Bass Amps Bass Amp Heads

The BP-200 bass amplifier from Phil Jones Bass redefines tone to go in a no compromise, high performance 200 Watt design that can fit into a backpack for the gigging, studio, and practicing bassist on the go. The BP-200 is packed with the features and inspirational PJB tone that musicians have come to expect while its size and weight and a fair price make it the ultimate in affordable portable bass amps. The BP-200 is a D-Class power amplifier and a pure class A single channel pre-amplifier housed in a machined aluminum/steel enclosure. D-Class amplifiers are highly efficient and therefore produce far less heat than the conventional class AB amplifiers. Other features include a switchable input for active and passive basses, mute switch, 3 Band EQ, headphone out jack, variable input sensitivity control to match instrument output with amplifier, sub sonic filter to reduce excessive loudspeaker cone motion, balanced line out with pre/post EQ and ground lift switches, pre amp output, line out jack with Neutrik high-current socket which can accommodate ¼ jack or a Speakon plug, 200 Watts RMS at 4 Ohms and 120 Watts RMS at 8 Ohms. The BP-200 will work on any AC voltage from 100- 240 volts AC enabling it to conveniently travel worldwide without having to switch to local AC supply voltages.lightweight bass amplifier headsolid-state design200 watt at 4 ohms / 120 watt at 8 ohmssub sonic filter to reduce unnecessary loudspeaker cone motionnoiseless cooling due to no fan operationclass A preampclass D power amplifier3 band EQ with +/- 15 dB boost/cut per bandfront panel controls for Input Level, Bass, Mid, Treble, Volumefront mounted 3 way toggle switch for Mute / Active / Passiverear-mounted Pre / Post EQ switch rear-mounted Ground / Lift switchPower on / off switchfront connection for instrument Input (6.3 mm mono), Aux In (3.5 mm stereo), Headphone out (3.5 mm stereo)rear connections for DI Out (XLR), Speaker Out (Neutrik Speakon 2-pin), AC Input (IEC socket)input voltage 100/240V ACaluminum housingdimensions (W x D x H) 176 x 170 x 53 mm / 6.9" x 6.7" x 2.1weight 1.22 kg / 2.7 lbsincl. power cord with EU plug

lightweight bass amplifier headsolid-state design800 watt at 4 ohms / 400 watt at 8 ohmssub sonic filter to reduce unnecessary loudspeaker cone motionnoiseless cooling due to no fan operationclass A low noise preampclass D power amplifier5 band EQ with +/- 18 dB boost/cut per bandserial effects loopfront panel controls for Lo-Bass, Hi-Bass, Mid, Lo-Treble, Hi-Treble, Input Level, Aux Level, Volumefront mounted 3 way toggle switch for Mute / Active / Passiverear-mounted Pre / Post EQ toggle switch rear-mounted Ground / Lift switchPower on / off switchfront connection for instrument Input (6.3 mm mono), Aux In (3.5 mm stereo), Headphone out (3.5 mm stereo)rear connections for Line In (6.3 mm mono), Line Out (6.3 mm mono), FX Send (6.3 mm mono), FX Return (6.3 mm mono), Speaker Out (Neutrik NL4 Speakon), AC Input (IEC socket)input voltage 100/240V ACaluminum housingdimensions (W x D x H) 190 x 317 x 63 mm / 7.5" x 12.5" x 2.5weight 2.59 kg / 5.7 lbsincl. power cord with EU plug

lightweight bass amplifier headsolid-state design350 watt at 4 ohms / 200 watt at 8 ohmsnoiseless cooling without fanclass D amplifier circuitryquiet and extremely reliableclass D power amplifier5 band EQ with +/- 18 dB boost/cut per bandserial effects loopfront panel controls for Level, Lo-Bass, Hi-Bass, Lo-Mid, Hi-Mid, Treble, Limiter, Volumefront-mounted 3 way toggle switch for Mute / Active / Passivefront-mounted Limiter toggle switchrear-mounted Pre / Post EQ switchrear-mounted Ground / Lift Power switchfront-side connections for Input (6.3 mm mono)rear side connections for DI Output (XLR), FX Send / Return (2 x 6.3 mm mono), Pre-Amp Out (6.3 mm mono), Headphone Out (3.5 mm stereo), Speaker Out (Neutrik NL4MP Speakon 2-pin), AC Input (IEC socket)input voltage 100/240V ACrack-mount compatible aluminum housing (1 HU)dimensions (W x H x D) 244 x 193 x 43 mm / 9.6" x 7.6" x 1.7"weight 1.3 kg / 2.9 lbsincl. power cord with EU plug

