Guitar Amps E-Guitar Amp Heads

Over the past few decades, Bjorn Juhl has crafted and designed amplifiers for famous players and studio performers all over the world. However, the price points of his hand-made amplifiers have put them out of reach for the majority of guitarists. The One Control BJF-S66 makes Bjorn's designs and vision attainable for players on any budget. For the BJF-S66, Juhl identified the legendary American black-face amps built in the mid-1960's as the basis for his tonal palette. These amps have long been celebrated as great 'plug & play' amplifiers, as well as fantastic pedal platforms for guitarists who enjoy having a lot of tonal variety at their feet. The BJF-S66 guitar amp uses an extremely efficient Class D power amp design, and the preamp is a discrete, solid-state all analog signal path for pure tone. The ultra compact BJF-S66 features 2 channels - rhythm and lead, with adjustable lead boost - plus 3-band EQ controls, a bright switch, channel-specific reverb level and decay controls, and tremolo controls. With modern design and build techniques, the BJF-S66 captures the essence of that famed mid-60's sound, while being small and light enough to fit into a gig bag and robust enough to handle the rigors of the road. The included FS-P3S Footswitch is connected via a CAT5 cable and switches FX Loop (On/Off), Channel Select and Tremolo (On/Off).compact, lightweight guitar amplifier headsolid-state design, class D amplifier circuitry100 W at 4 ohms / 66 W at 8 ohms / 30 W at 16 ohms2 switchable channels (Rhythm / Lead)3-band EQ (Bass: +/- 20 dB at 70 Hz, Mid: +/- 10 dB at 450 Hz, Treble: +/- 20 dB at 2 kHz)switchable bright setting offers +10 dB boost at 4 kHzseparate reverb section with adjustable Level and Decay for each channelintegrated tremolo section, combined for both channelsFX Loop (On/Off), Channel Select and Tremolo (On/Off) can be controlled via the One Control FS-P3 Footswitch or optional single-latching footswitchesfront panel controls for Master Rhythm, Master Lead, Lead Boost, Gain, Treble, Bass, Mid, 2x Reverb Decay, 2x Reverb Level, Tremolo Depth, Tremolo Speedfront panel switches for Channel (Rhythm / Lead), Tremolo (On/Off), Bright Boost (On/Off)front connections for 6.35 mm (1/4") instrument inputrear-mounted Power On / Off switchrear connections for DC In, Tremolo Footswitch, Channel Footswitch, FX Loop Footswitch, Speaker Out, Pre-Amp Out, FX Loop Send, FX Loop Return (6.35 mm (1/4") jack) and One Control FS-P3Sinput voltage 24V DC (power supply included)dimensions BJF-S66 (W x D x H): 26.5 x 9.5 x 10.3 cm / 10.23" x 3.54" x 4.05"weight 1.62 kg / 3.57 lbsincl. FS P3S footswitch

