Intelligent electric guitars, exactly as installed at the factory. The pickguard comes fully pre-loaded and pre-wired, including pickups, controls for volume, tone, and the Super-Knob, as well as a selector switch for pickup selection. The HH configuration with high quality humbuckers (not coil-splittable) delivers clear, powerful tone. Made of brushed metal, the pickguard features 11 screw holes and allows for easy installation as a reliable replacement part.direct replacement pre-loaded pickguard for GTRS W800, W900 and W902 Intelligent electric guitarsincl. original HM-2N (neck) and HM-2B (bridge) pickupshumbucker (not coil-splittable)HH configurationAlnico V magnetscontrols for volume, tone, Super-Knob (main output / preset control)3-way selector switch for pickup selectionmade of brushed metal11 screw holesblackNote: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.
This pickguard is a direct replacement part for the GTRS W800, W900, and W902 Intelligent electric guitars, identical in design to the factory installed pickguard, but supplied unloaded (without pickups or electronics). It features cutouts for volume, tone, and Super-Knob controls, as well as a selector switch for pickup selection. Made of brushed metal in an HH configuration, the pickguard includes 11 screw holes and allows for easy installation as a reliable replacement part.direct replacement pickguard for GTRS W800, W900 and W902 Intelligent electric guitarsHH configurationcutouts for a selector switch for pickup selection, as well as for volume, tone, and Super-Knob controls (main output / preset control)made of brushed metal11 screw holesblack
This flat ribbon cable is suitable for GTRS Intelligent electric guitars and connects the GTRS Intelligent Process System to the guitar's internal electronics. It features 20 conductors with a 0.02" (0.5 mm) pitch, ensuring reliable signal transmission. A practical replacement part for maintenance or repair of your GTRS Intelligent guitar.flexible ribbon flat cable for the GTRS Intelligent Process Systemconnects the GTRS Intelligent Process System to the guitar's internal electronicssuitable for GTRS Intelligent electric guitarsdimensions (L x W) 6.69" x 0.83" / 170 x 21 mm20 pinsspacing 0.02" / 0.5 mm
GTRS G100 Intelligent Process System as a replacement component for the S800, S801, P800, P801, W800, M800, M800C, M810 and SL810 Intelligent electric guitars. It features a 0.25" (6.35 mm) output jack that can be used with headphones for silent practice. The system also offers a USB-C output for USB-OTG recording and battery charging and Bluetooth 5.0. A flexible ribbon flat cable for connection to the guitar’s internal electronics is included.GTRS G100 Intelligent Process System as a replacement component for the 800 Series Intelligent electric guitarssuitable for the S800, S801, P800, P801, W800, M800, M800C, M810 and SL810 models0.25" / 6.35 mm output jack can be used with headphones for silent practiceUSB-C output for USB-OTG recording and battery chargingBluetooth 5.0incl. flexible ribbon flat cable for connection to the guitar's internal electronics
GTRS G150 Intelligent Process System for the W900 and S900 Intelligent electric guitars. It is compatible with 800 Series guitars and features a 0.25" (6.35 mm) output jack that can be used with headphones for silent practice. The system also offers a USB-C output for USB-OTG recording and battery charging, Bluetooth 5.0, and an integrated GTRS UHF wireless transmitter. A flexible ribbon flat cable for connection to the guitar’s internal electronics is included.GTRS G150 Intelligent Process System for the W900 and S900 Intelligent electric guitarscompatible with the 800 Series guitars0.25" / 6.35 mm output jack can be used with headphones for silent practiceUSB-C output for USB-OTG recording and battery chargingBluetooth 5.0integrated GTRS UHF wireless transmitterincl. flexible ribbon flat cable for connection to the guitar's internal electronics
This tremolo arm serves as a replacement part for the GTRS P800 and P801 Intelligent electric guitars and allows precise control over pitch modulation. The chrome finish ensures durability and an attractive appearance. Ideal as a replacement part for guitarists who value reliability and smooth tremolo performance.tremolo arm for Wilkinson VS 50 II (GTRS P800/801 electric guitars)right-hand versionno tipchrome finish
These locking machine heads are direct replacement parts for the GTRS P800 and P801 Intelligent electric guitars, exactly as installed at the factory. They are also compatible with the S800 and S801 models. Featuring staggered posts and a thumb screw locking mechanism, the machine heads improve the string angle over the nut and offer excellent tuning stability. The high quality construction ensures a modern appearance and optimal performance. A replacement part for guitarists who value quality and precise playability.direct replacement locking machine heads for the GTRS P800 and P801 Intelligent electric guitarscompatible with the S800 and S801 models6 pcs. for 6L orientationstaggered poststhumb screw locking mechanismclosed backmounting hole diameter 0.38" / 9.6 mmpost diameter 0.24" / 6 mmincl. mounting screws and bushingsgear ratio 18:1chrome finish
These vintage style machine heads are direct replacement parts for the GTRS S800 and S801 Intelligent electric guitars, exactly as installed at the factory. They are also compatible with the P800 and P801 models. They provide precise tuning, stable intonation, and reliable performance. A high quality replacement part for guitarists who value quality and classic design.direct replacement machine heads for the GTRS S800 and S801 Intelligent electric guitarscompatible with the P800 and P801 models6 pcs. for 6L orientationvintage styleclosed backmounting hole diameter 0.39" / 9.8 mmpost diameter 0.24" / 6 mmincl. mounting screws and bushingschrome finish
Replacement single bridge of the GTRS HL-I bridge system. The bridge is suitable for GTRS W800 and W900 headless electric guitars, ensuring reliable and precise installation. It allows for comfortable and accurate tuning with the right hand directly at the bridge.replacement single bridge of the GTRS HL-I bridge systemsuitable for GTRS W800 and W900 headless electric guitarsallows for comfortable and precise right-hand tuning
This USB 3.0 cable is suitable for GTRS Intelligent electric guitars and provides a reliable connection for various applications. It supports both charging the guitar as well as live streaming and direct recording. Its high quality construction ensures stable data transfer and long lasting durability.USB 3.0 Type-A to Type-C cable for GTRS Intelligent electric guitarssupports charging, live streaming and direct recordinglength 6.56 ft / 2 mblack
SP GTRS USB CAB
€8.90
*
· Delivery time: 3 days
This website uses cookies to ensure the best experience possible. More information...