Guitar Amps Poweramps

The PowerStage line of compact power amps provides high-headroom class-D amplification to guitarists looking to deliver the sound of their preamp, pedal chain, or amp modeler to the masses. The PowerStage 100 Stereo provides features demanded by the modern guitarist, including stereo inputs and outputs that each drive 100 watts of transparent sound to your cabinets. Perfect for amplifying the sound of modern modeling units to on-stage cabinets, the PS100 Stereo also offers an extended EQ section and balanced line outs with switchable analog cabinet simulation for more authentic projection through any sound system. The stereo sounds developed in your amp modeler, multi effects-unit, or preamp will be delivered with clarity through any pair of speakers, all in a package small enough to fit on your pedalboard.guitar power amp2x 100 Watts at 4 Ohmscan power cabinets with 4-8 Ohmssuitable for direct amplification of effects pedalssmall enough for placement on pedalboardsCab Sim and EQ switchable for balanced output5-band EQ (Bass +/- 13.2 dB at 74 Hz, Low-Mid +/- 13.5 dB at 389 Hz, Hi-Mid +/-13.5 at 1.55 kHz, Treble +/- 13.6 dB at 6.6 kHz, Presence +/- 13.6 dB at 11.00 kHz)controls for Level, Bass, Low-Mid, Hi-Mid, Treble and PresenceCab Sim On/Off switchEQ On/Off switchpower amp EQ On/Off switchrear-mounted power switch2 rear-mounted 6.3 mm mono (L/R) inputs2 rear-mounted 6.3 mm mono (L/R) speaker outputs2 rear-mounted (L/R) balanced output (XLR)rear-mounted IEC socketstatus LEDs for power indicator, power amp clipping and preamp clippingoutput impedance min 4 ohmsinput voltage 100-240V ACdimensions (L x W x H) 157 x 127 x 63.5 mm / 6.2" x 5.0" x 2.5"weight 1.31 kg / 2.89 lbs

The Mooer Baby Bomb 30 provides true 30 Watts of power to drive any guitar cabinet with an impedance of 8-16 Ohms. It is a perfect partner of your favorite preamp pedal. With just one simple control, the Baby Bomb is easy to setup. Connect your pedalboard to the input and the output to your guitar speaker cabinet using a speaker cable. Set the presence switch to warm or bright and adjust the volume control. If you push the volume control past 12 o´clock, the Baby Bomb provides a warm, tube-like overdrive, which feels natural and is touch responsive. It’s ideal for any musician on the move who needs to pack light.guitar power ampcomplete amplifier power stage in the size of a micro pedal30 Watts maximum outputsuitable for direct amplification of effects pedalsdelivers smooth post stage overdrive at higher settingsMaster volume controlWarm/Bright toggle switch for adjusting the presence settingstatus LEDoutput impedance 8-16 Ohmspower supply via included 24V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) centerbattery operation not supporteddimensions (L x W x H) 94 mm x 42 mm x 52 mmweight 144 g

PowerStage 170 is a revolutionary pedal-board power amp designed for guitarists using pedals, modelers and effects processors to create their tone. Maybe you love your tube amp but don’t want to lug it around. Or you use a modeler that has a ton of functionality but doesn’t sound as good when plugged in to your amp. Do you dread fly dates or gigs because you’re never sure what your backline will be? This is a 170-watt power amp with a beautiful clean preamp section and 3-band global EQ, making it the perfect complement to pedalboards and digital modeling devices. It is small enough to fit directly on a pedalboard or in any gig bag, lightweight enough for fly dates and attractive enough to look great at a church or coffeehouse gig, in a home office or in a dorm room.guitar power amp170 Watts at 4 Ohmscan power cabinets with 4-16 Ohmssuitable for direct amplification of effects pedalssmall enough for placement on pedalboards3-band EQ13 dB boost/cut at each frequency bandcontrols for Volume, Bass, Mid and Treblerear-mounted power switchrear-mounted 6.3 mm mono input/output jacksrear-mounted IEC socketPower status LEDTemperature status LEDO.C. status LEDoutput impedance 4-8 Ohmsinput voltage 220-240V ACdimensions (L x W x H) 127 mm x 133 mm x 72 mmweight 910 gmade in USA

