Bargains

The pickup housing shows hardly any visible signs of wear. Technically, the pickup is in perfect working order and has been tested.Voiced very similar to our Original Dual Coil bass pickups, our Split-coil Reverse P design provides extended reach and a wider sensing area, allowing for a narrower pickup to work with wider-spaced strings. Original Split pickups preserve the full-bodied low end of our Original series and adding even more articulation, a simple setup, and high value. Original Splits provide you with deep lows and low-mids along with nice treble complexity for manageable growl. The coils are fully shielded and sealed so they are sweat-proof and immune from invisible noise stage and studio equipment. The cables are shielded too. Available in balanced versions for neck and bridge. The bridge pickup has a higher output than the neck pickup, so it is great for cutting through the mix when needed.Original Splits P2 Soapbar pickup for electric bass5-string versionfocused full original voicemost common 5-string soapbar shape neck positionsplit coils in reverse P configuration, hum-killingmagnetic circuit: carbon steel, brass, ceramic blade magnets (ferrite), wide aperture, opposite coil polarityDC resistance 7.4 kOhmresonant frequency 5.7 kHz64 - 80 mm / 2.52" - 3.15" sensing width2-conductor shielded coaxial cable, hot corepassiveblack coverdimensions (L x W x H) 107.7 x 31.8 x 22.9 mm / 4.24" x 1.25" x 0.90" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

The pickup housing shows hardly any visible signs of wear. Technically, the pickup is in perfect working order and has been tested.Voiced very similar to our Original Dual Coil bass pickups, our Split-coil Reverse P design provides extended reach and a wider sensing area, allowing for a narrower pickup to work with wider-spaced strings. Original Split pickups preserve the full-bodied low end of our Original series and adding even more articulation, a simple setup, and high value. Original Splits provide you with deep lows and low-mids along with nice treble complexity for manageable growl. The coils are fully shielded and sealed so they are sweat-proof and immune from invisible noise stage and studio equipment. The cables are shielded too. Available in balanced versions for neck and bridge. The bridge pickup has a higher output than the neck pickup, so it is great for cutting through the mix when needed.Original Splits P2 Soapbar pickup for electric bass5-string versionfocused full original voicemost common 5-string soapbar shape bridge positionsplit coils in reverse P configuration, hum-killingmagnetic circuit: carbon steel, brass, ceramic blade magnets (ferrite), wide aperture, opposite coil polarityDC resistance 9.7 kOhmresonant frequency 4.1 kHz64 - 80 mm / 2.52" - 3.15" sensing width2-conductor shielded coaxial cable, hot corepassiveblack coverdimensions (L x W x H) 107.7 x 31.8 x 22.9 mm / 4.24" x 1.25" x 0.90" (height incl. cable)Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. Screws and springs are not included. Due to the manufacturing process, the plastic housings of Bartolini pickups may show minor processing or handling marks. The cable ends of some pickups may also be pre-soldered. These characteristics do not constitute grounds for complaint or reason for return. Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

B-Stock: This U-Bass Solid Body 4-String in Jet Black (fretless) features a small paint chip at the neck joint. This blemish is purely cosmetic and has no effect on playability, sound, or the instrument’s technical performance. A great opportunity to get a fully functional instrument including a gig bag at an attractive price—ideal for stage, studio, or practice use.Pulling inspiration from the original California Series U-BASS®, this innovative short-scale bass is a whole new take on the U-BASS®. Its sleek off-set body shape is contoured for balance and comfort. A 23.5" scale fretless fingerboard supplies plenty of room to maneuver around & new sonic possibilities, yet it is still compact enough to easily travel with. The tone is thick and meaty thanks to the classic passive split-coil pickup. Comes with a Logo Gig Bag.Solid Body 4-String U-Bassrighthand versionfretless4-string electric bass23,5“ (597 mm) scale length33.25" (845 mm) overall lengthbolt-on neckOkoume bodyMaple neckLaurel fingerboardKala Split-Coil Pickupcontrols for volume, toneclosed bass machine heads with 1:18 ratioblack hardwareKala Round Wound stringsJet Black Gloss Finishwhite pickguardincl. Gigbag