PowerStage 700 Bass is the ultimate solution for bass players seeking power, portability, and pristine sound quality. Designed by Seymour Duncan’s legendary engineer Kevin Beller, a lifelong bass player, this 700-watt bass head delivers unparalleled clarity and performance in a lightweight, rugged package. Whether plugging in on stage or in the studio, PowerStage 700 Bass provides tight low end and rich harmonics, with a footswitchable built-in overdrive for an extra layer of sonic versatility. A robust, bass-optimized EQ (treble, low mid, high mid, bass and presence) tailors your sound to any room. Need to switch between active and passive basses? You’re covered - PowerStage 700 Bass includes a convenient -10db pad control. Multiple output options (¼”, Speakon, XLR DI, and headphone) work for any setup, whether powering cabinets, going direct to a PA, or recording straight into your audio interface. PowerStage 700 Bass is compact and durable for easy transport yet powerful enough to fill any venue. This world-class bass head can also serve as the ideal clean power platform to amplify your preamp or modeler. Streamline your rig without compromising your sound and focus on what truly matters - your musicbass amplifier headsolid-state design700 watt at 4 ohms / 350 watt at 8 ohmspreamp voiced for a wide range of vintage and modern bass sounds4 band EQ, sweepable mid controls, and presence button offer dynamic tone shaping possibilitiesswitchable overdrive for additional tonal versatilityeffects loop allows for post-preamp processing and easy integration with modelers and preamp pedalscontrols for Gain, Drive, Level, Bass, Lo Mid, Freq, Hi Mid Freq, Treble, Masterswitches for -10dB, Engage, Mute, Pre/Post, Presence, EQ Bypass, Ground Liftfront connections for instrument input (6.3 mm mono jack), aux input (3.5 mm stereo jack)rear connections for OD footswitch (6.3 mm mono jack), headphones (6.3 mm mono jack) DI Out (XLR), FX Send and Return (2 x 6.3 mm mono jack), 2x Speaker Output (Speakon / jack combo socket), IEC power socketinput voltage 100/240V ACdimensions (W x D x H) 333 x 231 x 84 mm / 13.1" x 9.09" x 3.31"weight 2.58 kg / 5.69 lbsmade in USA

The Warwick Gnome bass amplifier head offers bassists a clear, defined bass sound and impressive power - all packed in a super compact, lightweight design that will easily fit in your pocket! The Gnome amp heads were developed to offer transparent, crisp and noise-free performance combined with an ultra-portable, lightweight design in an affordable and reliable amp for discerning musicians and for the seasoned professionals. The 3-band EQ with +/- 15 dB cut/boost per band offers a lot of options to shape the sound according to your own ideas and the balanced post-EQ XLR DI output with switchable ground lift offers an easy way to use the Warwick Gnome for live gigs or studio recordings. Silent practicing is also possible if you disconnect the speaker output and use only your headphones.ultra-portable, lightweight bass amplifier headsolid-state design, class D amplifier circuitry200 W at 4 ohms / 130 W at 8 ohms3-band EQ with +/- 15 dB cut/boost per band6.35 mm (1/4") headphone output for silent practicepost-EQ balanced XLR DI output with switchable ground liftmore than 10 Mohms input impedance provide maximum sensitivity for passive pickupscan be mounted on RockBoard pedalboards with the RockBoard QuickMount Type D (not included)front panel controls for Gain, Bass, Middle, Treble, Masterrear-mounted Ground Lift switchrear-mounted Power On / Off switchfront connections for 6.35 mm (1/4") instrument input and 6.35 mm (1/4") headphone outputrear connections for mains in (IEC socket), 6.35 mm (1/4") speaker out and balanced XLR DI outinput voltage 220 - 240V ACdimensions (L x W x H) 170 x 118 x 45.5 mm / 6 11/16" x 4 41/64" x 1 51/64"weight 0.96 kg / 2.12 lbsfits in optionally available RockBoard Effects Pedal Bag No. 03 (RBO EPB 03), not included in the delivery230V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 230V mains voltage. Other mains voltages can damage the device.)