The Seymour Duncan PowerStage 200 is a pedalboard-mounted power amp that delivers clean, musical volume for players who rely on modelers or stompboxes, with gig-friendly features that will also pay dividends in the studio and rehearsal space. Pumping out 200 watts in a compact, slick-looking enclosure, the PowerStage 200 goes way beyond simply taking your tone and making it louder. A carefully voiced 4-band EQ lets you dial in your sound for any room or any cab. The DI output features switchable speaker simulation, so you can send a consistent tone to the front of house night after night, with no need to mic your cabinet. Backline and flyout gigs are a breeze with the PowerStage 200. Show up, run a cable to you cab, and you're good to go. And when you bypass your distortion and overdrive pedals, the PS 200's full, warm sound will serve as your clean tone. You can even adjust the big master volume knob with your foot, boosting your solos in real time. The benefits of the PowerStage 200 extend into the studio and the rehearsal room, as well. The speaker simulation makes it possible to record your pedalboard straight into your DAW. The Aux In jack allows you to jam along with drum grooves and backing tracks while practicing, which is obviously a live show boon as well, giving loopers, solo artists, and coffeehouse singer-song-writers more options when performing. The headphone out - with level control - lets you practice silently with full, speaker-emulated tone and it also gives you the option of in-ear monitoring on a gig. The PowerStage 200 - compact, musical power for pedals, modelers, and much more.compact pedalboard-mounted power amp200 Watts at 4 Ohmscan power cabinets with 4-16 Ohmssuitable for direct amplification of effects pedalssmall enough for placement on pedalboardsCab Sim and EQ switchable for phones and balanced output4-band EQ (Bass +/- 10 dB at 87 Hz, Mid +/- 10 dB at 645 Hz, Treble +/- 8.5 dB at 4.4 kHz, Presence +/- 6.8 dB at 11.6 kHz)Cab Sim On/Off switchEQ On/Off switchcontrols for Level, Bass, Mid, Treble, Presence, Phonesrear-mounted power switchrear-mounted 6.3 mm mono input/output jacksrear-mounted 3,5 mm phones outputrear-mounted 3.5 mm Aux input jackrear-mounted balanced output (XLR)rear-mounted IEC socketstatus LEDs for power indicator, power amp clipping and preamp clippingoutput impedance min 4 ohmsinput voltage 100-240V ACdimensions (L x W x H) 157 x 127 x 63.5 mm / 6.2" x 5.0" x 2.5"weight 1.3 kg (2.87 lbs)

PowerStage 700 is a revolutionary power amp designed specifically for guitarists using modelers, pedals and effects processors to create their tone. Maybe you love your tube amp but don’t want to lug it around. Or you use a modeler that has a ton of functionality but doesn’t sound as good when hooked up to your existing amp or direct to the PA. Perhaps you have the ultimate pedalboard and just need a better way of amplifying or running it direct. Do you dread fly dates or gigs because you’re never sure what your backline will be? PowerStage is the answer, whether you’re playing live or recording in the studio. When you create your tone from a modeler, pedals or effects processor, what you want is a clean, transparent power source that brings your tone to life. With PowerStage 700, you can bring your whole rig to the gig without compromising your sound, breaking your back or draining your bank account.guitar power amp700 Watts at 4 Ohms / 350 Watts at 8 Ohmscan power cabinets with 4-16 Ohmssuitable for direct amplification of effects pedals3-band EQ13 dB boost/cut at each frequency bandrear-mounted Power switch2 front-mounted 6.3 mm mono (L/R) inputs2 rear-mounted (L/R) SpeakOn/6.3 mm combo outputs2 rear-mounted (L/R) XLR outputs2 rear-mounted Cab Sim switches (one per XLR output)rear mounted IEC socketstatus LEDtemperature LEDO.C. LEDoutput impedance 4-8 Ohmsinput voltage 100-230V ACdimensions (L x W x H) 292 mm x 176 mm x 56 mmweight 2,860 gincl. rack ears for rack mountingmade in USA