B-Stock: Thismodel has a small paint chip on the back. The blemish is visible but minor and does not affect the playability or the fantastic sound of the instrument. Apart from this slight cosmetic imperfection, the bass is in excellent condition and offers the unique tone and playability that make the U-Bass so popular. Take advantage of this opportunity to own a fantastic instrument at a discounted price – perfect for those who appreciate the unique U-Bass sound and don’t mind a minor cosmetic blemish!Pulling inspiration from the original California Series U-BASS®, this innovative short-scale bass is a whole new take on the U-BASS®. Kala’s Solid Body U-BASS® features a sleek off-set body shape which is contoured for balance and comfort. The 22 pocketed frets and 23.5" scale give you plenty of room to maneuver around yet it is still compact enough to easily travel with. The tone is thick and meaty thanks to the classic passive split-coil pickups. This left-handed model comes with a Logo Gig Bag.Solid Body 4-String U-Basslefthand version4-string electric bass23,5“ (597 mm) scale length33.25" (845 mm) overall lengthbolt-on neckOkoume bodyMaple neckLaurel fingerboard22 nickel silver fretsKala Split-Coil Pickupcontrols for volume, toneclosed bass machine heads with 1:18 ratioblack hardwareKala Round Wound stringsTobacco Burst Gloss Finishwhite pickguardincl. Gigbag

B-Stock: The holes for the neck mounting are slightly out of the norm, but in no way impair the function and playability of the instrument.The 44-64 Custom GZ expands upon the 44-64 Custom by Utilizing EMG Geezer Butler Signature Pickups in a P&J Array. Like the other Custom models, it features a 1.5” (J) neck taper with pearl block inlay markers and Abalone accents. Unique to this model is an Ebony fingerboard board and Black Anodized Pickguard, Black Hardware and a stunning Translucent Purple Finish.Lakland Skyline 44-64 Custom Geezer Butler Signature Translucent Purple Gloss Bassrighthand version4-string electric bass34“ (864 mm) scale lengthbolt-on neckash bodymaple neckebony fingerboard10" fretboard radiusPearl Block fingerboard inlays with abalone accentsDelrin nut20 nickel silver fretsPlek'd fretwork and set-up by W-Distribution in GermanyEMG Geezer Butler Signature Split Coil (neck)EMG Geezer Butler Signature J pickup (bridge)controls for volume, volume, toneHipshot Ultralites tunersLakland Dual Access bridgeblack hardwareD'Addario EXL170 .045"- .100" stringsTranslucent Purple Gloss FinishBlack Anodized pickguardweight approx. 4.6 - 4.7 kgincl. truss rod adjustment wrenchNote: For basses, a gap between the neck and body is considered an acceptable feature. A slightly larger gap between the neck and body prevents the neck pocket from cracking due to factors such as temperature and humidity fluctuations. A larger neck gap does not affect the playability or sound of the instrument and is not a quality defect or a reason for complaint. 

B-Stock: There is a small optical color discoloration on the back of the body, which does not affect the functionality and performance of the instrument in any way. This small imperfection gives the bass character and makes it stand out from the crowdThe 55-02 has an active punch that will drive your sound clearly through any mix, with best in class tonality for a versatile and refined fit for any playing situation. The 55-02 doesn’t care if your gig is at a local tavern or the local arena. It pushes 100% pure tone every night. This Deluxe model features a gorgeous translucent Purple finish quilted maple Veneer and a 35" Scale Maple Neck and Fingerboard. The LH3 pickups and onboard preamp are the same components you’ll find in the USA Series 55-94, powered by a single 9-volt battery that can be changed by removing a simple snap-on battery cover (no screws to lose!). Internal dipswitches let you select the midrange boost/cut frequency.Lakland Skyline 55-02 Translucent Purple Gloss Bassrighthand version5-string electric bass35" (889 mm) scale lengthbolt-on neckash bodyquilted maple topmaple neckmaple fingerboard10" - 13" compound fretboard radiusBlack Dots fingerboard inlaysDelrin nut22 nickel silver fretsPlek'd fretwork and set-up by W-Distribution in GermanyLakland LH55 Dual Coil (neck)Lakland LH55 Quad Coil Soapbar (bridge)active Lakland LH3 3-band electronicscontrols for volume (pull tone bypass) / blend / bass / treble / middlebridge pickup coil select mini toggle switchHipshot Ultralites tunersLakland Dual Acces bridgechrome hardwareD'Addario EXL170-5 .045"- .130" stringsTranslucent Purple Gloss Finishincl. truss rod adjustment wrenchNote: For basses, a gap between the neck and body is considered an acceptable feature. A slightly larger gap between the neck and body prevents the neck pocket from cracking due to factors such as temperature and humidity fluctuations. A larger neck gap does not affect the playability or sound of the instrument and is not a quality defect or a reason for complaint. 