The Warwick Gnome i bass amplifier head offers bassists a clear, defined bass sound and impressive power - all packed in a super compact, lightweight design that will easily fit in your pocket! The Gnome i amp heads were developed to offer transparent, crisp and noise-free performance combined with an ultra-portable, lightweight design in an affordable and reliable amp for discerning musicians and for the seasoned professionals. The Warwick Gnome i offers an easy-to-use audio interface without any special driver or software requirements. The USB audio interface allows you to connect your Gnome amp to a PC, MAC or compatible mobile device to record your playing or to process your signal using digital audio software plug-ins. The 3-band EQ with +/- 15 dB cut/boost per band offers a lot of options to shape the sound according to your own ideas and the balanced post-EQ XLR DI output with switchable ground lift offers an easy way to use the Warwick Gnome i for live gigs or studio recordings. Silent practicing is also possible if you disconnect the speaker output and use only your headphones.ultra-portable, lightweight bass amplifier head with USB interfacesolid-state design, class D amplifier circuitry200 W at 4 ohms / 130 W at 8 ohms3-band EQ with +/- 15 dB cut/boost per band6.35 mm (1/4") headphone output for silent practicepost-EQ balanced XLR DI output with switchable ground liftmore than 10 Mohms input impedance provide maximum sensitivity for passive pickupscan be mounted on RockBoard pedalboards with the RockBoard QuickMount Type D (not included)USB audio interface for PC, MAC or compatible mobile devices, no drivers or special software requiredsupported sampling rates: 44.1 kHz and 48 kHzfront panel controls for Gain, Bass, Middle, Treble, Masterrear-mounted Ground Lift switchrear-mounted Power On / Off switchfront connections for 6.35 mm (1/4") instrument input and 6.35 mm (1/4") headphone outputrear connections for mains in (IEC socket), 6.35 mm (1/4") speaker out, USB Type-B port and balanced XLR DI outinput voltage 220 - 240V ACdimensions (L x W x H) 170 x 118 x 45.5 mm / 6 11/16" x 4 41/64" x 1 51/64"weight 0.98 kg / 2.16 lbsfits in optionally available RockBoard Effects Pedal Bag No. 03 (RBO EPB 03), not included in the delivery230V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 230V mains voltage. Other mains voltages can damage the device.)

The Warwick Gnome i Pro 600 bass amplifier head offers bassists a clear, defined bass sound and impressive power - all packaged in a super-compact, lightweight design. Gnome amp heads were developed to provide beginners, discerning musicians and seasoned professionals with an affordable and reliable amplifier that features an ultra-portable, lightweight design and delivers transparent, crisp sound and noise-free operation. The Warwick Gnome i Pro 600 features an easy-to-use audio interface with no special drivers or software required. Using the USB Type B audio interface, the Gnome amplifier can be connected to a PC, MAC or compatible mobile device to process or record the audio signal using digital audio software plug-ins. The 4-band EQ with +/- 15 dB cut/boost for each band gives you plenty of options to shape the sound to your liking, and the pre/post EQ switchable, balanced XLR DI output with switchable ground lift makes the Warwick Gnome i Pro 600 easy to use in live situations or in the studio. The headphone jack also allows you to use the amp for silent practicing, and the front panel Aux-in allows you to plug in audio/line signals.compact, lightweight bass amplifier head with USB interfacesolid-state design, class D amplifier circuitry600 W at 4 Ohms / 350 W at 8 Ohms 4-band EQ with +/- 15 dB cut/boost per bandinput impedance of more than 10 MOhms offers maximum sensitivity for passive pickups6.35 mm (1/4") headphone output for silent practiceUSB audio interface for PC, MAC or compatible mobile devices, no drivers or special software requiredsupported sampling rates: 44.1 kHz and 48 kHzfront panel connections for instrument input (6.35 mm / 1/4", mono) with switchable mute function, Aux input (3.5 mm / 1/8", stereo) and headphone output (6.35 mm / 1/4", stereo) front panel controls for Gain, Bass, Mid Low, Mid High, Treble, Master front panel input MUTE switchfront panel LED indication for SIG (signal) and MUTErear panel Power On / Off switchrear panel dimming control for blue ambient lightrear panel balanced XLR DI output with Pre/Post EQ switch and ground lift switchrear panel connections for Mains (IEC socket), 2 x parallel speaker out (speaker jacks) and USB type B portrear panel SEND and RETURN jacks for the FX LOOP (6.35 mm / 1/4", mono) input voltage 220 - 240V ACdimensions (L x W x H) 280 x 195 x 78 mm / 11 1/32" x 7 43/64" x 3 5/64" weight 3.01 kg / 6.62 lbs230V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 230V mains voltage. Other mains voltages can damage the device.)fits in optionally available RockBoard Effects Pedal Bag No. 04 (RBO EPB 04), not included in the delivery

