Keeley Aria - Compressor / Overdrive

Price on request Prices include VAT. plus shipping costs

€229.00

Prices include VAT. plus shipping costs

Delivery to Germany in 3 days (Item in stock)

Article-No.: KE ARIA

Keeley Aria - Compressor / Overdrive

Keeley has combined his most popular two effects, Drive and Compression! The legendary Keeley Compressor and Red Dirt Overdrive have been packed into one small and powerful stomp box! Swap the order of the compressor and drive for amazing sonic versatility…on the fly! 2 Mode Overdrive - High Gain and Smooth Saturation in one mode - Clean and Bold in Low Gain mode. TRS insert jacks allow any number of effects to be inserted in between the Compressor and Drive circuits for added flexibility. Compressor Plus Tube Style Dirt - The Aria Compressor Overdrive features a perfectly voiced treble recovery circuit and blend control. This is our most toneful compressor yet boasting beautiful sustain and bloom. The blend and tone controls allow you to perfectly adjust the output response of the compressor. No more dull and lifeless sounds that are overly squashed. The newly redesigned tube style overdrive circuit features our super overdrive Red Dirt sound as well as the very clean and bold White Sands transparent drive. These two modes have been fine tuned to offer an even more impressive gain range. Simple Volume, Tone, and Drive controls with a toggle switch to adjust between low and hi gain. Tone Foundation - Compressors and Overdrive are a fundamental part of recording and performing guitar. Most people run compression before drive to reduce idle static. Using compressors after drives offers a very smooth and even tone, tons of sustain and usually a very warm and rounded tone profile.

compressor / overdrive effects pedal
Compressor and Drive channels usable separately as well as together
order of effects switchable
Switching System Mode for using both effects separetely even with looper switchers
true bypass
Compressor section controls for Level, Blend, Sustain and Tone
Drive section control for Level Gain and Tone
LOW / HIGH toggle switch for selecting between Low and High gain modes
FX ORDER toggle switch for selecting order of Compressor and Drive section in the signal chain
4 internal dip switches for activating Switching System Mode
Compressor footswitch
Drive footswitch
status LEDs
metal housing
6.3 mm mono IN/OUT jacks
power supply via optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) center
battery operation not supported
current draw 50 mA
dimensions (L x W x H) 120 x 95 x 50 mm
weight 350 g
made in USA

Keeley Aria - Review by Muzikus [CZ], [02-2019]

Keeley Aria - Review by TopGuitar [PL], [02-2019]

Keeley Aria - Review by Amazona [DE], [08-2018]

Login

E-Mail

Password

Lost password

No reviews found. Share your insights with others.

Manufacturer
Keeley Electronics, Inc,
1733 S. Fretz Ave., Suite C
OK 73013
Edmond
Vereinigte Staaten
service@rkfx.com
https://robertkeeley.com/

Importer
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46
08258
Markneukirchen
Deutschland
https://www.warwick.de
info@warwick.de

General safety instructions
- Read the operating instructions carefully before using the appliance.
- Keep the operating instructions for future reference.
- Only use the device for its intended purpose.
- Keep the device away from water, moisture and extreme temperatures.
- Keep the appliance out of the reach of children.

Electrical safety
- Ensure that the mains voltage corresponds to the specifications on the device.
- Only use the mains adapter supplied or an equivalent mains adapter recommended by a specialist.
- Unplug the appliance if it is not to be used for a long period of time.
- Protect the mains cable from damage. Do not use the device if the mains cable is damaged.
- Avoid contact of the appliance with water or other liquids to minimise the risk of electric shock.

Notes on repairs
- Repairs may only be carried out by qualified specialists.
- Do not attempt to open or repair the appliance yourself, as this may result in serious injury or damage to the appliance.
- In the event of malfunctions or defects, contact an authorised service technician.

Warning notices
- Do not open the appliance. It contains no user-serviceable parts.
- Ensure that the ventilation slots of the appliance are not blocked to prevent overheating.
- Do not use the appliance in the vicinity of flammable materials or liquids.
- Disconnect the mains plug during thunderstorms or long breaks in operation to avoid possible damage from voltage peaks.
- Do not expose the device to direct sunlight or other sources of heat.

Statutory warranty

All goods are covered by the statutory warranty of at least two years under EU law.