B-Stock: Please note that this particular set has some minor optical imperfections (see pictures). These imperfections are purely cosmetic and in no way affect the function or performance of the pickups. Due to these minor imperfections, we are offering this set at a special price, giving you the opportunity to purchase a high quality product at a reduced price.The pickup set consists of a Precision Bass pickup for the neck and a Jazz Bass pickup for the bridge position. This combination allows you to combine the deep, punchy sound of the P-Bass with the clear, defined tonality of the J-Bass. Each pickup is carefully crafted to ensure an optimal balance between output and clarity. Our pickups are made from high quality materials that guarantee longevity and durability. The magnets and coils are designed to provide strong signal transmission and a wide frequency spectrum. This ensures a full, rich sound with precise highs and assertive lows.The combination of P and J pickups gives you a wide range of tonal possibilities. The P-Bass pickup delivers a powerful, mid-range tone that is ideal for rock, punk and other genres that require an assertive bass. The J-Bass pickup, on the other hand, offers a crisp, articulate tone that is perfect for funk, jazz and fusion. By individually adjusting the volume and pitch of both pickups, you can easily customise your sound to suit your needs. P/J-style bass pickup set4-string versionincl. neck and bridge position (P-style M 60200 (neck), J-style M 60201L (bridge))split coil P-style pickup, stacked coil J-style pickup3-conductor cable (shield, hot, +9 V)DC resistance P 8 kOhmDC resistance J 10.8 kOhmceramic blade magnet (ferrite)sensing width P 2 x 30 mmsensing width J 78 mmactivemetal cover (brass), brushed golddimensions P (L x W x H) 67.5 x 28.4 x 19.0 mmdimensions J (L x W x H) 94.6 x 28.9 x 23.3 mmscrews and springs included- Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present. 