The Warwick Gnome i Pro V2 bass amplifier head offers bassists a clear, defined bass sound and impressive power - all packed in a super-compact, lightweight design that will easily fit in your pocket! The Gnome i Pro V2 amp heads were developed to offer transparent, crisp, and noise-free performance combined with an ultra-portable, lightweight design in an affordable and reliable amp for discerning musicians and for seasoned professionals. The Warwick Gnome i Pro V2 offers an easy-to-use audio interface without any special driver or software requirements. The USB audio interface allows you to connect your Gnome amp to a PC, MAC or compatible mobile device to record your playing or to process your signal using digital audio software plug-ins. The 3-band EQ with +/- 15 dB cut/boost per band offers a lot of options to shape the sound according to your own ideas and the balanced post-EQ XLR DI output with switchable ground lift offers an easy way to use the Warwick Gnome i Pro V2 for live gigs or studio recordings. Silent practicing is also possible if you disconnect the speaker output and use only your headphones. The front-mounted 1/8" auxiliary input can be used to connect audio/line sources.ultra-portable, lightweight bass amplifier head with USB interfacesolid-state design, class D amplifier circuitry300 W at 4 ohms / 180 W at 8 ohms 3-band EQ with +/- 15 dB cut/boost per band6.35 mm (1/4") headphone output for silent practicepost-EQ balanced XLR DI output with switchable ground liftmore than 10 Mohms input impedance provides maximum sensitivity for passive pickupscan be mounted on RockBoard pedalboards with the RockBoard QuickMount Type D (not included)USB audio interface for PC, MAC or compatible mobile devices, no drivers or special software requiredsupported sampling rates: 44.1 kHz and 48 kHzfront panel controls for Gain, Bass, Middle, Treble, Masterrear-mounted Ground Lift switchrear-mounted Power On / Off switchfront connections for 6.35 mm (1/4") instrument input, 3.5 mm (1/8", stereo) Aux input and 6.35 mm (1/4") headphone outputrear connections for mains in (IEC socket), 6.35 mm (1/4") speaker out, USB type B port and balanced XLR DI outinput voltage 220 - 240V ACdimensions (L x W x H) 200 x 137 x 49 mm / 7 7/8" x 5 25/64" x 1 59/64" weight 1.35 kg / 2.98 lbsfits in optionally available RockBoard Effects Pedal Bag No. 03 (RBO EPB 03), not included in the delivery230V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 230V mains voltage. Other mains voltages can damage the device.)