Guarantee

Accessories

RockBoard PedalSafe Type C - Protective Cover And RockBoard Mounting Plate For Large Vertical Pedals

Variante: RBO B PS T C RBO

The RockBoard PedalSafe system was designed to keep your pedals safe, secure and in pristine condition. The flexible PedalSafe Type C Protective Cover and the QuickMount Pedal Mounting Plate fit for EarthQuaker Devices, Electro Harmonix, Keeley Electronics, MXR, JHS Pedals, Darkglass Electronics and many other effects pedals with larger vertical housings. The crystal-clear pedal cover allows you to see your settings while the shell is protecting them against accidental adjustments. This set includes the protective cover (PedalSafe) and the RockBoard mounting plate (QuickMount). The RockBoard QuickMount system was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard slot grid on our pedalboards and allows for instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue.PedalSafe Protective Cover for EarthQuaker Devices, Electro Harmonix, Keeley Electronics, MXR, JHS Pedals, Darkglass Electronics and many other effects pedals with larger vertical housingssuitable for most effects pedals with housing dimensions of approx. 120 x 95 x 38 mm / 4 23/32" x 3 47/64" x 1 1/2"includes QuickMount Pedal Mounting Plate Type C for RockBoard pedalboards, replacement mounting screws and shim plate to slightly raise the height of pedals '- QuickMount mounting hole distance (W x D): 78-83 x 110 mm / 3 5/64"-3 17/64" x 4 21/64"protects your effects pedals from dirt and weathersecures settings against accidental knob adjustmentssafely mounts your effects pedals on RockBoard pedalboardsno permanent modifications necessaryROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B PS T C RBO

€28.60 *

· Delivery time: 3 days

RockBoard PedalSafe Type C - Protective Cover And Universal Mounting Plate For Large Vertical Pedals

Variante: RBO B PS T C UNI

The RockBoard PedalSafe system was designed to keep your pedals safe, secure and in pristine condition. The flexible PedalSafe Type C Protective Cover and the Universal Pedal Mounting Plate fit for EarthQuaker Devices, Electro Harmonix, Keeley Electronics, MXR, JHS Pedals, Darkglass Electronics and many other effects pedals with larger vertical housings. The crystal-clear pedal cover allows you to see your settings while the shell is protecting them against accidental adjustments. This set includes the protective cover (PedalSafe) and an universal mounting plate. The RockBoard Universal Pedal Mounting Plate was designed to mount your effects pedals with the PedalSafe system on almost all kinds of pedalboards that don't feature the innovative RockBoard Slot Grid. The mounting plates simply screw onto the back of your pedals, using the original screws (or supplied replacement screws) and can be removed easily without any residue.PedalSafe Protective Cover for EarthQuaker Devices, Electro Harmonix, Keeley Electronics, MXR, JHS Pedals, Darkglass Electronics and many other effects pedals with larger vertical housingssuitable for most effects pedals with housing dimensions of approx. 120 x 95 x 38 mm / 4 23/32" x 3 47/64" x 1 1/2"mounting hole distance (W x D): 78-83 x 110 mm / 3 5/64"-3 17/64" x 4 21/64"includes Universal Pedal Mounting Plate Type C, silicone adhesive pad, replacement mounting screws and shim plate to slightly raise the height of pedalsprotects your effects pedals from dirt and weathersecures settings against accidental knob adjustmentssafely mounts your effects pedals on almost all kinds of pedalboardsno permanent modifications necessaryROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B PS T C UNI

€27.70 *

· Delivery time: 3 days

RockBoard QuickMount Type C - Pedal Mounting Plate For Large Vertical Pedals

The RockBoard QuickMount System was designed to do away with sticky hook and loop tape that attracts dust and dirt and is a hassle to remove from your pedals. It fits perfectly in the RockBoard Slot Grid on our pedalboards and allows instant secure mounting of your pedals. The QuickMount plates are designed to screw onto the back of your pedals, using the original screws (or supplied replacement screws) and to be easily removable without any residue. Most RockBoard QuickMount Pedal Mounting Plates will fit a variety of different pedals. Don't fret if your pedal has different screw holes for the bottom plate. All RockBoard QuickMount Pedal Mounting Plates with a flat surface include a reusable adhesive silicone pad that sticks to any smooth surface without leaving any residue.QuickMount Pedal Mounting Plate for EarthQuaker Devices, Electro Harmonix, Keeley Electronics, MXR, JHS Pedals, Darkglass Electronics and many other effects pedals with larger vertical housingsflat surface, universally usabledimensions (W x H): 94 x 124 mm / 3,70" x 4,88"mounting hole distance (W x D): 78 to 83 x 110 mm / 3 5/64" to 3 17/64" x 4 21/64"safely mounts your effects pedals on RockBoard pedalboardsreplaces sticky hook and loop tapemounts on top of existing effects pedal back plates, removable without any residueno permanent modifications necessarymade of carbon-reinforced composite plasticincluding replacement mounting screws and silicone adhesive pad for use with pedals without back plate screws or different mounting hole configurationsROCKBOARD®, PEDALSAFE®, and QUICKMOUNT® are trademarks of Warwick GmbH & Co. Music Equipment KG and may be registered in one or more product classes with the US Patent and Trademark Office. Some of the trademarks mentioned may also be protected in certain regions for one or more categories of goods. This list does not represent a complete overview of all Warwick trademarks and does not include common law trademarks or service marks. All other names and trademarks mentioned here are trade names, trademarks, or service marks of their respective owners.