B-Stock: The item was already unpacked, but is in perfect technical condition. The sales packaging is not ‘new’, see pictures.MOOER has consistently pleased the guitar pedal market with its GE multi-effect range, and its latest addition, the GE1000, is set to be no exception. The GE1000, built with a futuristic and sleek “Walking Star” design, builds upon past GE products, offering an even larger range of guitar processing effects, preamps, amp simulators, and features than previous entries. The GE1000 comes preloaded with an impressive bank of guitar effects and amp simulations, but this is augmented further through MNRS GE Cloud support. MOOER’s MNRS files consist of IR samples from real amplifiers, facilitating authentic feeling tones that can be downloaded, uploaded, and shared via MOOER’s ‘GE Cloud’ app for free. The GE1000 also supports third-party IR files of up to 2048 sample points, enabling further expansion of the pedal's portfolio of amp simulators. Further adding to the GE1000’s impressive amplification and tone features, the GE1000 includes a cutting-edge AI-driven automatic equalizer, a first for MOOER. This automatically adjusts a 5-band EQ based on the user's playing and music style choice, providing further possibilities for creativity whilst still providing the flexibility of a manual-controlled EQ interface. MOOER hasn’t only focused on tone and pitch with the GE1000 exclusively, which is illustrated perfectly by the integrated Groove Station rhythmic toolkit, consisting of a style-specific drum machine and a looper. These features have been designed to work both independently and in tempo synchronization, making them adaptable for all types of jam. The looper even includes automated record and count-in functions, activating the loop recording when an input signal is detected, providing a unique hands-free looping experience. MOOER has always excelled at providing innovative UI experiences, and the GE1000 is set to continue this trend. The pedal features a 5-inch high-quality coloured touch screen designed for intuitive multi-effect workflows while keeping some fan favourites from previous GE pedals. These include the signature MOOER multi-purpose control dials, buttons, and a quick-access expression pedal. Additional flexibility can be found within the pedal’s cutting-edge control systems, including programmable MIDI ports, bundled preset management software, and compatibility with the MOOER mobile app. This level of flexibility is matched by the pedal’s audio routing solutions, which feature Bluetooth playback, USB audio interfacing, serial and parallel TRS stereo FX LOOP compatibility, and industry-standard input and output ports. The pedal will be sold in two formats: the standard GE1000, and the GE1000 Li. The latter option is installed with a Lithium-ion battery, enabling guitarists to use the pedal even when mains power is unavailable. When combined with the pedal’s synchronizable Groove Station drum machine, digital tuner, AI-driven equalizer, and looper, GE1000 users are empowered to craft fully loaded compositions without needing backing tracks, bandmates, or expensive gear. MOOER has consistently pleased the guitar pedal market with its GE multi-effect range, and its latest addition, the GE1000, is set to be no exception. The GE1000, built with a futuristic and sleek “Walking Star” design, builds upon past GE products, offering an even larger range of guitar processing effects, preamps, amp simulators, and features than previous entries. The GE1000 comes preloaded with an impressive bank of guitar effects and amp simulations, but this is augmented further through MNRS GE Cloud support. MOOER’s MNRS files consist of IR samples from real amplifiers, facilitating authentic feeling tones that can be downloaded, uploaded, and shared via MOOER’s ‘GE Cloud’ app for free. The GE1000 also supports third-party IR files of up to 2048 sample points, enabling further expansion of the pedal's portfolio of amp simulators. Further adding to the GE1000’s impressive amplification and tone features, the GE1000 includes a cutting-edge AI-driven automatic equalizer, a first for MOOER. This automatically adjusts a 5-band EQ based on the user's playing and music style choice, providing further possibilities for creativity whilst still providing the flexibility of a manual-controlled EQ interface. MOOER hasn’t only focused on tone and pitch with the GE1000 exclusively, which is illustrated perfectly by the integrated Groove Station rhythmic toolkit, consisting of a style-specific drum machine and a looper. These features have been designed to work both independently and in tempo synchronization, making them adaptable for all types of jam. The looper even includes automated record and count-in functions, activating the loop recording when an input signal is detected, providing a unique hands-free looping experience. MOOER has always excelled at providing innovative UI experiences, and the GE1000 is set to continue this trend. The pedal features a 5-inch high-quality coloured touch screen designed for intuitive multi-effect workflows while keeping some fan favourites from previous GE pedals. These include the signature MOOER multi-purpose control dials, buttons, and a quick-access expression pedal. Additional flexibility can be found within the pedal’s cutting-edge control systems, including programmable MIDI ports, bundled preset management software, and compatibility with the MOOER mobile app. This level of flexibility is matched by the pedal’s audio routing solutions, which feature Bluetooth playback, USB audio interfacing, serial and parallel TRS stereo FX LOOP compatibility, and industry-standard input and output ports. The pedal will be sold in two formats: the standard GE1000, and the GE1000 Li. The latter option is installed with a Lithium-ion battery, enabling guitarists to use the pedal even when mains power is unavailable. When combined with the pedal’s synchronizable Groove Station drum machine, digital tuner, AI-driven equalizer, and looper, GE1000 users are empowered to craft fully loaded compositions without needing backing tracks, bandmates, or expensive gear.Multi-effect processorhuge range of guitar effects, preamps and amp simulations with support for MNRS sample fileseffects signal chain fully adjustable and modifiablehigh-quality 5-inch touchscreen with intuitive user interface255 user presetsGroove Station with a drum machine and a looper with sync functionAI-controlled automatic equalizerprofessional low-latency ASIO USB audio interface (USB Type-C) with up to 192 kHz sample ratespecialized computer editor software and mobile app for preset management and sample file downloadsMIDI compatibilityswitchable serial/parallel TRS stereo FX LOOP for connection to your favourite external pedalsup to 2048 sample points for loading 3rd party IR files (50 slots for 3rd party IR loading)Up and Down footswitch to select the memory banksmultifunctional A, B, C footswitchescontrols for Master, SelectHome, Save, Settings push buttonsEffect Block LED push buttonsGND/LIFT switchWireless Bluetooth 5.0 connection for AUX inputintegrated volume / expression pedalsupport for wireless footswitch controlUSB MIDI functionaluminium housing6.3 mm mono jack input6.3 mm TRS jack send6.3 mm TRS jack return2 x 6.3 mm mono jack outputs (L / R)2 x balanced XLR (L / R) outputs5-pin DIN MIDI IN / OUT3.5 mm stereo jack headphone outputUSB Type-C connectionpower supply via included 9V DC power supply unit 2.1 mm x 5.5 mm barrel plug, polarity (-) insidebattery operation not supportedcurrent draw 1000 mAdimensions (W x D x H) 337 x 170 x 57 mm / 13.27 " x 6.69" x 2.24"weight 1.9 kg / 4.19 lbsincl. USB cable

B-Stock: Overall, the bass is in very good condition. There is some damage to the finish on one edge of the body, where the finish has chipped away, exposing the wood (see photos). This is purely a cosmetic issue. It does not affect the playability, stability, technical function, or sound of the instrument in any way. The bass plays and sounds perfectly.'- Warwick RockBass Artist Line Bootsy Collins "Space Bass"4-string electric bass34" long scale2-piece solid Mahogany body3-piece laminated Maple neck with black veneer stripesBootsy Collins "Star Shaped" Pickguard two carbon bars for neck reinforcement, from 12th to 24th fret2-way trussrodbolt-on constructionWenge fingerboard with Star inlays20" radiusnut width 38.5 mm / 1.5"24 jumbo titanium-brass alloy frets (width: 2.9 mm / height: 1.4 mm) rounded fret ends with IFT (Invisible Fretwork Technology)glow-in-the-dark side dotsWarwick Just-A-Nut III Tedur active MEC Jazz / Twin Jazz pickupsactive MEC 2-band electronicscontrols for Volume (P/P) / Balance / Treble and Bass (stacked)copper shielded electronic compartment, pickup routings with shielding paintthreaded inserts for pickup screwsWarwick machine heads2-piece Warwick 3D bridgestring spacing 19 mm / 3/4"distance E to G string 57 mm / 2 1/4"Warwick S-Security LocksWarwick RED Strings (42200 M) .045"-.105"Purple Bootsy High Polish finishchrome hardwareapprox. weight 4.1 kg / 9.0 lbs.incl. Warwick Strap and Warwick Fret Protectorincl. Warwick trussrod tool, hex key 1,5 mm, Warwick microfiber cloth and 2x Warwick S-Security Locksincl. RockBass Starline gig bag

