Signal Routing Foot Switches

Simple, solid and very useful. Have you ever needed a simple mute switch with no frills? Just hit the footswitch and anything plugged into the input is made 100% silent.mute switch effects pedalcompletely cuts the signalmute footswitchbi-color status LEDmetal housing6.3 mm mono IN/OUT jackspower supply via optional 9V DC adapter 2.1 mm x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw less than 100 mApower supply only required for indicator LEDdimensions (L x W x H) 47 x 95 x 35 mm / 1.85" x 3.74" x 1.37"weight 130 g / 0.28 lbsmade in USA

Use the Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting.remote footswitch for effects pedalsfor remotely activating onboard toggle functions of compatible effects pedalscompatible with JHS Morning Glory V4, SuperBolt V2, Kilt V2 and Twin Twelve V2uses standard TS Instrument cable for connection6.3 mm TS OUT jackno power supply requireddimensions (L x W x H) 53 x 50 x 50 mm / 2.08" x 1.96" x 1.96"weight 100 g / 0.22 lbs made in USA

wireless footswitch for Mooer intelligent productssuitable for Mooer intelligent products e.g. Mooer SD 30i, Prime P1 etc.changes presets and tone settings while playingtap tempo control for selected presets with delay effectbuilt-in tuner function2.4 GHz ISM band for worldwide usebuilt-in rechargeable lithium-ion battery (720 mAh)4 footswitchesPower On/Off switch1x USB Type-C portdimensions (L x W x H) 224 x 40 x 38 mm / 8.81" x 1.57" x 1.49"weight 220 g / 0.48 lbsincl. USB-A to USB-C charging cable

wireless footswitch for Mooer intelligent productssuitable for Mooer intelligent products e.g. Mooer SD 30i, Prime P1 etc.changes presets and tone settings while playingtap tempo control for selected presets with delay effectbuilt-in tuner function2.4 GHz ISM band for worldwide usebuilt-in rechargeable lithium-ion battery (720 mAh)4 footswitchesPower On/Off switch1x USB Type-C portdimensions (L x W x H) 224 x 40 x 38 mm / 8.81" x 1.57" x 1.49"weight 220 g / 0.48 lbsincl. USB-A to USB-C charging cable

wireless footswitch for GTRS guitars and some Mooer effect pedalschanges presets and tone settings while playingtap tempo control for selected presets with delay effectbuilt-in tuner function for GTRS guitar2.4 GHz ISM band for worldwide usebuilt-in rechargeable lithium-ion battery (720 mAh)4 footswitchesPower On/Off switch1x USB Type-C socketdimensions (L x W x H) 224 x 40 x 38 mm / 8.81" x 1.57" x 1.49"weight 220 g / 0.48 lbsincl. USB-A to USB-C charging cableNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

wireless footswitch for GTRS guitars and some Mooer effect pedalschanges presets and tone settings while playingtap tempo control for selected presets with delay effectbuilt-in tuner function for GTRS guitar2.4 GHz ISM band for worldwide usebuilt-in rechargeable lithium-ion battery (720 mAh)4 footswitchesPower On/Off switch1x USB Type-C socketdimensions (L x W x H) 224 x 40 x 38 mm / 8.81" x 1.57" x 1.49"weight 220 g / 0.48 lbsincl. USB-A to USB-C charging cableNote: A 6-month warranty is provided for the batteries built into the devices. This warranty covers defects due to faulty materials or workmanship that occur during normal use.

The Meris Preset Switch offers instant control to easily access 4 distinct sounds with a simple and compact footswitch interface. It is the easiest way to save and access up to 4 different sounds on any one or more Meris pedal(s). Meris dreamed up the preset switch for players who would want simple, instantaneous access to multiple sounds. Meris founder and engineer Terry Burton designed it as DIY midi project for the adventurous tinkerers. Expand your palette with the Meris Preset Switch!preset footswitch for Meris pedalseasily saves and accesses up to 4 presets on any Meris pedalinstantaneous preset switchingconnect with a single TRS cable (included)able to control multiple pedals with a simple Y cable (not included)designed fit exactly in front of 2 Meris pedalsinternal PCB socket for arduino DIY midi projects (arduino micro controller not included)no power supply requireddimensions (W x D x H) 216 x 57 x 51 mmweight 285 gincl. 1x Flat TRS cable, length 30 cm