Unleash your sound with this ultimate Dual Channel bass amp head. Power, versatility and precision in a compact format - the Warwick Amplification DS Series Bass Amp Head brings everything you need to elevate your bass playing experience. Whether you're gigging on stage, jamming in the studio, or practicing at home, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with two independent channels, each featuring its own gain control and 4-band EQ for precise sound shaping. Perfect your tone with the built-in compressor and always stay tuned with the ultra-sensitive tuning feature. Bluetooth and USB features, parallel FX LOOP, DI OUT, AUX IN and LINE OUT connections - even bi-amping capability - this amp head provides all connectivity options you could possibly need on stage or in the studio. Whether you're refining your sound for recording, crafting new music, or rocking your next gig, the WA DS Series Bass Amp Head gives you everything you need to be at your best. Bring your sound to life and experience next-level bass performance.double stage bass amplifier head with USB and Bluetooth interfacesolid-state design, class D amplifier circuitrydual channel designBluetooth and USB connectivitytuning featurecab emulatorFX loop, AuxIn, DI Out, Bi-Amp Line Out 300 W at 4 Ohms / 180 W at 8 Ohms 4-band EQ with Mid presetsincl. compressor controlstacked 2-channel front panel controls for Gain, Bass, Lo Mid, Hi Mid, Treble, Volume2-channel front panel FREQ selector switches for Lo Mid and Hi Midfront panel channel selector switchfront panel compressor controls for Amount / Level (stacked)front panel compressor switchfront panel Bluetooth switchfront panel TUNER switchfront panel tuner indicationfront panel LED CLIP indicationfront panel LED channel indicationfront panel MUTE switchfront panel Headphone output (3.5 mm / 1/8", stereo) 2 front panel INPUT jacks (6.35 mm / 1/4", mono) rear panel Power On / Off switchrear panel AUX IN jack (3.5 mm / 1/8", stereo) rear panel SEND and RETURN jacks for FX LOOP (6.35 mm / 1/4", mono) with separate level controlsrear panel balanced XLR DI output with Pre/Post EQ switch and ground lift switchrear panel Cab Emulator selector switch (OFF + 3 modes)2 x rear panel Speaker Twist speaker jacks rear panel Line-Out jack (6.35 mm / 1/4", mono) with FullRange/Bi-Amp switchrear panel USB-B Port rear panel footswitch jack for channel and compressor rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 100 Wdimensions (L x W x H) 250 x 270 x 74 mm / 9.84" x 10.63" x 2,91" weight 3.32 kg / 7.31 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)

Unleash your sound with this ultimate Dual Channel bass amp head. Power, versatility and precision in a compact format - the Warwick Amplification DS Series Bass Amp Head brings everything you need to elevate your bass playing experience. Whether you're gigging on stage, jamming in the studio, or practicing at home, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with two independent channels, each featuring its own gain control and 4-band EQ for precise sound shaping. Perfect your tone with the built-in compressor and always stay tuned with the ultra-sensitive tuning feature. Bluetooth and USB features, parallel FX LOOP, DI OUT, AUX IN and LINE OUT connections - even bi-amping capability - this amp head provides all connectivity options you could possibly need on stage or in the studio. Whether you're refining your sound for recording, crafting new music, or rocking your next gig, the WA DS Series Bass Amp Head gives you everything you need to be at your best. Bring your sound to life and experience next-level bass performance.double stage bass amplifier head with USB and Bluetooth interfacesolid-state design, class D amplifier circuitrydual channel designBluetooth and USB connectivitytuning featurecab emulatorFX loop, Aux-In, DI Out, Bi-Amp Line Out 500 W at 4 Ohms / 300 W at 8 Ohms 4-band EQ with Mid presetsincl. compressor controlstacked 2-channel front panel controls for Gain, Bass, Lo Mid, Hi Mid, Treble, Volume2-channel front panel FREQ selector switches for Lo Mid and Hi Midfront panel channel selector switchfront panel compressor controls for Amount / Level (stacked)front panel compressor switchfront panel Bluetooth switchfront panel TUNER switchfront panel tuner indicationfront panel LED CLIP indicationfront panel LED channel indicationfront panel MUTE switchfront panel Headphone output (3.5 mm / 1/8", stereo) 2 front panel INPUT jacks (6.35 mm / 1/4", mono) rear panel Power On / Off switchrear panel AUX IN jack (3.5 mm / 1/8", stereo) rear panel SEND and RETURN jacks for FX LOOP (6.35 mm / 1/4", mono) with separate level controlsrear panel balanced XLR DI output with Pre/Post EQ switch and ground lift switchrear panel Cab Emulator selector switch (OFF + 3 modes)2 x rear panel Speaker Twist speaker jacks rear panel Line-Out jack (6.35 mm / 1/4", mono) with FullRange/Bi-Amp switchrear panel USB-B Port rear panel footswitch jack for channel and compressor rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 150 Wdimensions (L x W x H) 250 x 270 x 74 mm / 9.84" x 10.63" x 2,91" weight 3.47 kg / 7.65 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)