B-Stock: Surface Tarnishing / Discoloration of the Gold PlatingThe RockBoard GOLD Series Flat Looper/Switcher Connector Cables take the concept of our Flat Looper/Switcher Connector Cables and lift them to the quality level of the GOLD Series Flat Patch Cables. Designed to be extra flat and space-saving, for optimal use of pedalboard real-estate with extra thin angled plugs and compact straight plugs optimized for use with looper/switchers. Their slim rectangular body efficiently prevents cable tangle and breakage. Their contacts and plug housings are gold-plated whilst the cables feature a double shielding of braided copper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. The GOLD Series Flat Looper/Switcher Cables guarantee best signal quality and keep your setup tidy and neat looking.high quality double shielded flat patch cables with rectangular profilecompact and super flat plugsgold-plated connectorsmetal plug housingsflexible copper conductor (20 x 0.12 mm / 36 AWG)90 % braided tinned copper shielding (4 x 16 x 0.12 mm / 36 AWG)additional aluminum foil shieldingPE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimeterconductor resistance less than 10 mOhm/decimeterangled 6.3 mm mono audio plugsoperating temperature -15° C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16", 12.5 x 12.5 mm / 1/2" x 1/2" (straight)black with gold-plated plug housingslength 100 cm / 39 3/8"

B-Stock: Surface Tarnishing / Discoloration of the Gold PlatingThe RockBoard GOLD Series Flat Looper/Switcher Connector Cables take the concept of our Flat Looper/Switcher Connector Cables and lift them to the quality level of the GOLD Series Flat Patch Cables. Designed to be extra flat and space-saving, for optimal use of pedalboard real-estate with extra thin angled plugs and compact straight plugs optimized for use with looper/switchers. Their slim rectangular body efficiently prevents cable tangle and breakage. Their contacts and plug housings are gold-plated whilst the cables feature a double shielding of braided copper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. The GOLD Series Flat Looper/Switcher Cables guarantee best signal quality and keep your setup tidy and neat looking.high quality double shielded flat patch cables with rectangular profilecompact and super flat plugsgold-plated connectorsmetal plug housingsflexible copper conductor (20 x 0.12 mm / 36 AWG)90 % braided tinned copper shielding (4 x 16 x 0.12 mm / 36 AWG)additional aluminum foil shieldingPE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimeterconductor resistance less than 10 mOhm/decimeterangled 6.3 mm mono audio plugsoperating temperature -15° C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16", 12.5 x 12.5 mm / 1/2" x 1/2" (straight)black with gold-plated plug housingslength 20 cm / 7 7/8"

B-Stock: Surface Tarnishing / Discoloration of the Gold PlatingThe RockBoard GOLD Series Flat Looper/Switcher Connector Cables take the concept of our Flat Looper/Switcher Connector Cables and lift them to the quality level of the GOLD Series Flat Patch Cables. Designed to be extra flat and space-saving, for optimal use of pedalboard real-estate with extra thin angled plugs and compact straight plugs optimized for use with looper/switchers. Their slim rectangular body efficiently prevents cable tangle and breakage. Their contacts and plug housings are gold-plated whilst the cables feature a double shielding of braided copper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. The GOLD Series Flat Looper/Switcher Cables guarantee best signal quality and keep your setup tidy and neat looking.high quality double shielded flat patch cables with rectangular profilecompact and super flat plugsgold-plated connectorsmetal plug housingsflexible copper conductor (20 x 0.12 mm / 36 AWG)90 % braided tinned copper shielding (4 x 16 x 0.12 mm / 36 AWG)additional aluminum foil shieldingPE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimeterconductor resistance less than 10 mOhm/decimeterangled 6.3 mm mono audio plugsoperating temperature -15° C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16", 12.5 x 12.5 mm / 1/2" x 1/2" (straight)black with gold-plated plug housingslength 40 cm / 15 3/4"