The One Control BJF-S100 brings the rock sounds from the late 1960s to the early 80s, and is an ultra-small "plexi-voiced" British amplifier sound that is still a touchstone for "rock" guitar amplifiers. Light, loud, expressive, and loaded with features. We have spent many years in development with Björn Juhl (BJF) to bring this amplifier to guitarists everywhere. By combining a solid-state preamplifier with a Class D power amplifier section, we have achieved a compact, lightweight and loud tone. The all-analog circuit was developed based on the model of the UK style vacuum tube amplifier head produced since the 60s. This solid-state circuit is designed to operate similar to the actual vacuum tube amplifier­; not just a reproduction of the preamp, but also the operation and feedback of the power amplifier. In addition, we incorporated a delay of up to 600 ms, which reproduces "that" tape echo, often used at the same time as the amplifier in the early 70s. Like the tape head sound of that classic echo, if you repeat the feedback the sound will become warmer and the distortion will increase. This warm echo tone does not intrude upon your base guitar sound and can add depth and presence to the guitar tone. The preamp section of the BJF-S100 consists of two channels. The Lead channel creates a higher gain distortion as when pushing the vacuum tube amplifier hard. It not only distorts with similar sounds, but also reproduces the expressive power and playing feel that can be controlled by the volume knob and dynamic touch on the guitar. In addition, the BJF-S100 further expands the gain range and covers the brown sound from the legendary "modded amp head" a young guitarist in Los Angeles made history with. The Rhythm channel is modeled on the clean tone used by the legendary guitarists, especially in the late 60s and early 70s. If you raise the GAIN, you can also make the classic British overdrive tone, rich with overtones and presence. Both channels have a set of Master, Presence, Tone Stack, and Delay controls so you can use each to create the optimal tone for rhythm and lead and further change the depth. Dial in a shimmery rhythm sound with just a little ambience and air, then switch to a completely browned-out lead tone with trippy echoes. The BJF-S100 can create excellent tones with many British-style guitar cabinets, including the classic "V30" speaker, well known as one of the most common guitar speakers. In particular, it has the great potential with the Celestion G12MH and the Celestion EVH speakers. The output section delivers 100 watts of output at 4 Ohm, 66 watts at 8 Ohm, and 30 watts output at 16 Ohm.compact, lightweight guitar amplifier headsolid-state design, class D amplifier circuitrybrown sound in a compact size100 W at 4 ohm / 66 W at 8 ohm / 30 W at 16 ohm2 switchable channels (Rhythm / Lead)3-band EQ per channelDelay section with adjustable level, time and repeat for each channelFX Loop (On/Off), Channel Select and Delay (On/Off) can be controlled via optional single-latching footswitches or the One Control FS-P3 Footswitch (sold separately)front panel controls for Gain, Mid, Bass, Treble, Time, Level, Repeat, Presence, Master Lead, Gain, Mid, Bass, Treble, Time, Level Repeat Presence Master Rhythmfront panel switches for Channel (Rhythm / Lead), Clarity and Body (Lead Channel)front connections for 6.35 mm (1/4") instrument inputrear-mounted Power On / Off switchrear connections for DC In, Delay Footswitch, Channel Footswitch, FX Loop Footswitch, Speaker Out, Pre-Amp Out, FX Loop Send, FX Loop Return (6.35 mm (1/4") jack) and One Control FS-P3 (RJ12)input voltage 24V DC (power supply included)dimensions (W x D x H): 26.5 x 11.8 x 10.3 cm / 10.23" x 4.65" x 4.05"weight: 1.76 kg / 3.88 lbs

The RockBoard® PowerMODs are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system The combination of the compact, lightweight design, the powerful sound and the low-noise operation makes the RockBoard® PowerMODs an affordable and reliable pedalboard power amplifier for beginners, discerning musicians and experienced professionals.compact amplifier for pedalboardscan be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboardssolid-state design, class D amplifier circuitrypower (@1% THD): 50 W at 4 Ohm / 30 W at 8 Ohm3-band EQfront panel controls for Volume, Low, Mid, Highfront-mounted Cab-Sim switchfront-mounted Mute switchfront-mounted 6.35 mm (1/4") speaker outputfront-mounted 3.5 mm (1/8") headphone outputfront-mounted 3.5 mm (1/8") AUX IN input for external audio signalsfront-mounted balanced XLR DI output rear-mounted connection for included power supply adapter rear-mounted instrument input including 220 - 240 VAC power adapter, output 24 VDC, 2.25 Adimensions (L x W x H) 175 x 116 x 47 mm / 6.88" x 4.56" x 1.85"weight 0.84 kg / 1.86 lbs (including power supply)

The RockBoard® PowerMODs are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system The combination of the compact, lightweight design, the powerful sound and the low-noise operation makes the RockBoard® PowerMODs an affordable and reliable pedalboard power amplifier for beginners, discerning musicians and experienced professionals.compact amplifier for pedalboardscan be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboardssolid-state design, class D amplifier circuitrypower (@1% THD): 118 W at 4 Ohm / 70 W at 8 Ohm3-band EQfront panel controls for Volume, Low, Mid, Highfront-mounted Cab-Sim switchfront-mounted Mute switchfront-mounted 6.35 mm (1/4") speaker outputfront-mounted 3.5 mm (1/8") headphone outputfront-mounted 3.5 mm (1/8") AUX IN input for external audio signalsfront-mounted balanced XLR DI output rear-mounted connection for included power supply adapter rear-mounted instrument input including 220 - 240 VAC power adapter, output 36 VDC, 4.16 Adimensions (L x W x H) 175 x 116 x 47 mm / 6.88" x 4.56" x 1.85"weight 1.2 kg / 2.65 lbs (including power supply)