One Control Honey Bee OD 4K Mini Standard
Delivery to Germany in 3 days
(Item in stock)
Article-No.:
OC HONEY BEE 4K MS
One Control Honey Bee OD 4K Mini Standard
This pedal needs no introduction. If you're familiar with the designs from Bjorn Juhl (BJF/BJFe) then you know that this is one of his best creations, inspired by the sound of an old Supro amp. For the 20th anniversary of the original BJFe Honey Bee Overdrive, Bjorn Juhl has now brought the sound of his classic low-gain overdrive to the One Control Mini pedal platform, featuring both the classic, warm, syrupy Honey Bee texture with Modern/Vintage switch and a special new Custom version with increased gain and a hot Crimson finish. The Honey Bee Overdrive is known for it's warm overdrive crunch which is easily adjustable by a twist of a knob. Over the years, there have been several revisions of this sought-after pedal and the One Control model is the best version yet, as it contains all the revisions and improvements from previous models. Two switchable modes set the general sound of the pedal: Vintage Mode (original sounding Honey Bee OD) provides a mild and classic overdrive tone with an unique high frequency response. Modern Mode is the sound of the current Honey Bee OD and includes all previous revisions. Compared to the Vintage mode, you'll notice increased gain, especially in the low ends. In addition, this version has separate controls for bass and treble. Of course, the Honey Bee OD can also be used by bassists.
- overdrive effects pedal
- based on the classic BJFe Honey Bee Overdrive
- inspired by the sound of an old Supro amp
- two switchable sound modes (Vintage, Modern)
- Vintage setting features the classic sound of the Honey Bee Overdrive
- Modern setting provides the latest version of the design with more gain and an extended control range
- designed by Bjorn Juhl
- true bypass
- controls for Volume, Drive, Bass, Treble
- Modern / Vintage switch
- bypass footswitch
- status LED
- aluminum housing
- 6.3 mm mono in / output jacks
- power supply via 9V battery or optional 9V DC power supply, 2.1 mm x 5.5 mm barrel plug, polarity (-) center (battery not included)
- current draw 3 mA
- dimensions (L x W x H) 100 x 47 x 48 mm / 3.94" x 1.85" x 1.89"
- weight 160 g / 0.35 lbs
Login
Manufacturer
OneControl - OCCN Technology Co.
Da Xin Road
518052
Shenzhen
China
support@one-control.com
https://one-control.com/
OneControl - OCCN Technology Co.
Da Xin Road
518052
Shenzhen
China
support@one-control.com
https://one-control.com/
Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de
General safety instructions
- Read the operating instructions carefully before using the appliance.
- Keep the operating instructions for future reference.
- Only use the device for its intended purpose.
- Keep the device away from water, moisture and extreme temperatures.
- Keep the appliance out of the reach of children.
Electrical safety
- Ensure that the mains voltage corresponds to the specifications on the device.
- Only use the mains adapter supplied or an equivalent mains adapter recommended by a specialist.
- Unplug the appliance if it is not to be used for a long period of time.
- Protect the mains cable from damage. Do not use the device if the mains cable is damaged.
- Avoid contact of the appliance with water or other liquids to minimise the risk of electric shock.
Notes on repairs
- Repairs may only be carried out by qualified specialists.
- Do not attempt to open or repair the appliance yourself, as this may result in serious injury or damage to the appliance.
- In the event of malfunctions or defects, contact an authorised service technician.
Warning notices
- Do not open the appliance. It contains no user-serviceable parts.
- Ensure that the ventilation slots of the appliance are not blocked to prevent overheating.
- Do not use the appliance in the vicinity of flammable materials or liquids.
- Disconnect the mains plug during thunderstorms or long breaks in operation to avoid possible damage from voltage peaks.
- Do not expose the device to direct sunlight or other sources of heat.
Statutory warranty
All goods are covered by the statutory warranty of at least two years under EU law.
Guarantee
Skip product gallery
Accessories
RockBoard PedalSafe Type L - Protective Cover And RockBoard Mounting Plate For Standard Mini Pedals
· Delivery time: 3 days
Variante:
RBO B PS T L RBO
The RockBoard PedalSafe system was designed to keep your pedals safe, secure and in pristine condition. The flexible PedalSafe Type L Protective Cover and the QuickMount Pedal Mounting Plate fit for MXR, Pigtronix, Xotic, XVive and many other effects pedals with mini-sized housings. The crystal-clear pedal cover allows you to see your settings while the shell is protecting them against accidental adjustments. This set includes the protective cover (PedalSafe) and the RockBoard mounting plate (QuickMount). The RockBoard QuickMount system was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard slot grid on our pedalboards and allows for instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue.PedalSafe Protective Cover for MXR, Pigtronix, Xotic, XVive and many other effects pedals with mini-sized housingssuitable for most effects pedals with housing dimensions of approx. 94 x 37 x 37 mm / 3 45/64" x 1 29/64" x 1 29/64"includes QuickMount Pedal Mounting Plate Type L for RockBoard pedalboards, replacement mounting screws and shim plate to slightly raise the height of pedals '- QuickMount mounting hole distance (W x D): 29 x 72-82 mm / 1 9/64" x 2 53/64" to 3 15/64"protects your effects pedals from dirt and weathersecures settings against accidental knob adjustmentssafely mounts your effects pedals on RockBoard pedalboardsno permanent modifications necessaryROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B PS T L RBO