B-Stock: Surface Tarnishing / Discoloration of the Gold PlatingThe RockBoard GOLD Series Flat Looper/Switcher Connector Cables take the concept of our Flat Looper/Switcher Connector Cables and lift them to the quality level of the GOLD Series Flat Patch Cables. Designed to be extra flat and space-saving, for optimal use of pedalboard real-estate with extra thin angled plugs and compact straight plugs optimized for use with looper/switchers. Their slim rectangular body efficiently prevents cable tangle and breakage. Their contacts and plug housings are gold-plated whilst the cables feature a double shielding of braided copper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. The GOLD Series Flat Looper/Switcher Cables guarantee best signal quality and keep your setup tidy and neat looking.high quality double shielded flat patch cables with rectangular profilecompact and super flat plugsgold-plated connectorsmetal plug housingsflexible copper conductor (20 x 0.12 mm / 36 AWG)90 % braided tinned copper shielding (4 x 16 x 0.12 mm / 36 AWG)additional aluminum foil shieldingPE (polyethylene) signal insulationPVC cable mantlecapacitance less than 10 pF/decimeterconductor resistance less than 10 mOhm/decimeterangled 6.3 mm mono audio plugsoperating temperature -15° C to +70° C / 5° F to 158° Fouter dimensions cable (W x H) 7 x 3 mm / 1/4" x 1/8" (rectangular)outer dimensions plugs (W x H) 12.5 x 7.5 mm / 1/2" x 5/16", 12.5 x 12.5 mm / 1/2" x 1/2" (straight)black with gold-plated plug housingslength 60 cm / 23 5/8"

B-Stock: Please note that this flight case has slight visual defects which do not affect its functionality in any way. These minor blemishes make the product a particularly attractive offer!flight case for electric guitarFramus Professional Linefits most FV-style electric guitar models incl. Framus WH-1 Signature modelmade of 12 mm / 0.5" plywoodaluminum PVC surfacealuminum edgeschrome-plated ball corners2 butterfly locks (with lugs for pad locks, 6.5 mm / 0.25" diameter)4 hingesinterior foam rubber paddingneck supportinterior grey longhair plush liningsteel spring with transparent PVC covering handleinterior accessory compartment with hook and loop straps for Framus User Kitchrome hardwareinternal dimensions (L x W x D) 117 x 44.5 x 7 cm / 46.06" x 17.52" x 2.76"external dimensions (L x W x D) 128 x 58 x 17 cm / 50.39" x 22.83" x 6.69"weight 14.44 kg / 30.86 lbsShipping information: All bags in the ECO, Student and Deluxe lines are folded for shipping, depending on the model and design are folded for shipping to reduce the transport volume and thus the shipping costs. Shipping note: Guitar bags made of Premium, Artificial Leather, Leather Line and Professional Line can NOT be folded for shipping. NOT be folded for despatch. This results in a very large transport volume, which has an effect on the shipping costs incurred. 

B-Stock: Please note that this flight case has slight visual defects which do not affect its functionality in any way. These minor blemishes make the product a particularly attractive offer!flight case for electric guitarFramus Professional Linefits most FV-style electric guitar models incl. Framus WH-1 Signature modelmade of 12 mm / 0.5" plywoodaluminum PVC surfacealuminum edgeschrome-plated ball corners2 butterfly locks (with lugs for pad locks, 6.5 mm / 0.25" diameter)4 hingesinterior foam rubber paddingneck supportinterior grey longhair plush liningsteel spring with transparent PVC covering handleinterior accessory compartment with hook and loop straps for Framus User Kitchrome hardwareinternal dimensions (L x W x D) 117 x 44.5 x 7 cm / 46.06" x 17.52" x 2.76"external dimensions (L x W x D) 128 x 58 x 17 cm / 50.39" x 22.83" x 6.69"weight 14.44 kg / 30.86 lbsShipping information: All bags in the ECO, Student and Deluxe lines are folded for shipping, depending on the model and design are folded for shipping to reduce the transport volume and thus the shipping costs. Shipping note: Guitar bags made of Premium, Artificial Leather, Leather Line and Professional Line can NOT be folded for shipping. NOT be folded for despatch. This results in a very large transport volume, which has an effect on the shipping costs incurred. 

B-Stock: This is a sample PU that has been repaired.A Tele ® bridge pickup-that sounds and looks like a PU that was played for 40 years. The pickup is unwaxed, so as not to slow down the typical "twang" sound. The PU is completely "DunAged" and comes including all accessories.tele style guitar pickupclassic twangy 50s tele lead tone, custom aged for smoother treble responsebridge positionagedsingle coilAlnico II magnetsDC resistance 6.50 kOhmcloth push-back hook-up cablemedium outputblackmade in USA Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. 

