One Control Minimal Series MIDI Solo Stereo Loop - True Bypass Looper

The RockBoard RBO B 5.3 CINQUE C pedalboard offers space for approx. 15 to 25 pedals (depending on the size of the pedals) and comes with a perfectly matched flight case. A warp-resistant aluminum profile frame, a durable PVC surface, non-slip PVC feet, and a removable, padded lid provide all the conditions for safe and comfortable transport of the valuable pedals. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.pedalboard for effects pedalsfor approx. 15 to 25 effects pedals (depending on size)sturdy and light aluminum constructionslotted design for easy pedal mountingmounting holes for RockBoard LED Light (not included) on both sidesmade from 1 cold-rolled aluminum sheetadditional U-shaped support braces for added rigidity10 degrees angled and absolutely plain board surface - no weld seamsslot for RockBoard® MOD patch bayscompatible with RockBoard® The Tray - universal power supply mounting solutionrobust black powder-coated surfacewidth 820 mm / 32 9/32"depth 424 mm / 16 11/16"height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"weight 5.15 kg / 11.4 lbs.including flight caseweight flight case approx. 12.8 kg / 28.1 lbs.interior dimensions main compartment (W x D x H) 830 x 435 x 175 mm / 32 11/16" x 17 1/8" 6 7/8"interior dimensions accessory compartment (W x D x H) 85 x 435 x 125 mm / 3 3/8" x 17/1/8" x 4 15/16"exterior dimensions (W x D x H) 990 x 475 x 210 mm / 39" x 12 1/8" x 8 1/4"including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1" wide) and cable tiesROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

The Micro Distro from One Control is a unique new type of multi-power supply because of its small size and versatility. The Micro Distro can power up to nine effects pedals with 2,000 mA current draw total, including one power outlet that varies from 12-18V output to experiment with your pedals that can run at higher voltages (and a 'SAG' knob to experiment with lowering that voltage). The 'Tiny Power Distributor' is reliable and stage ready with its low noise and low heat producing electronics. Additionally, you can link two Micro Distros to power up 17 effect pedals. The Micro Distro is an incredibly useful and innovative product that is sure to make using your pedal board easier. The Micro Distro All-In-One-Pack includes the rock solid EPA-2000 power supply and 4 varying length of power cables (9 total) so you can wire and power your whole board!multi-power supply for effects pedalsAll-In-One-Pack incl. power supply and power cableslow-noise designtotal output power: 2,000 mA8x 9V DC outlets, 2.1 x 5.5 mm barrel plug, polarity (-) center1x adjustable 12-18V DC outlet, max. 50 mA, 2.1 x 5.5 mm barrel plug, polarity (-) centerstatus LEDinput voltage 9V DCincl. One Control EPA-2000 9V Power Adapter, 1x DC-15-LS cable, 3x DC-30-LS cable, 3x DC-50-LS cable and 2x DC-70-LS cabledimensions (L x W x H) 98 x 48 x 35 mm / 3.85" x 1.89" x 1.38"weight 127 g / 0.28 lbscolour: black

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboardscompatible with a wide variety of other pedalboardsacts as the central access point to your effects setupestablishes clean cable paths to and from the pedal boarddetachable front plate for mounting on top or underneath pedalboards4 x 6,3 mm / ¼" TRS thru2 x 5-pin DIN MIDI thru1 x USB Type A thru1 x DC 2,1 x 5,5 mm barrel thru, rated for a maximum of 3 A at 30 V1 x AC IEC thru (male front / female back)all connections mirrored on the backsidedimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"weight 420 g / 0.93 lbsincl. mounting screws, counter nuts, and TX wrench

string cleaner and lubricant for guitars and bassesuseful accessory for cleaning and maintaining the strings and the fretboardremoves built-up dirt and grimekeeps the strings sounding bright and newextends the healthy lifetime of any stringssafely lubricates strings to play fasterreduces finger noiseincl. applicator and cleaning clothsilicone free