€20.40
*
RockBoard PedalSafe Type L - Protective Cover And Universal Mounting Plate For Standard Mini Pedals
· Delivery time: 3 days
Variante:
RBO B PS T L UNI
The RockBoard PedalSafe system was designed to keep your pedals safe, secure and in pristine condition. The flexible PedalSafe Type L Protective Cover and the Universal Pedal Mounting Plate fit for MXR, Pigtronix, Xotic, XVive and many other effects pedals with mini-sized housings. The crystal-clear pedal cover allows you to see your settings while the shell is protecting them against accidental adjustments. This set includes the protective cover (PedalSafe) and an universal mounting plate. The RockBoard Universal Pedal Mounting Plate was designed to mount your effects pedals with the PedalSafe system on almost all kinds of pedalboards that don't feature the innovative RockBoard Slot Grid. The mounting plates simply screw onto the back of your pedals, using the original screws (or supplied replacement screws) and can be removed easily without any residue.PedalSafe Protective Cover for MXR, Pigtronix, Xotic, XVive and many other effects pedals with mini-sized housingssuitable for most effects pedals with housing dimensions of approx. 94 x 37 x 37 mm / 3 45/64" x 1 29/64" x 1 29/64"mounting hole distance (W x D): 29 x 72-82 mm / 1 9/64" x 2 53/64" to 3 15/64"includes Universal Pedal Mounting Plate Type L, silicone adhesive pad, replacement mounting screws and shim plate to slightly raise the height of pedalsprotects your effects pedals from dirt and weathersecures settings against accidental knob adjustmentssafely mounts your effects pedals on almost all kinds of pedalboardsno permanent modifications necessaryROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B PS T L UNI
€18.60
*
RockBoard QuickMount Type L - Pedal Mounting Plate For Standard Mini Pedals
· Delivery time: 3 days
The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for MXR, Pigtronix, TC Electronic, Xotic, XVive and many other effects pedals with mini-sized housingsflat surface, universally usabledimensions (W x H): 41 x 93 mm / 1,61" x 3,66"mounting hole distance (W x D): 29 x 72-82 mm / 1 9/64" x 2 53/64" to 3 15/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.
RBO B QM T L
€12.40
*
Rockboard Cable Set 50 CableTies & 25 CableTies Holder
· Delivery time: 3 days
Cable management for pedalboards, optimized for neat, quick routing and fixing of cable paths. Perfect for organizing flexible customization options on and under the pedalboard. The set includes 50 cable ties and 25 matching holders to securely hold the cable ties in place. The cable tie holders are equipped with proven 3M™ adhesive surfaces, which guarantees reliable adhesion.Intelligent cable management set50 x cable ties 2 x 150 mm, black25 x holders for cable ties 20 x 20 mm, black, self-adhesiveProven 3M™ adhesive pad on the cable tie holders for a secure and powerful hold
RBO CO SET 1
€3.90
*
RockBoard Effects Pedal Bag No. 01
· Delivery time: 3 days
Variante:
RBO EPB 01
RockBoard® Effects Pedal Bags offer perfect protection for guitar and bass multi effects processors, voice multi effects processors, as well as looper switchers and MIDI controllers - for a bargain price!gig bag for multi effects pedals, looper switchers and other floor equipmentsuitable for Warwick Gnome, Gnome i and Gnome i Prostrong, water-resistant RokTex® surface material10 mm / 3/8 paddingblack nylon inner lining2-way zipper (8 mm / 5/16 wide) with nylon gripdetachable, adjustable and padded shoulder strap (35 mm / 1 3/8 wide)padded twin-handle1 front pocket for cables and accessories1 inside accessory pocketPVC reinforced bottommetal feet & hardwareblack width (interior) 200 mm / 7 7/8"height (interior) 180 mm / 7 1/16"depth (interior) 100 mm / 3 15/16"
RBO EPB 01
€56.00
*
RockBoard Effects Pedal Bag No. 02
· Delivery time: 3 days
Variante:
RBO EPB 02
RockBoard® Effects Pedal Bags offer perfect protection for guitar and bass multi effects processors, voice multi effects processors, as well as looper switchers and MIDI controllers - for a bargain price!gig bag for multi effects pedals, looper switchers and other floor equipmentstrong, water-resistant RokTex® surface material10 mm / 3/8 paddingblack nylon inner lining2-way zipper (8 mm / 5/16 wide) with nylon gripdetachable, adjustable and padded shoulder strap (35 mm / 1 3/8 wide)padded twin-handle1 front pocket for cables and accessories1 inside accessory pocketPVC reinforced bottommetal feet & hardwareblack width (interior) 250 mm / 9 13/16"height (interior) 180 mm / 7 1/16"depth (interior) 100 mm / 3 15/16"
RBO EPB 02
€59.50
*
Rockboard Pedalboard Tape, 100 cm
· Delivery time: 3 days
3M™ Pedalboard Tape (Type 250) for securely mounting effect pedals to the pedalboard. Flexible organization of the pedals by simply cutting the tape to the desired size. Can be used like hook and loop tape, but the use of interlocking hooks eliminates the need for a counterpart and ensures a much stronger connection. The proven 3M™ adhesive technology ensures a secure and powerful hold for all pedal sizes.3M™ Pedalboard Tape (Type 250) for effect pedalsCan be used like hook and loop tapeno counterpart is required due to the use of interlocking hooksguarantees a much stronger connection than conventional hook and loop tapeproven 3M™ adhesive technology ensures a secure and firm hold for all pedal sizesself-adhesive can be cut to size 25 mm x 1 m
RBO CO SET 2
€14.90
*
Get a 4-year guarantee
Our 4 year extended warranty is available for One Control Honey Bee OD 4K Mini Standard. Double your warranty period by registering your product.