B-Stock: There is a small, repaired crack in the fingerboard, which is still slightly visible. It has been professionally treated and does not affect the feel or performance of the instrument in any way.. A fantastic opportunity to get your hands on a premium-quality Sadowsky bass at a discounted price! This beautiful instrument is in full working condition, professionally set up, and delivers the outstanding tone and playability expected from a Sadowsky.Roger Sadowsky’s goal has always been to improve on bass design by making some very unique and important enhancements. Through the use of his proprietary special electronics, light-weight tuners and selected tone wood, Roger has raised this MetroExpress 21-Fret Vintage M/J 4-String Bass to a whole other level! Features of this bass include a light-weight solid Okoume body finished in Solid Silver Metallic High Polish with a transparent pickguard, a roasted maple neck and a roasted maple fingerboard, this is one fantastic looking and playing bass that we are sure you will love to play! Our MetroExpress basses are the easiest way for you to access that famous Sadowsky tone: Never harsh or shrill sounding, with strong, powerful but never muddy bass, with present, but not too aggressive mids, and a sweet, airy treble.  Model Sadowsky MetroExpress 21-Fret Vintage M/J Bass # Strings 4-String Orientation Right-Hand Scale Length 34" (864 mm) Long Scale Body Shape Sleek undersized J-Style body Body Wood Okoume, Solidbody Neck Wood Roasted Maple (C-Shape, Bolt-On) Fingerboard Wood Roasted Maple Inlays White dot inlays Fingerboard Radius 12" Nut Sadowsky Just-A-Nut III Nut Width 1.5" (38.5 mm) Nut String Spacing Nut string spacing (all strings): 1.22" / 31 mm Neck width at 12th fret 2.22" / 56.3 mm neck width at 12th fret Neck width at last fret 2.59" / 65.7 mm neck width at last fret Neck thickness at 1st fret 0.82" / 20.8 mm neck thickness at 1st fret Neck thickness at 12th fret 0.96" / 24.6 mm neck thickness at 12th fret # Frets 21 Nickel Silver (width: 0.094" (2.4 mm) / height: 0.051" (1.3 mm)) Neck Pickup Sadowsky passive hum-cancelling J-Style pickup Bridge Pickup Sadowsky passive Humbucker (Quad Coil) with Alnico V Magnets Preamp Active Sadowsky 2-way electronics (Bass and Treble boost) Controls Volume / Balance / Treble / Bass Push/Pull Function Push/pull function at Bass knob for preamp bypass Machine Heads Sadowsky Light Open Gear Machine Heads Security Locks Sadowsky S-Security Locks Bridge Sadowsky bridge with quick string release Bridge Total String Spacing 2.24" / 57 mm Hardware Color Chrome Strings Sadowsky Silver Label, Stainless Steel, 045 - 105 Finish Solid Silver Metallic High Polish Pickguard Transparent Weight Approx. 9.5lbs / 4.3kg (can vary) Protector Sadowsky Fretboard Protector Tools Hex key tools Bag / Case Sadowsky PortaBag Other Made In China Notes

B-Stock: There is a small flaw in the finish that is slightly visible. An excellent bass at a special price—perfect for the stage, the studio, or as a high-quality backup. A real bargain for anyone looking for a high-quality Sadowsky bass at a reduced price! This beautiful bass comes from our regular production line and is fully functional, professionally set up, and sounds absolutely first-class—just as you would expect from a Sadowsky.Roger Sadowsky has always improved bass design by making some very unique and important enhancements. Thanks to his proprietary special electronics, light-weight tuners and selected tone wood, Roger offers you the Sadowsky MetroExpress 24-Fret Modern 4-String Bass, an instrument at home both on stage and at home. Features include a light-weight solid Okoume body fitted with Soapbar pickups, finished in Solid Sage Green Metallic High Polish and with a roasted maple neck and a morado fingerboard. Together this makes one formidable bass that you are going to love to play! Best of all, the accessible price gives you access to that famous Sadowsky tone: Never harsh or shrill sounding, with strong, powerful but never muddy bass, with present, but not too aggressive mids, and a sweet, airy treble.  Model Sadowsky MetroExpress 24-Fret Modern Bass # Strings 4-String Orientation Right-Hand Scale Length 34" (864 mm) Long Scale Body Shape Sleek undersized body with two octave note range and deeper cutaways Body Wood Okoume, Solidbody Neck Wood Roasted Maple (C-Shape, Bolt-On) Fingerboard Wood Morado Inlays White dot inlays Fingerboard Radius 12" Nut Sadowsky Just-A-Nut III Nut Width 1.5" (38.5 mm) Nut String Spacing Nut string spacing (all strings): 1.22" / 31 mm Neck width at 12th fret 2.22" / 56.3 mm neck width at 12th fret Neck width at last fret 2.59" / 65.7 mm neck width at last fret Neck thickness at 1st fret 0.82" / 20.8 mm neck thickness at 1st fret Neck thickness at 12th fret 0.96" / 24.6 mm neck thickness at 12th fret # Frets 24 Nickel Silver (width: 0.094" (2.4 mm) / height: 0.051" (1.3 mm)) Neck Pickup Sadowsky passive Soapbar in modern position Bridge Pickup Sadowsky passive Soapbar in modern position Preamp Active Sadowsky 2-way electronics (Bass and Treble boost) Controls Volume / Balance / Treble / Bass Push/Pull Function Push/pull function at Bass knob for preamp bypass Machine Heads Sadowsky Light Open Gear Machine Heads Security Locks Sadowsky S-Security Locks Bridge Sadowsky bridge with quick string release Bridge Total String Spacing 2.24" / 57 mm Hardware Color Chrome Strings Sadowsky Silver Label, Stainless Steel, 045 - 105 Finish Solid Sage Green Metallic High Polish Pickguard None Weight Approx. 9.5lbs / 4.3kg (can vary) Protector Sadowsky Fretboard Protector Tools Hex key tools Bag / Case Sadowsky PortaBag Other Made In China Notes