As the next step of the RockBoard® Flat MIDI Cables, the RockBoard® FlaX Plug MIDI Cables allow maximum freedom in setting the plug orientation, thanks to their compact omnidirectional construction. Almost every angle is easily adjustable. The direction of the connector is fixed by two screws securely. Everything is possible, straight, angled, and everything between; this makes it very easy to adapt to the corresponding equipment. The flat, rectangular conductor cable effectively reduces twisting and prevents damage to the cable core. The 5-pin assignment guarantees the implementation of almost any MIDI application.flat MIDI cable with omni-directional, lockable compact plugsplug orientation alterable from straight to angled to the left or rightorientation lockable via 1.5 mm hex key wrench (not included)flat rectangular cable, prevents cable breakage and cable jamscompact DIN 5-pin plugs5 x flexible oxygen-free copper conductors 5 x 7 x 0.12 mmsuitable for Clock/SYNC Capabilities & Phantom Powermax. rated current 1Aouter insulation: PVC (Polyvinylchloride)operating temperature: -20° C to +60° C (-4° F to 140° F)dimensions plug (L x W x H): 33 x 20 x 15 mm (1 19/64" x 25/32" x 19/32")dimensions cable (W x H): 6.5 x 3.5 mm (1/4” x 9/64”)length 30 cm (11 13/16")black

As the next step of the RockBoard® Flat MIDI Cables, the RockBoard® FlaX Plug MIDI Cables allow maximum freedom in setting the plug orientation, thanks to their compact omnidirectional construction. Almost every angle is easily adjustable. The direction of the connector is fixed by two screws securely. Everything is possible, straight, angled, and everything between; this makes it very easy to adapt to the corresponding equipment. The flat, rectangular conductor cable effectively reduces twisting and prevents damage to the cable core. The 5-pin assignment guarantees the implementation of almost any MIDI application.flat MIDI cable with omni-directional, lockable compact plugsplug orientation alterable from straight to angled to the left or rightorientation lockable via 1.5 mm hex key wrench (not included)flat rectangular cable, prevents cable breakage and cable jamscompact DIN 5-pin plugs5 x flexible oxygen-free copper conductors 5 x 7 x 0.12 mmsuitable for Clock/SYNC Capabilities & Phantom Powermax. rated current 1Aouter insulation: PVC (Polyvinylchloride)operating temperature: -20° C to +60° C (-4° F to 140° F)dimensions plug (L x W x H): 33 x 20 x 15 mm (1 19/64" x 25/32" x 19/32")dimensions cable (W x H): 6.5 x 3.5 mm (1/4” x 9/64”)length 60 cm (23 5/8")black

The RockBoard Flat Y-Splitter cable is extra flat and space-saving. Designed to optimize pedalboard real estate, it features a slim rectangular body and very thin angled plugs. It keeps the setup tidy and neat looking and guarantees a short, clean signal path and pristine signal quality. Using the RockBoard Flat Y-Splitter Cable ensures a perfect match to a TRS effects loop on an amp or pedal or constructive stereo operations.flat Y-splitter cablesplitting TRS stereo signals into TS mono signals or as insert cable for TRS effects loopscompact and super flat angled plugsflexible copper conductor 20 x 0.12 mmtwisted copper shielding 34 x 0.12 mmPE (polyethylene) signal insulationouter PVC insulationcapacity of less than 10 pF/decimetersconductor resistance of less than 10 mOhm/decimeters1 x angled 6.3 mm TRS audio plug2 x angled 6.3 mm TS audio plugs (gray = tip / black = ring)operating temperature: -15° C to +70° C (5° F to 158° F)outer dimensions cable (W x H): 7 x 3 mm (9/32” x 1/8”)outer dimensions plugs (W x H): 12.5 x 7.5 mm (31/64” x 19/64”)length 30 cm / 11 13/16"black

The new RockBoard® The Tray is a universal power supply mounting solution for almost any multi power supply unit you can imagine. Its one-size-fits-all design can be mounted underneath any new RockBoard® pedalboard (except Duo 2.0, 2.1, 2.2, 2.3 & TRES 3.0). Due to the construction of the RockBoard's vertical support braces no holes have to be drilled into your pedalboard and it can easily be fixed with only one screw. Using the holes in the Tray's surface, you can either mount power supply units to it using screws or cable ties. Also because of its flat surface hook and loop tape or other adhesive tape can be used to fix your power supply to it.universal power supply mounting solutionfits all new RockBoard® pedalboards except DUO 2.0, 2.1, 2.2, 2.3 & TRES 3.0no drill holes necessarymanufactured from steelincl. 2 x RBO B THE TRAY RIVETdimensions (L x W) 241 x 122 mm / 9 1/2 x 4 13/16weight 210 g / 0.46 lb.ROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners. 