Unleash your sound with this ultimate Dual Channel bass amp head. Power, versatility and precision in a compact format - the Warwick Amplification DS Series Bass Amp Head brings everything you need to elevate your bass playing experience. Whether you're gigging on stage, jamming in the studio, or practicing at home, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with two independent channels, each featuring its own gain control and 4-band EQ for precise sound shaping. Perfect your tone with the built-in compressor and always stay tuned with the ultra-sensitive tuning feature. Bluetooth and USB features, parallel FX LOOP, DI OUT, AUX IN and LINE OUT connections - even bi-amping capability - this amp head provides all connectivity options you could possibly need on stage or in the studio. Whether you're refining your sound for recording, crafting new music, or rocking your next gig, the WA DS Series Bass Amp Head gives you everything you need to be at your best. Bring your sound to life and experience next-level bass performance.double stage bass amplifier head with USB and Bluetooth interfacesolid-state design, class D amplifier circuitrydual channel designBluetooth and USB connectivitytuning featurecab emulatorFX loop, AuxIn, DI Out, Bi-Amp Line Out 800 W at 4 Ohms / 480 W at 8 Ohms 4-band EQ with Mid presetsincl. compressor controlstacked 2-channel front panel controls for Gain, Bass, Lo Mid, Hi Mid, Treble, Volume2-channel front panel FREQ selector switches for Lo Mid and Hi Midfront panel channel selector switchfront panel compressor controls for Amount / Level (stacked)front panel compressor switchfront panel Bluetooth switchfront panel TUNER switchfront panel LED CLIP indicationfront panel LED channel indicationfront panel tuner indicationfront panel MUTE switchfront panel Headphone output (3.5 mm / 1/8", stereo) 2 front panel INPUT jacks (6.35 mm / 1/4", mono) rear panel Power On / Off switchrear panel AUX IN jack (3.5 mm / 1/8", stereo) rear panel SEND and RETURN jacks for FX LOOP (6.35 mm / 1/4", mono) with separate level controlsrear panel balanced XLR DI output with Pre/Post EQ switch and ground lift switchrear panel Cab Emulator selector switch (OFF + 3 modes)2 x rear panel Speaker Twist speaker jacks rear panel Line-Out jack (6.35 mm / 1/4", mono) with FullRange/Bi-Amp switchrear panel USB-B Port rear panel footswitch jack for channel and compressor rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 200 Wdimensions (L x W x H) 250 x 270 x 74 mm / 9.84" x 10.63" x 2,91" weight 3.63 kg / 8.00 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)

Unleash your sound with this ultimate Multi Connect bass amp head. Power, versatility and precision in a compact format - the Warwick Amplification MC Series Bass Amp Head brings everything you need to elevate your bass playing experience. Whether you're gigging on stage, jamming in the studio, or practicing at home, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with a 4-band EQ for precise sound shaping and always stay tuned with the ultra-sensitive tuning feature. Bluetooth and USB features, parallel FX LOOP, DI OUT, AUX IN and LINE OUT connections - even Bi-amping capability - this amp head provides all connectivity options you could possibly need on stage or in the studio. Whether you're refining your sound for recording, crafting new music, or rocking your next gig, the WA MC Series Bass Amp Head gives you everything you need to be at your best. Bring your sound to life and experience next-level bass performance.bass amplifier head with USB and Bluetooth interfacesolid-state design, class D amplifier circuitrysingle channel designBluetooth and USB connectivitytuning featureFX loop, AuxIn, DI Out, Bi-Amp Line Out 300 W at 4 Ohms / 180 W at 8 Ohms 4-band EQ +/- 15 dB cut/boost per bandfront panel controls for Gain, Bass / Lo Mid (stacked), Hi Mid / Treble (stacked), Volume front panel LED CLIP indicationfront panel Bluetooth switchfront panel TUNER switchfront panel tuner indicationfront panel MUTE switchfront panel Headphone output (3.5 mm / 1/8", stereo) front panel INPUT jack (6.35 mm / 1/4", mono) rear panel Power On / Off switchrear panel AUX IN jack (3.5 mm / 1/8", stereo) rear panel SEND and RETURN jacks for FX LOOP (6.35 mm / 1/4", mono) with separate level controlsrear panel balanced XLR DI output with Pre/Post EQ switch and ground lift switchrear panel Speaker Twist speaker jack rear panel Line-Out jack (6.35 mm / 1/4", mono) with FullRange/Bi-Amp switchrear panel USB-B Port rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 100 Wdimensions (L x W x H) 250 x 270 x 63 mm / 9.84" x 10.63" x 2,48" weight 3.09 kg / 6.81 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)

