Internal cable which easily installs between two Mercury7 or Ottobit modules to allow stereo control of the modules. When installed, the left module sends all control parameters to the right module to keep them in sync. The right module can still be set independently to allow true independent stereo operation.stereo linking cablefor linking two Meris Mercury7 or Ottobit 500 series modulessends all control parameters from the left to the right moduleright module still controllable independently for true stereo operationlength approx. 25 cm
power supply adapter cable for effect pedalsflat compact design2.1 mm x 5.5 mm barrel connector (female) to 3.5 mm / 1/8" mini plugfor effects pedals with 3.5 mm power supply jackchanges polarity from negative to positive center
power supply adapter cable for effect pedalsflat compact design2.1 mm x 5.5 mm female barrel connector to 9V battery clipfor effects pedals without power supply jack
power supply adapter cable for effect pedalsflat compact design2.1 x 5.5 mm female barrel connector to 2.5 x 5.5 mm barrel plugfor effects pedals with 2.5 x 5.5 mm power socket
Polarity reversal cable for effects pedals.
The compact, straight plug-and-jack combination ensures maximum flexibility in tight pedalboard spaces.
The cable construction, which meets instrument cable standards and features a braided copper shield, effectively minimizes electrical interference.
The cable reliably reverses polarity at the pin and is ideal for the safe operation of compatible effects pedals.power supply adapter cable for effect pedalsflat compact design2.1 x 5.5 mm straight male barrel plug to 2.1 x 5.5 mm straight female barrel jackconverts polarity from center negative to center positive or vice versaNote: Before connecting, please check the polarity requirement of the pedal
The RockBoard Flat Power Cables are high-quality power supply cables for effects pedals and were developed, based on our Flat Patch Cables. Their super compact plugs are smaller than those of most other power cables on the market. This way they save valuable pedal board space as well as potrusions over the pedalboard's edge. Other than most commonly available power cables, Rockboard Flat Power Cables do not use two parallel cable lines, but use the same design as instrument cables with a central wire surrounded by a shielding layer. This effectively prevents electrical interference into the audio signal.power supply adapter cable for effect pedalsflat compact design2.1 x 5.5 mm angled male barrel plug to 2.1 x 5.5 mm straight female barrel jackconverts polarity from center negative to center positive or vice versaNote: Before connecting, please check the polarity requirement of the pedal
The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector.
Please note:
The Power Ace USB Series does not support USB-C Power Delivery (PD) ports.
Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-A, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 30 cm / 11.81" weight 15 g / 0.5 oz
The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector.
Please note:
The Power Ace USB Series does not support USB-C Power Delivery (PD) ports.
Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-A, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 60 cm / 23.60" weight 21 g / 0.7 oz
The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector.
Please note:
The Power Ace USB Series does not support USB-C Power Delivery (PD) ports.
Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-C, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 30 cm / 11.81" weight 15 g / 0.5 oz
The Power ACE USB series provides a reliable pedal power supply from any 5 V (mobile phone) USB mains adapter. It can also provide independent battery powered operation when used with standard 5 V power banks. The 5 V output from the USB device is converted to stable 9 VDC, which is the standard for most pedals on the market. Available in two lengths and two connectors (USB-A & USB-C), this adapter is compatible with all pedals with a DC 2.1 x 5.5 mm power connector.
Please note:
The Power Ace USB Series does not support USB-C Power Delivery (PD) ports.
Please only use the Power ACE USB cable to power devices equipped with a 9 VDC connector with a 5.5 x 2.1 mm jack. If used in the opposite direction with a (multi) power supply with a 5.5 x 2.1 mm barrel connector, the device connected to the USB connector may get irreparably damaged.intelligent voltage converterconverts 5 V USB power to 9 VDCcompatible with most effects pedals (with center negative polarity)for connection to standard 5 V USB power sourcesmaximum output current 500 mA input: USB-C, 5 V output: 9 VDC, 500 mA, 2.1 x 5.5 mm barrel jack, negative centerlength 60 cm / 23.60" weight 21 g / 0.7 oz
The Power Ace Current Doubler Y-Cable is a high quality vcurrent doubling adapter cable for effect pedals to combine two separate, isolated 5.5 x 2.1 mm power slots, e.g. 2 x 150 mA to 300 mA.high quality current double cable with super compact plugsfor combining current output of two isolated power slots (e.g. 2 x 150 mA to 1 x 300 mA)2 x straight 2.1 x 5.5 mm barrel plugs (black) wired in parallel to 1 x 2.1 x 5.5 mm barrel socket (white)cable length between plug & socket 20 cm / 7 7/8"plug dimensions (L x W x H) 20.5 x 11 x 8.5 mm / 13/16" x 7/16" x 5/16"
The Power Ace Voltage Doubler Y-Cable is a high quality voltage doubling adapter cable for effect pedals to combine two separate, isolated 5.5 x 2.1 mm power slots, e.g. 2 x 9 V to 18 V.high quality voltage double cable with super compact plugsfor combining voltage output of two isolated power slots (e.g. 2 x 9V to 1 x 18V)2 x straight 2.1 x 5.5 mm barrel plugs (black) wired in serial to 1 x 2.1 x 5.5 mm barrel socket (blue)cable length between plug & socket 20 cm / 7 7/8"plug dimensions (L x W x H) 20.5 x 11 x 8.5 mm / 13/16" x 7/16" x 5/16"
This handy little gadget can be used to convert any DC input voltage between 9 V and 15 V to a stable 18 V output voltage. Many analog boost / overdrive / distortion / fuzz pedals can be operated with up to 18 VDC to provide increased headroom. The intelligent circuitry of the POWER IVC 200 automatically detects the input voltage and converts it to 18 volts. It also provides short-circuit protection for the output. Due to its small size, you can stash the POWER IVC 200 under your pedalboard with hook-and-loop tape or cable ties.voltage converter / DC-DC boosterboosts 9-15V input to 18V outputcan be used with many analog OD/boost/distortion/fuzz pedals (check manufacturer’s specs)input 9-15 VDC, 300-500 mA, 2.1 x 5.5 mm barrel jack, polarity (-) centeroutput 18 VDC, 200 mA, 2.1 x 5.5 mm barrel plug, polarity (-) centerdimensions (L x W x H) 55 x 30 x 22 mm / 2.2” x 1.2” x 0.9”weight: 30 g / 1 oz.incl. 1 x power cable, 60 cm
RBO POWER IVC 200
€19.90
*
· Delivery time: 3 days
This website uses cookies to ensure the best experience possible. More information...