RBO B QM T C

€13.50 *

· Delivery time: 3 days

Rockboard Cable Set 50 CableTies & 25 CableTies Holder

Cable management for pedalboards, optimized for neat, quick routing and fixing of cable paths. Perfect for organizing flexible customization options on and under the pedalboard. The set includes 50 cable ties and 25 matching holders to securely hold the cable ties in place. The cable tie holders are equipped with proven 3M™ adhesive surfaces, which guarantees reliable adhesion.Intelligent cable management set50 x cable ties 2 x 150 mm, black25 x holders for cable ties 20 x 20 mm, black, self-adhesiveProven 3M™ adhesive pad on the cable tie holders for a secure and powerful hold

RBO CO SET 1

€3.90 *

· Delivery time: 3 days

RockBoard Effects Pedal Bag No. 01

Variante: RBO EPB 01

RockBoard® Effects Pedal Bags offer perfect protection for guitar and bass multi effects processors, voice multi effects processors, as well as looper switchers and MIDI controllers - for a bargain price!gig bag for multi effects pedals, looper switchers and other floor equipmentsuitable for Warwick Gnome, Gnome i and Gnome i Prostrong, water-resistant RokTex® surface material10 mm / 3/8 paddingblack nylon inner lining2-way zipper (8 mm / 5/16 wide) with nylon gripdetachable, adjustable and padded shoulder strap (35 mm / 1 3/8 wide)padded twin-handle1 front pocket for cables and accessories1 inside accessory pocketPVC reinforced bottommetal feet & hardwareblack width (interior) 200 mm / 7 7/8"height (interior) 180 mm / 7 1/16"depth (interior) 100 mm / 3 15/16"

RBO EPB 01

€56.00 *

· Delivery time: 3 days

RockBoard Effects Pedal Bag No. 02

Variante: RBO EPB 02

RockBoard® Effects Pedal Bags offer perfect protection for guitar and bass multi effects processors, voice multi effects processors, as well as looper switchers and MIDI controllers - for a bargain price!gig bag for multi effects pedals, looper switchers and other floor equipmentstrong, water-resistant RokTex® surface material10 mm / 3/8 paddingblack nylon inner lining2-way zipper (8 mm / 5/16 wide) with nylon gripdetachable, adjustable and padded shoulder strap (35 mm / 1 3/8 wide)padded twin-handle1 front pocket for cables and accessories1 inside accessory pocketPVC reinforced bottommetal feet & hardwareblack width (interior) 250 mm / 9 13/16"height (interior) 180 mm / 7 1/16"depth (interior) 100 mm / 3 15/16"

RBO EPB 02

€59.50 *

· Delivery time: 3 days

Rockboard Pedalboard Tape, 100 cm

3M™ Pedalboard Tape (Type 250) for securely mounting effect pedals to the pedalboard. Flexible organization of the pedals by simply cutting the tape to the desired size. Can be used like hook and loop tape, but the use of interlocking hooks eliminates the need for a counterpart and ensures a much stronger connection. The proven 3M™ adhesive technology ensures a secure and powerful hold for all pedal sizes.3M™ Pedalboard Tape (Type 250) for effect pedalsCan be used like hook and loop tapeno counterpart is required due to the use of interlocking hooksguarantees a much stronger connection than conventional hook and loop tapeproven 3M™ adhesive technology ensures a secure and firm hold for all pedal sizesself-adhesive can be cut to size 25 mm x 1 m

RBO CO SET 2

€14.90 *

· Delivery time: 3 days