Unleash your sound with this ultimate Multi Connect bass amp head. Power, versatility and precision in a compact format - the Warwick Amplification MC Series Bass Amp Head brings everything you need to elevate your bass playing experience. Whether you're gigging on stage, jamming in the studio, or practicing at home, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with a 4-band EQ for precise sound shaping and always stay tuned with the ultra-sensitive tuning feature. Bluetooth and USB features, parallel FX LOOP, DI OUT, AUX IN and LINE OUT connections - even Bi-amping capability - this amp head provides all connectivity options you could possibly need on stage or in the studio. Whether you're refining your sound for recording, crafting new music, or rocking your next gig, the WA MC Series Bass Amp Head gives you everything you need to be at your best. Bring your sound to life and experience next-level bass performance.bass amplifier head with USB and Bluetooth interfacesolid-state design, class D amplifier circuitrysingle channel designBluetooth and USB connectivitytuning featureFX loop, Aux-In, DI Out, Bi-Amp Line Out 500 W at 4 Ohms / 300 W at 8 Ohms 4-band EQ +/- 15 dB cut/boost per bandfront panel controls for Gain, Bass / Lo Mid (stacked), Hi Mid / Treble (stacked), Volume front panel LED CLIP indicationfront panel Bluetooth switchfront panel TUNER switchfront panel tuner indicationfront panel MUTE switchfront panel Headphone output (3.5 mm / 1/8", stereo) front panel INPUT jack (6.35 mm / 1/4", mono) rear panel Power On / Off switchrear panel AUX IN jack (3.5 mm / 1/8", stereo) rear panel SEND and RETURN jacks for FX LOOP (6.35 mm / 1/4", mono) with separate level controlsrear panel balanced XLR DI output with Pre/Post EQ switch and ground lift switchrear panel Speaker Twist speaker jack rear panel Line-Out jack (6.35 mm / 1/4", mono) with Full Range/Bi-Amp switchrear panel USB-B Port rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 150 Wdimensions (L x W x H) 250 x 270 x 63 mm / 9.84" x 10.63" x 2,48" weight 3.20 kg / 7.05 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)

Unleash your sound with this ultimate Multi Stage 800 Watt amp head. Power, versatility and precision in a compact format — the Warwick Amplification MS 800 Bass Amp Head brings everything you need to elevate your bass playing experience. Whether you're gigging on stage, jamming in the studio, or practicing at home, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with two independent channels, each featuring its own gain control and 4-band EQ for precise sound shaping. For grittier sounds, this amp is equipped with a switchable overdrive control for each individual channel. Perfect your tone with the built-in compressor and always stay tuned with the ultra-sensitive tuning feature. Bluetooth and USB features, parallel FX LOOP, DI OUT, AUX IN and LINE OUT connections - even Bi-amping capability - this amp head provides all connectivity options you could possibly need on stage or in the studio. Whether you're refining your sound for recording, crafting new music, or rocking your next gig, the WA MS 800 Bass Amp Head gives you everything you need to be at your best. Bring your sound to life and experience next-level bass performance.double stage bass amplifier head with overdrive and USB + Bluetooth interfacesolid-state design, class D amplifier circuitrydual channel designBluetooth and USB connectivitytuning featurecab emulatorFX loop, AuxIn, DI Out, Bi-Amp Line Out 800 W at 4 Ohms / 480 W at 8 Ohms 4-band EQ with Mid presetsincl. compressor controlincl. separate DRIVE control for each channelstacked 2-channel front panel controls for Drive, Gain, Bass, Lo Mid, Hi Mid, Treble, Volume2-channel front panel FREQ selector switches for Lo Mid and Hi Midfront panel channel selector switchfront panel compressor controls for Amount / Level (stacked)front panel compressor switchfront panel drive switch for each channelfront panel Bluetooth switchfront panel TUNER switchfront panel LED CLIP indicationfront panel LED channel indicationfront panel tuner indicationfront panel MUTE switchfront panel Headphone output (3.5 mm / 1/8", stereo) 2 front panel INPUT jacks (6.35 mm / 1/4", mono) rear panel Power On / Off switchrear panel AUX IN jack (3.5 mm / 1/8", stereo) rear panel SEND and RETURN jacks for FX LOOP (6.35 mm / 1/4", mono) with separate level controlsrear panel balanced XLR DI output with Pre/Post EQ switch and ground lift switchrear panel Cab Emulator selector switch (OFF + 3 modes)2 x rear panel Speaker Twist speaker jacks rear panel Line-Out jack (6.35 mm / 1/4", mono) with FullRange/Bi-Amp switchrear panel USB-B Port rear panel footswitch jack for channel and compressor rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 200 Wdimensions (L x W x H) 250 x 270 x 74 mm / 9.84" x 10.63" x 2,91" weight 3.64 kg / 8.02 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)