As the next step of the RockBoard® Flat MIDI Cables, the RockBoard® FlaX Plug MIDI Cables allow maximum freedom in setting the plug orientation, thanks to their compact omnidirectional construction. Almost every angle is easily adjustable. The direction of the connector is fixed by two screws securely. Everything is possible, straight, angled, and everything between; this makes it very easy to adapt to the corresponding equipment. The flat, rectangular conductor cable effectively reduces twisting and prevents damage to the cable core. The 5-pin assignment guarantees the implementation of almost any MIDI application.flat MIDI cable with omni-directional, lockable compact plugsplug orientation alterable from straight to angled to the left or rightorientation lockable via 1.5 mm hex key wrench (not included)flat rectangular cable, prevents cable breakage and cable jamscompact DIN 5-pin plugs5 x flexible oxygen-free copper conductors 5 x 7 x 0.12 mmsuitable for Clock/SYNC Capabilities & Phantom Powermax. rated current 1Aouter insulation: PVC (Polyvinylchloride)operating temperature: -20° C to +60° C (-4° F to 140° F)dimensions plug (L x W x H): 33 x 20 x 15 mm (1 19/64" x 25/32" x 19/32")dimensions cable (W x H): 6.5 x 3.5 mm (1/4” x 9/64”)length 100 cm (39 3/8")black

With the One Control MIDI Dual Stereo Loop (MDSL) of the Minimal Series, One Control offers the player a simple MIDI loop functionality, perfectly suited for small pedalboards as well as for large effects systems. Mono and stereo signals can be processed variably. For example, it is possible to convert mono signals into stereo signals (dual-mono operation) and send them to stereo effects. The One Control MIDI dual stereo loop can use between 1-8 MIDI channels to receive control signals and switch the two effect loops on and off via MIDI PC or CC.stereo true bypass looper for effect pedalsbypass switching via MIDIcan use between 1-8 MIDI channels to receive control signalscan be controlled via Program Change (PC) or Control Change (CC) signalsmono and stereo signals can be processed variablytrue bypassstatus LEDsmetal housing6.3 mm stereo jack input / output (TRS)6.3 mm stereo jack send / return (TRS)5-pin MIDI inputpower supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) insidebattery operation not supportedcurrent draw max. 120 mAdimensions (L x W x H) 68 x 125 x 32 mm / 2.68" x 4.92" x 1.26"weight 366 g / 0.81 lbs

This powerful pickup delivers a balanced and highly musical sound, with rich articulated bass, mid, and quite the biting high. A pleasant mild barking accompanies the midrange without ever sounding harsh. The bass is full and strong, but never stuffy or overwashed. Compared with the Alnico version, it has a sharper attack and compressed bass. Ideal for classic rock, heavy rock, funk, punk, R & B and metal.Music Man style bass humbucker pickup with 4 knob tone circuitpunchy and aggressive like the 90s Ernie Ball Music Man era5-stringdual coilceramic magnetactiveshielded 4 conductor hook-up cablewax pottedmedium-high outputblackincl. 3-band EQ with velcro base for mountingcircuit board dimensions (L x W x H) 2.26" x 1.00" x 0.55" / 57.31 x 25.50 x 13.93 mmvelcro base dimensions (L x W x H) 2.42" x 1.48" x 0.08" / 61.52 x 37.56 x 1.98 mmmade in USANote: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. 