The One Control AUX Switch is an external remote footswitch for effect pedals and belongs to the Minimal Series, which offers many useful tools and gadgets for modern pedalboards. The switching signal can be sent to the tip and/or ring of a stereo jack plug via three footswitches so that all possible devices can be switched flexibly. For example, the tap tempo of two pedals can be synchronized, the presets of up to two pedals can be changed at the same time, or two devices can be activated / bypassed at the same time.remote control switch for effects pedals and various equipmentcan be used to synchronize the tap tempo of two pedals, switch presets at the same time or use parallel active / bypass switching3 footswitches provide different switching signals on 2 output jacksseparate footswitches for T (Tip), R (Ring) and T+R (Tip and Ring) send switching signals to tip and/or ring on a stereo plugoutput jacks provide identical signalpassive operation, no power supply required2x 6.3 mm TRS output jacksdimensions (L x W x H) 66 x 112 x 48 mm / 2.60" x 4.41" x 1.89"weight 205 g / 0.45 lbs

The One Control Tri Loop is the perfect all-rounder and the Swiss army knife among the pedalboard tools. The pedal offers four selectable modes and, depending on the mode and setting, can be used as a true bypass looper, remote footswitch, A/B box, splitter, selector or momentary footswitch. In addition, the legendary BJF buffer circuit can be activated for the complete pedal (Red mode) or specifically in individual loops (Bright White mode). The momentary switching (Blue and Green mode) can be used as Normally Closed (NC) or Normally Open (NO), just as needed. The four modes can be selected easily and intuitively using the footswitches and thus offer a simple solution to countless problems.true bypass looper, remote footswitch, A/B box, splitter, selector or momentary footswitch for effects pedals4 selectable modes (Red, Bright White, Blue, Green) for different applicationsfootswitches provide control over two independent send/return loopsswitchable buffermomentary switching can be used as Normally Closed (NC) or Normally Open (NO)true bypass2 footswitches (L and R)status LEDsmetal housing6.3 mm mono in / output jacks6.3 mm mono send / return jacks1x 6.3 mm stereo send (R)power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supportedcurrent draw max. 100 mAdimensions (L x W x H) 65 x 120 x 50 mm / 2.56" x 4.72" x 1.96"weight 250 g / 0.55 lbs

preset footswitch for Red Panda pedalscompatible with Tensor (firmware 1.1 or later) and Particle V24 different operation modes (4 Preset / Remote + 2 Preset / Looper / Toggle)instantaneous preset switching and remote controlconnect with a single TRS cable (included)no power supply requireddimensions (W x D x H) 256 x 70 x 58 mmincl. TRS cable

Sync your modulation rate on-the-fly with the Source Audio Toolbox External Tap Tempo Switch. The Tap Tempo Switch is compatible with all Source Audio One Series modulation pedals. Use it to tap out the LFO speed of the Vertigo Tremolo, Lunar Phaser, Gemini Chorus, and Mercury Flanger. The Speed knob on each pedal sets the beat division to quarter, eighth, triplets, or 16th notes. South of 9 o’clock on the SPEED knob of Source Audio One Series Pedals will give you quarter note beat divisions, 9 to 12 o’clock gives you eighth notes, 12 to 3 gives you triplets, and 3 to 5 gives you 16th notes. The Tap Tempo Switch will also set the Delay Time or externally recall presets on the One Series Nemesis Delay. In addition, the Switch has a standard 1/4" output for use with compatible third-party products (normally open [NO], single pull/single throw (SPST)).remote footswitch for effects pedalsfor controlling LFO speed of Source Audio One Series modulations effectsalso compatible with some third party productsnormally open, momentary SPST footswitchmetal housing3.5 mm TRRS output for connecting with Source Audio One Series modulation pedals6.3 mm TRS output for connecting with compatible products of their manufacturersno power supply neededdimensions (L x W x H) 51 x 51 x 51 mmweight 140 gincl. 3.5 mm TRRS connection cable4 Years W-Music Distribution Warranty (product registration required)