Unleash the full potential of your sound with this ultimate bass Power Amplifier head. Power, versatility and precision in a compact format - the Warwick Amplification PA Series Bass Power Amplifier brings everything you need to elevate your bass playing experience. Designed for audiophiles and professional musicians alike, this powerhouse delivers crystal-clear low-end performance with unparalleled depth and precision. Whether you're gigging on stage or jamming in the studio, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with a 4-band EQ for precise sound shaping, mute your amp with the push of a button or use the LINE OUT connection to configure complex setups for studio or stage.power amplifier head for bass guitarsolid-state design, class D amplifier circuitry300 W at 4 Ohms / 180 W at 8 Ohms 4-band EQ +/- 15 dB cut/boost per bandfront panel controls for Bass, Lo Mid, Hi Mid, Treble, Volume front panel MUTE switchfront panel Power On / Off switchfront panel LED CLIP indicationrear panel Line-In jack (6.35 mm / 1/4", mono) rear panel Line-Out jack (6.35 mm / 1/4", mono) rear panel Speaker Twist speaker jack rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 100 Wdimensions (L x W x H) 250 x 270 x 63 mm / 9.84" x 10.63" x 2,48" weight 3.01 kg / 6.63 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)

Unleash the full potential of your sound with this ultimate bass Power Amplifier head. Power, versatility and precision in a compact format - the Warwick Amplification PA Series Bass Power Amplifier brings everything you need to elevate your bass playing experience. Designed for audiophiles and professional musicians alike, this powerhouse delivers crystal-clear low-end performance with unparalleled depth and precision. Whether you're gigging on stage or jamming in the studio, this amp head delivers unbeatable performance with features designed for the modern bassist. Tailor your tone with a 4-band EQ for precise sound shaping, mute your amp with the push of a button or use the LINE OUT connection to configure complex setups for studio or stage.power amplifier head for bass guitarsolid-state design, class D amplifier circuitry500 W at 4 Ohms / 300 W at 8 Ohms 4-band EQ +/- 15 dB cut/boost per bandfront panel controls for Bass, Lo Mid, Hi Mid, Treble, Volume front panel MUTE switchfront panel Power On / Off switchfront panel LED CLIP indicationrear panel Line-In jack (6.35 mm / 1/4", mono) rear panel Line-Out jack (6.35 mm / 1/4", mono) rear panel Speaker Twist speaker jack rear panel connections for Mains (IEC socket)rear panel voltage select switch (120/240 VAC) input voltage 120 - 240 VAC / 50-60 Hz / 150 Wdimensions (L x W x H) 250 x 270 x 63 mm / 9.84" x 10.63" x 2,48" weight 3.13 kg / 6.90 lbs230 V EU version incl. power cord with EU plug (Warning: The device can only be used in countries with 120-230 V mains voltage. Other mains voltages can damage the device.)