String Saver Originals saddles for J or P style bass manufactured from String Saver materialimpregnated with PTFEincreased harmonic contenteasy to installspacing E to G 56.80 mm (2 1/4")dimensions (L x W x H) 18.97 mm x 8.51 mm x 8.51 mm (3/4" x 11/32" x 11/32")1 set of 4 pieces

Swiss Things is an all-in-one pedalboard reconciliation solution designed to really tie your rig together without resorting to some confusing loop-switching contraption bigger than a meatball party sub that eats up the entire bottom row of your board and kind-of-but-not-quite does what you need it to do. Swiss Things combines two Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.A /B/Y / Looper Switcher /Boost effects pedal2 serial effects loopsup to 20 dB of clean boost2 separate outputsFlexi-Switch™ (Loop 1 & Loop 2, Both & Boost) footswitches work as momentary or latching switchesoutput volume adjustable via expression controltrue bypass (Loop 1) / buffered bypass (Loop 2)control for BoostOutput B Phase control button for reversing phase of output BLoop 1, Loop 2, Boost, A/B, Both footswitchessilent relay-based soft touch switchingstatus LEDsmetal housing6.3 mm mono input6.3 mm mono Output A, Output B und Tuner Out6.3 mm mono Loop 1 Send/Return6.3 mm mono Loop 2 Send/Return6.3 mm TRS Volume EXP inputpower supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supported current draw 40 mAdimensons (W x D x H) 144 x 121 x 57 mm weight 630 g

inserts and mounting studsfor Floyd Rose Original and Pro Series vibrato systemsset of 2black nickelmade in Germany

electric upright bass bridge with piezo pickupfits Warwick Triumph models4-stringstring spacing 27.4 / 27.3 mmshielded 1-conductor cablepassivemapledimensions (L x W x H) 111.5 x 16.9 x 43.8 mmNote: The right and refund policy does not apply to pickups if their cables have been cut or soldered, if they show signs of use, if they have already been installed or other damage affecting the condition of the goods is present. 

The switch can be used as a replacement for existing mid switches in Bartolini pre-wired harnesses (e.g. HR-4.7, HR-5.3, HR-5.4). It can also be used to upgrade existing instrument electronics equipped with the Bartolini NTMB+ preamp.pre-wired mid switch for NTMB+ mini toggle switch with flat toggleused to select pre-set mid frequencies for Bartolini NTMB+ preamps3 switch positions: 250 Hz, 500 Hz, 800 Hzpre-installed PCB with capacitorsshaft length: 8 mm / 0.31"shaft diameter: 6 mm / 0.24"body dimensions 12.7 x 13.1 x 15.8 mm / 0.50" x 0.52" x 0.62" (WxLxD)incl. washer, lock washer, nutblackWarranty Information for Electronics: Electronic components such as preamps and circuit boards by Sadowsky, MEC, Seymour Duncan, and Bartolini are covered exclusively by the legal warranty period. These items are classified as electronic wear parts and are therefore excluded from the extended 4-year warranty. Thank you for your understanding. Note: Electronic components are excluded from the right of return if their cables have been cut or soldered, if they show signs of use, if they have already been installed, or if there is other damage that affects the condition of the goods. 

strings for classical guitar6-string setnormal tensiongauges: .028", .032", .040", .030", .035", .043"treble strings made of nylonbass strings with silver-plated copper woundtie-on

The One Control Junction BJF Box belongs to the Minimal Series, which offers many useful tools and gadgets for modern pedalboards. It is a convenient small in- and output box that can be used to route signal to and from your board to keep everything clean and organized. The One Control Pedal Board Junction BJF Box is equipped with a BJF buffer developed by Bjorn Juhl, which can be switched on and off as desired. The Junction Box comes with two pairs of 6.35 mm (1/4") mono jacks which are all respectively connected to each other.patchbay / junction box for pedalboardshigh quality BJF buffer (switchable)metal housingbuffer / bypass switchpolarity / reverse switch2 pairs of 6.3 mm mono in / output jackspower supply via optional 9V DC power supply, polarity (-) center, 2.1 x 5.5 mm barrel plugbattery operation is not supportedcurrent draw 3 mAdimensions (L x W x H) 46 x 94 x 40 mm / 1.81" x 3.7" x 1.57"weight 220 g / 0.49 lbs