B-Stock: The pickup has small cracks between the pole pieces, which has no influence on the function, but is merely an optical defect.This bridge Hybrid Humbucker pairs the lush vintage warmth of the '59 model with the hotter crunch of Seymour Duncan's Custom series humbuckers. It combines the best qualities of both pickups because it IS both pickups. Expect crisp, clear highs, ample lows, and aggressive midrange growl in humbucking mode. Splitting the coils yields the strong, full sound of the Custom coil with its 7.1k dc resistance. The dynamics are superb: The 59/Custom Hybrid snarls when you dig in, but cleans up when you lighten up. This powerful, versatile, and expressive pickup is particularly suited to lead guitar work. Includes screws, springs, and wiring instructions.This bridge Hybrid Humbucker pairs the lush vintage warmth of the '59 model with the hotter crunch of Seymour Duncan's Custom series humbuckers. It combines the best qualities of both pickups because it IS both pickups. Expect crisp, clear highs, ample lows, and aggressive midrange growl in humbucking mode. Splitting the coils yields the strong, full sound of the Cust- humbucker guitar pickuphybrid model using one coil from the 59 model and one coil from the Duncan Custommismatched coilsbridge positiondual coilAlnico V magnetwax pottedDC resistance 11.2 kOhmshielded 4 conductor hook-up cablemedium outputzebramade in USA Note: The return and refund policy does not apply to pickups, if their cables have been cut or soldered, or other damage affecting the condition of the goods is present.om coil with its 7.1k dc resistance. The dynamics are superb: The 59/Custom Hybrid snarls when you dig in, but cleans up when you lighten up. This powerful, versatile, and expressive pickup is particularly suited to lead guitar work. Includes screws, springs, and wiring instructions.Note: Replacement pickups may differ slightly in shape and dimensions from the original pickups. Adjustments may be necessary. It is recommended that you check the schematic drawings carefully. Deviations in the size and shape of the pickups do not constitute grounds for complaint. 

B-Stock: This Warwick bass cabinet comes from our showroom and has been used exclusively for demonstration purposes. It is in very good condition with only slight signs of wear. Technically, the cabinet is flawless and has been thoroughly checked and tested by our specialist staff. Now available at a special price – ideal for anyone looking for professional sound at an attractive price!Bass cabinet1 x 15 Warwick Custom SpeakerBass reflex cabinetRugged metal grill300 Watts4 ohmsSPL 105db96 dbResonant frequency: 30HzFrequency range: 30Hz – 3000Hz2 coaxial, lockable Speakercable connectors Dimensions in mm (W/H/D) 600 x 660 x 480Weight: 27kg

B-Stock:  This Warwick bass cabinet comes from our showroom and has been used exclusively for demonstration purposes. It is in very good condition with only slight signs of wear. Technically, the cabinet is flawless and has been thoroughly checked and tested by our specialist staff. Now available at a special price – ideal for anyone looking for professional sound at an attractive price!bass speaker cabinet4 x 8" Celestion speakersimpedance 8 Ohmspower rating 600 watts1" Celestion Neodymium compression HF driverbass reflex housing2 x dual purpose jacks (compatible with 2-Pin lockable coaxial und 6,3 mm TS speaker cables)4-way HF volume rotary switchsensitivity 94 dBfrequency range 65 Hz to 20 kHzdimensions (W x D x H) 520 x 540 x 400 mm / 20 1/5" x 21" x 16"weight 21.90 kg / 46.3 lbs.